diff options
Diffstat (limited to 'patches/binutils/2.17a')
| -rw-r--r-- | patches/binutils/2.17a/100-uclibc-conf.patch | 149 | ||||
| -rw-r--r-- | patches/binutils/2.17a/110-arm-eabi-conf.patch | 24 | ||||
| -rw-r--r-- | patches/binutils/2.17a/120-makeinfo-version.patch | 16 | ||||
| -rw-r--r-- | patches/binutils/2.17a/130-ld_makefile_patch.patch | 24 | ||||
| -rw-r--r-- | patches/binutils/2.17a/140-better_file_error.patch | 17 | ||||
| -rw-r--r-- | patches/binutils/2.17a/150-check_ldrunpath_length.patch | 21 | ||||
| -rw-r--r-- | patches/binutils/2.17a/160-mips-ELF_MAXPAGESIZE-4K.patch | 28 | ||||
| -rw-r--r-- | patches/binutils/2.17a/170-bfd-hash-tweak.patch | 23 | ||||
| -rw-r--r-- | patches/binutils/2.17a/180-psignal.patch | 29 | ||||
| -rw-r--r-- | patches/binutils/2.17a/190-skip-comments.patch | 95 | ||||
| -rw-r--r-- | patches/binutils/2.17a/200-cross-gprof.patch | 22 | ||||
| -rw-r--r-- | patches/binutils/2.17a/210-i386-no-divide-comment.patch | 64 |
12 files changed, 512 insertions, 0 deletions
diff --git a/patches/binutils/2.17a/100-uclibc-conf.patch b/patches/binutils/2.17a/100-uclibc-conf.patch new file mode 100644 index 00000000..267b76c3 --- /dev/null +++ b/patches/binutils/2.17a/100-uclibc-conf.patch @@ -0,0 +1,149 @@ +diff -dur binutils-2.17.old/bfd/configure binutils-2.17/bfd/configure +--- binutils-2.17.old/bfd/configure 2006-06-23 20:17:03.000000000 +0200 ++++ binutils-2.17/bfd/configure 2007-05-01 18:26:03.000000000 +0200 +@@ -3576,7 +3576,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + lt_cv_deplibs_check_method=pass_all + ;; + +diff -dur binutils-2.17.old/binutils/configure binutils-2.17/binutils/configure +--- binutils-2.17.old/binutils/configure 2006-04-06 23:49:29.000000000 +0200 ++++ binutils-2.17/binutils/configure 2007-05-01 18:26:03.000000000 +0200 +@@ -3411,7 +3411,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + lt_cv_deplibs_check_method=pass_all + ;; + +diff -dur binutils-2.17.old/configure binutils-2.17/configure +--- binutils-2.17.old/configure 2006-04-06 23:49:25.000000000 +0200 ++++ binutils-2.17/configure 2007-05-01 18:26:03.000000000 +0200 +@@ -1276,7 +1276,7 @@ + am33_2.0-*-linux*) + noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + ;; +- sh-*-linux*) ++ sh*-*-linux*) + noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + ;; + sh*-*-pe|mips*-*-pe|*arm-wince-pe) +@@ -1584,7 +1584,7 @@ + romp-*-*) + noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}" + ;; +- sh-*-* | sh64-*-*) ++ sh*-*-* | sh64-*-*) + case "${host}" in + i[3456789]86-*-vsta) ;; # don't add gprof back in + i[3456789]86-*-go32*) ;; # don't add gprof back in +diff -dur binutils-2.17.old/configure.in binutils-2.17/configure.in +--- binutils-2.17.old/configure.in 2006-06-23 20:19:53.000000000 +0200 ++++ binutils-2.17/configure.in 2007-05-01 18:26:03.000000000 +0200 +@@ -468,7 +468,7 @@ + am33_2.0-*-linux*) + noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + ;; +- sh-*-linux*) ++ sh*-*-linux*) + noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + ;; + sh*-*-pe|mips*-*-pe|*arm-wince-pe) +@@ -776,7 +776,7 @@ + romp-*-*) + noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}" + ;; +- sh-*-* | sh64-*-*) ++ sh*-*-* | sh64-*-*) + case "${host}" in + i[[3456789]]86-*-vsta) ;; # don't add gprof back in + i[[3456789]]86-*-go32*) ;; # don't add gprof back in +diff -dur binutils-2.17.old/gas/configure binutils-2.17/gas/configure +--- binutils-2.17.old/gas/configure 2006-04-06 23:49:31.000000000 +0200 ++++ binutils-2.17/gas/configure 2007-05-01 18:26:03.000000000 +0200 +@@ -3411,7 +3411,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + lt_cv_deplibs_check_method=pass_all + ;; + +diff -dur binutils-2.17.old/gprof/configure binutils-2.17/gprof/configure +--- binutils-2.17.old/gprof/configure 2006-04-06 23:49:33.000000000 +0200 ++++ binutils-2.17/gprof/configure 2007-05-01 18:26:03.000000000 +0200 +@@ -3414,6 +3414,11 @@ + lt_cv_deplibs_check_method=pass_all + ;; + ++linux-uclibc*) ++ lt_cv_deplibs_check_method=pass_all ++ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so` ++ ;; ++ + netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' +diff -dur binutils-2.17.old/ld/configure binutils-2.17/ld/configure +--- binutils-2.17.old/ld/configure 2006-04-11 12:36:26.000000000 +0200 ++++ binutils-2.17/ld/configure 2007-05-01 18:26:03.000000000 +0200 +@@ -3413,7 +3413,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + lt_cv_deplibs_check_method=pass_all + ;; + +diff -dur binutils-2.17.old/libtool.m4 binutils-2.17/libtool.m4 +--- binutils-2.17.old/libtool.m4 2005-12-27 17:37:57.000000000 +0100 ++++ binutils-2.17/libtool.m4 2007-05-01 18:26:03.000000000 +0200 +@@ -739,7 +739,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + lt_cv_deplibs_check_method=pass_all + ;; + +diff -dur binutils-2.17.old/ltconfig binutils-2.17/ltconfig +--- binutils-2.17.old/ltconfig 2005-07-16 04:36:38.000000000 +0200 ++++ binutils-2.17/ltconfig 2007-05-01 18:26:03.000000000 +0200 +@@ -602,6 +602,7 @@ + + # Transform linux* to *-*-linux-gnu*, to support old configure scripts. + case $host_os in ++linux-uclibc*) ;; + linux-gnu*) ;; + linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` + esac +@@ -1247,7 +1248,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + version_type=linux + need_lib_prefix=no + need_version=no +diff -dur binutils-2.17.old/opcodes/configure binutils-2.17/opcodes/configure +--- binutils-2.17.old/opcodes/configure 2006-02-17 15:36:28.000000000 +0100 ++++ binutils-2.17/opcodes/configure 2007-05-01 18:26:03.000000000 +0200 +@@ -3579,7 +3579,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + lt_cv_deplibs_check_method=pass_all + ;; + diff --git a/patches/binutils/2.17a/110-arm-eabi-conf.patch b/patches/binutils/2.17a/110-arm-eabi-conf.patch new file mode 100644 index 00000000..88d3a4f5 --- /dev/null +++ b/patches/binutils/2.17a/110-arm-eabi-conf.patch @@ -0,0 +1,24 @@ +diff -dur binutils-2.17.old/configure binutils-2.17/configure +--- binutils-2.17.old/configure 2007-05-01 18:26:03.000000000 +0200 ++++ binutils-2.17/configure 2007-05-01 18:26:06.000000000 +0200 +@@ -1305,7 +1305,7 @@ + arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* ) + noconfigdirs="$noconfigdirs target-libffi target-qthreads" + ;; +- arm*-*-linux-gnueabi) ++ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi) + noconfigdirs="$noconfigdirs target-libffi target-qthreads" + noconfigdirs="$noconfigdirs target-libjava target-libobjc" + ;; +diff -dur binutils-2.17.old/configure.in binutils-2.17/configure.in +--- binutils-2.17.old/configure.in 2007-05-01 18:26:03.000000000 +0200 ++++ binutils-2.17/configure.in 2007-05-01 18:26:06.000000000 +0200 +@@ -497,7 +497,7 @@ + arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* ) + noconfigdirs="$noconfigdirs target-libffi target-qthreads" + ;; +- arm*-*-linux-gnueabi) ++ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi) + noconfigdirs="$noconfigdirs target-libffi target-qthreads" + noconfigdirs="$noconfigdirs target-libjava target-libobjc" + ;; diff --git a/patches/binutils/2.17a/120-makeinfo-version.patch b/patches/binutils/2.17a/120-makeinfo-version.patch new file mode 100644 index 00000000..50ff5dde --- /dev/null +++ b/patches/binutils/2.17a/120-makeinfo-version.patch @@ -0,0 +1,16 @@ +diff -u binutils-2.18-orig/configure binutils-2.18/configure +--- binutils-2.18-orig/configure 2007-08-06 16:29:40.000000000 -0400 ++++ binutils-2.18/configure 2007-09-27 22:41:51.000000000 -0400 +@@ -6125,10 +6125,10 @@ + *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;; + *) + +- # For an installed makeinfo, we require it to be from texinfo 4.4 or ++ # For an installed makeinfo, we require it to be from texinfo 4.6 or + # higher, else we use the "missing" dummy. + if ${MAKEINFO} --version \ +- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then ++ | egrep 'texinfo[^0-9]*(4\.([6-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then + : + else + MAKEINFO="$MISSING makeinfo" diff --git a/patches/binutils/2.17a/130-ld_makefile_patch.patch b/patches/binutils/2.17a/130-ld_makefile_patch.patch new file mode 100644 index 00000000..b40ec677 --- /dev/null +++ b/patches/binutils/2.17a/130-ld_makefile_patch.patch @@ -0,0 +1,24 @@ +diff -dur binutils-2.17.old/ld/Makefile.am binutils-2.17/ld/Makefile.am +--- binutils-2.17.old/ld/Makefile.am 2006-06-03 06:45:50.000000000 +0200 ++++ binutils-2.17/ld/Makefile.am 2007-05-01 18:26:09.000000000 +0200 +@@ -20,7 +20,7 @@ + # We put the scripts in the directory $(scriptdir)/ldscripts. + # We can't put the scripts in $(datadir) because the SEARCH_DIR + # directives need to be different for native and cross linkers. +-scriptdir = $(tooldir)/lib ++scriptdir = $(libdir) + + EMUL = @EMUL@ + EMULATION_OFILES = @EMULATION_OFILES@ +diff -dur binutils-2.17.old/ld/Makefile.in binutils-2.17/ld/Makefile.in +--- binutils-2.17.old/ld/Makefile.in 2006-06-03 06:45:50.000000000 +0200 ++++ binutils-2.17/ld/Makefile.in 2007-05-01 18:26:09.000000000 +0200 +@@ -269,7 +269,7 @@ + # We put the scripts in the directory $(scriptdir)/ldscripts. + # We can't put the scripts in $(datadir) because the SEARCH_DIR + # directives need to be different for native and cross linkers. +-scriptdir = $(tooldir)/lib ++scriptdir = $(libdir) + BASEDIR = $(srcdir)/.. + BFDDIR = $(BASEDIR)/bfd + INCDIR = $(BASEDIR)/include diff --git a/patches/binutils/2.17a/140-better_file_error.patch b/patches/binutils/2.17a/140-better_file_error.patch new file mode 100644 index 00000000..7900f17e --- /dev/null +++ b/patches/binutils/2.17a/140-better_file_error.patch @@ -0,0 +1,17 @@ +diff -dur binutils-2.17.old/bfd/opncls.c binutils-2.17/bfd/opncls.c +--- binutils-2.17.old/bfd/opncls.c 2006-03-16 13:20:16.000000000 +0100 ++++ binutils-2.17/bfd/opncls.c 2007-05-01 18:26:11.000000000 +0200 +@@ -158,6 +158,13 @@ + { + bfd *nbfd; + const bfd_target *target_vec; ++ struct stat s; ++ ++ if (stat (filename, &s) == 0) ++ if (S_ISDIR(s.st_mode)) { ++ bfd_set_error (bfd_error_file_not_recognized); ++ return NULL; ++ } + + nbfd = _bfd_new_bfd (); + if (nbfd == NULL) diff --git a/patches/binutils/2.17a/150-check_ldrunpath_length.patch b/patches/binutils/2.17a/150-check_ldrunpath_length.patch new file mode 100644 index 00000000..7c24796a --- /dev/null +++ b/patches/binutils/2.17a/150-check_ldrunpath_length.patch @@ -0,0 +1,21 @@ +diff -dur binutils-2.17.old/ld/emultempl/elf32.em binutils-2.17/ld/emultempl/elf32.em +--- binutils-2.17.old/ld/emultempl/elf32.em 2006-06-12 15:05:04.000000000 +0200 ++++ binutils-2.17/ld/emultempl/elf32.em 2007-05-01 18:26:13.000000000 +0200 +@@ -970,6 +970,8 @@ + && command_line.rpath == NULL) + { + lib_path = (const char *) getenv ("LD_RUN_PATH"); ++ if ((lib_path) && (strlen (lib_path) == 0)) ++ lib_path = NULL; + if (gld${EMULATION_NAME}_search_needed (lib_path, &n, + force)) + break; +@@ -1154,6 +1156,8 @@ + rpath = command_line.rpath; + if (rpath == NULL) + rpath = (const char *) getenv ("LD_RUN_PATH"); ++ if ((rpath) && (strlen (rpath) == 0)) ++ rpath = NULL; + if (! (bfd_elf_size_dynamic_sections + (output_bfd, command_line.soname, rpath, + command_line.filter_shlib, diff --git a/patches/binutils/2.17a/160-mips-ELF_MAXPAGESIZE-4K.patch b/patches/binutils/2.17a/160-mips-ELF_MAXPAGESIZE-4K.patch new file mode 100644 index 00000000..0a4980b5 --- /dev/null +++ b/patches/binutils/2.17a/160-mips-ELF_MAXPAGESIZE-4K.patch @@ -0,0 +1,28 @@ +diff -dur binutils-2.17.old/bfd/elf32-mips.c binutils-2.17/bfd/elf32-mips.c +--- binutils-2.17.old/bfd/elf32-mips.c 2006-03-22 10:28:13.000000000 +0100 ++++ binutils-2.17/bfd/elf32-mips.c 2007-05-01 18:26:15.000000000 +0200 +@@ -1617,7 +1617,9 @@ + + /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses + page sizes of up to that limit, so we need to respect it. */ +-#define ELF_MAXPAGESIZE 0x10000 ++/*#define ELF_MAXPAGESIZE 0x10000*/ ++/* Use 4K to shrink the elf header. NOT for general use! */ ++#define ELF_MAXPAGESIZE 0x1000 + #define elf32_bed elf32_tradbed + + /* Include the target file again for this target. */ +diff -dur binutils-2.17.old/bfd/elfn32-mips.c binutils-2.17/bfd/elfn32-mips.c +--- binutils-2.17.old/bfd/elfn32-mips.c 2005-11-23 15:04:17.000000000 +0100 ++++ binutils-2.17/bfd/elfn32-mips.c 2007-05-01 18:26:15.000000000 +0200 +@@ -2402,7 +2402,9 @@ + + /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses + page sizes of up to that limit, so we need to respect it. */ +-#define ELF_MAXPAGESIZE 0x10000 ++/*#define ELF_MAXPAGESIZE 0x10000*/ ++/* Use 4K to shrink the elf header. NOT for general use! */ ++#define ELF_MAXPAGESIZE 0x1000 + #define elf32_bed elf32_tradbed + + /* Include the target file again for this target. */ diff --git a/patches/binutils/2.17a/170-bfd-hash-tweak.patch b/patches/binutils/2.17a/170-bfd-hash-tweak.patch new file mode 100644 index 00000000..c8782826 --- /dev/null +++ b/patches/binutils/2.17a/170-bfd-hash-tweak.patch @@ -0,0 +1,23 @@ +Signed-off-by: dank@kegel.com + +Raising the size of the hash table is a noticable win when linking +at least one large app. + +There was a patch, +http://sources.redhat.com/ml/binutils/2004-06/msg00165.html +to do this dynamically. No idea why that didn't make it in. +So this tiny change to raise the default size is just +a stopgap for now. + + +--- binutils-2.17/bfd/hash.c.old 2006-03-02 23:01:39.000000000 -0800 ++++ binutils-2.17/bfd/hash.c 2006-03-02 23:01:58.000000000 -0800 +@@ -298,7 +298,7 @@ + */ + + /* The default number of entries to use when creating a hash table. */ +-#define DEFAULT_SIZE 4051 ++#define DEFAULT_SIZE 32749 + static size_t bfd_default_hash_table_size = DEFAULT_SIZE; + + /* Create a new hash table, given a number of entries. */ diff --git a/patches/binutils/2.17a/180-psignal.patch b/patches/binutils/2.17a/180-psignal.patch new file mode 100644 index 00000000..2506ff2a --- /dev/null +++ b/patches/binutils/2.17a/180-psignal.patch @@ -0,0 +1,29 @@ +Make psignal prototype in libiberty match that in glibc. + +Fixes: + +gcc-2.95.3-glibc-2.1.3/binutils-2.15/libiberty/strsignal.c: In function `psignal': +gcc-2.95.3-glibc-2.1.3/binutils-2.15/libiberty/strsignal.c:563: argument `signo' doesn't match prototype +/usr/include/signal.h:131: prototype declaration +gcc-2.95.3-glibc-2.1.3/binutils-2.15/libiberty/strsignal.c:563: argument `message' doesn't match prototype +/usr/include/signal.h:131: prototype declaration +gcc-2.95.3-glibc-2.1.3/binutils-2.15/libiberty/strsignal.c:568: warning: comparison between signed and unsigned +mprotect... make[1]: *** [strsignal.o] Error 1 +make[1]: Leaving directory `/export/hda3/dkegel/queue/jobdir.produser_cpsm17/crosstool-0.32/build/i686-unknown-linux-gnu/gcc-2.95.3-glibc-2.1.3/build-binutils/libiberty' +make: *** [all-libiberty] Error 2 + +when building on red hat 7.1 +though it's a bit of a mystery why libiberty's psignal is being compiled at +all, since red hat 7.1's glibc supports psignal (hence the error message) + +--- binutils-2.17/libiberty/strsignal.c.old 2005-04-18 13:57:40.000000000 -0700 ++++ binutils-2.17/libiberty/strsignal.c 2005-04-18 13:59:09.000000000 -0700 +@@ -536,7 +536,7 @@ + + /* + +-@deftypefn Supplemental void psignal (unsigned @var{signo}, char *@var{message}) ++@deftypefn Supplemental void psignal (int @var{signo}, const char *@var{message}) + + Print @var{message} to the standard error, followed by a colon, + followed by the description of the signal specified by @var{signo}, diff --git a/patches/binutils/2.17a/190-skip-comments.patch b/patches/binutils/2.17a/190-skip-comments.patch new file mode 100644 index 00000000..df49ad31 --- /dev/null +++ b/patches/binutils/2.17a/190-skip-comments.patch @@ -0,0 +1,95 @@ +[removed first hunk so it would apply to 2.16.1 - copyright date already updated - dank] + +Retrieved from http://sources.redhat.com/ml/binutils/2004-04/msg00646.html +Fixes +localealias.s:544: Error: junk at end of line, first unrecognized character is `,' +when building glibc-2.3.2 with gcc-3.4.0 and binutils-2.15.90.0.3 + +Paths adjusted to match crosstool's patcher. + +Message-Id: m3n052qw2g.fsf@whitebox.m5r.de +From: Andreas Schwab <schwab at suse dot de> +To: Nathan Sidwell <nathan at codesourcery dot com> +Cc: Ian Lance Taylor <ian at wasabisystems dot com>, binutils at sources dot redhat dot com +Date: Fri, 23 Apr 2004 22:27:19 +0200 +Subject: Re: demand_empty_rest_of_line and ignore_rest_of_line + +Nathan Sidwell <nathan@codesourcery.com> writes: + +> Index: read.c +> =================================================================== +> RCS file: /cvs/src/src/gas/read.c,v +> retrieving revision 1.76 +> diff -c -3 -p -r1.76 read.c +> *** read.c 12 Mar 2004 17:48:12 -0000 1.76 +> --- read.c 18 Mar 2004 09:56:05 -0000 +> *************** read_a_source_file (char *name) +> *** 1053,1059 **** +> #endif +> input_line_pointer--; +> /* Report unknown char as ignored. */ +> ! ignore_rest_of_line (); +> } +> +> #ifdef md_after_pass_hook +> --- 1053,1059 ---- +> #endif +> input_line_pointer--; +> /* Report unknown char as ignored. */ +> ! demand_empty_rest_of_line (); +> } +> +> #ifdef md_after_pass_hook + +This means that the unknown character is no longer ignored, despite the +comment. As a side effect a line starting with a line comment character +not followed by APP in NO_APP mode now triggers an error instead of just a +warning, breaking builds of glibc on m68k-linux. Earlier in +read_a_source_file where #APP is handled there is another comment that +claims that unknown comments are ignored, when in fact they aren't (only +the initial line comment character is skipped). + +Note that the presence of #APP will mess up the line counters, but +that appears to be difficult to fix. + +Andreas. + +2004-04-23 Andreas Schwab <schwab@suse.de> + + * read.c (read_a_source_file): Ignore unknown text after line + comment character. Fix misleading comment. + +--- binutils/gas/read.c.~1.78.~ 2004-04-23 08:58:23.000000000 +0200 ++++ binutils/gas/read.c 2004-04-23 21:49:01.000000000 +0200 +@@ -1008,10 +1008,14 @@ read_a_source_file (char *name) + unsigned int new_length; + char *tmp_buf = 0; + +- bump_line_counters (); + s = input_line_pointer; + if (strncmp (s, "APP\n", 4)) +- continue; /* We ignore it */ ++ { ++ /* We ignore it */ ++ ignore_rest_of_line (); ++ continue; ++ } ++ bump_line_counters (); + s += 4; + + sb_new (&sbuf); +@@ -1110,7 +1110,7 @@ read_a_source_file (char *name) + continue; + #endif + input_line_pointer--; +- /* Report unknown char as ignored. */ ++ /* Report unknown char as error. */ + demand_empty_rest_of_line (); + } + + +-- +Andreas Schwab, SuSE Labs, schwab@suse.de +SuSE Linux AG, MaxfeldstraÃe 5, 90409 NÃrnberg, Germany +Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5 +"And now for something completely different." diff --git a/patches/binutils/2.17a/200-cross-gprof.patch b/patches/binutils/2.17a/200-cross-gprof.patch new file mode 100644 index 00000000..eda79b30 --- /dev/null +++ b/patches/binutils/2.17a/200-cross-gprof.patch @@ -0,0 +1,22 @@ +--- binutils-2.17/configure.old 2004-07-21 21:36:47.000000000 -0700 ++++ binutils-2.17/configure 2004-07-21 21:37:08.000000000 -0700 +@@ -1022,7 +1022,7 @@ + + # Some tools are only suitable for building in a "native" situation. + # Remove these if host!=target. +-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf" ++native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf" + + # Similarly, some are only suitable for cross toolchains. + # Remove these if host=target. +--- binutils-2.17/configure.in.old 2004-07-21 21:37:19.000000000 -0700 ++++ binutils-2.17/configure.in 2004-07-21 21:37:34.000000000 -0700 +@@ -227,7 +227,7 @@ + + # Some tools are only suitable for building in a "native" situation. + # Remove these if host!=target. +-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf" ++native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf" + + # Similarly, some are only suitable for cross toolchains. + # Remove these if host=target. diff --git a/patches/binutils/2.17a/210-i386-no-divide-comment.patch b/patches/binutils/2.17a/210-i386-no-divide-comment.patch new file mode 100644 index 00000000..c6b3f62b --- /dev/null +++ b/patches/binutils/2.17a/210-i386-no-divide-comment.patch @@ -0,0 +1,64 @@ +diff -durN binutils-2.17.orig/gas/config/tc-i386.c binutils-2.17/gas/config/tc-i386.c +--- binutils-2.17.orig/gas/config/tc-i386.c 2006-04-07 08:40:57.000000000 +0200 ++++ binutils-2.17/gas/config/tc-i386.c 2008-09-22 09:06:07.000000000 +0200 +@@ -196,24 +196,10 @@ + #endif + ; + +-#if (defined (TE_I386AIX) \ +- || ((defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)) \ +- && !defined (TE_GNU) \ +- && !defined (TE_LINUX) \ +- && !defined (TE_NETWARE) \ +- && !defined (TE_FreeBSD) \ +- && !defined (TE_NetBSD))) + /* This array holds the chars that always start a comment. If the +- pre-processor is disabled, these aren't very useful. The option +- --divide will remove '/' from this list. */ +-const char *i386_comment_chars = "#/"; +-#define SVR4_COMMENT_CHARS 1 +-#define PREFIX_SEPARATOR '\\' +- +-#else ++ pre-processor is disabled, these aren't very useful. */ + const char *i386_comment_chars = "#"; + #define PREFIX_SEPARATOR '/' +-#endif + + /* This array holds the chars that only start a comment at the beginning of + a line. If the line seems to have the form '# 123 filename' +@@ -5486,20 +5472,6 @@ + break; + + case OPTION_DIVIDE: +-#ifdef SVR4_COMMENT_CHARS +- { +- char *n, *t; +- const char *s; +- +- n = (char *) xmalloc (strlen (i386_comment_chars) + 1); +- t = n; +- for (s = i386_comment_chars; *s != '\0'; s++) +- if (*s != '/') +- *t++ = *s; +- *t = '\0'; +- i386_comment_chars = n; +- } +-#endif + break; + + default: +@@ -5525,13 +5497,8 @@ + fprintf (stream, _("\ + -s ignored\n")); + #endif +-#ifdef SVR4_COMMENT_CHARS +- fprintf (stream, _("\ +- --divide do not treat `/' as a comment character\n")); +-#else + fprintf (stream, _("\ + --divide ignored\n")); +-#endif + } + + #if ((defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)) \ |