From 86297c41a26f18d924e64fc93321c59cbc4c48dd Mon Sep 17 00:00:00 2001 From: Thomas Bushnell Date: Mon, 26 Apr 1999 05:58:44 +0000 Subject: 1998-11-30 OKUJI Yoshinori Clean up linux emulation code to make it architecture-independent as much as possible. * linux: Renamed from linuxdev. * Makefile.in (objfiles): Add linux.o instead of linuxdev.o. (MAKE): New variable. Used for the linux.o target. * configure.in: Add AC_CHECK_TOOL(MAKE, make). * i386/i386/spl.h: Include , for compatibility with OSF Mach 3.0. Suggested by Elgin Lee . * linux/src: Renamed from linux/linux. * linux/dev: Renamed from linux/mach. * linux/Drivers.in (AC_INIT): Use dev/include/linux/autoconf.h, instead of mach/include/linux/autoconf.h. * Makefile.in (all): Target ../linux.o instead of ../linuxdev.o. * linux/dev/drivers/block/genhd.c: Include instead of . * linux/dev/drivers/net/auto_irq.c: Remove unneeded header files, and . * linux/dev/init/main.c: Many i386-dependent codes moved to ... * linux/dev/arch/i386/irq.c: ... here. * linux/dev/arch/i386/setup.c: New file. * linux/dev/arch/i386/linux_emul.h: Likewise. * linux/dev/arch/i386/glue/timer.c: Merged into sched.c. * linux/dev/arch/i386/glue/sched.c: Include instead of , and moved to ... * linux/dev/kernel/sched.c: ... here. * linux/dev/arch/i386/glue/block.c: Include and , instead of i386-dependent header files, and moved to ... * linux/dev/glue/blocl.c: ... here. * linux/dev/arch/i386/glue/net.c: Include and , instead of i386-dependent header files, and moved to ... * linux/dev/glue/net.c: ... here. * linux/dev/arch/i386/glue/misc.c: Remove `x86' and moved to ... * linux/dev/glue/misc.c: ... here. * linux/dev/arch/i386/glue/kmem.c: Moved to ... * linux/dev/glue/kmem.c: ... here. --- linux/src/drivers/scsi/dtc.h | 169 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 169 insertions(+) create mode 100644 linux/src/drivers/scsi/dtc.h (limited to 'linux/src/drivers/scsi/dtc.h') diff --git a/linux/src/drivers/scsi/dtc.h b/linux/src/drivers/scsi/dtc.h new file mode 100644 index 00000000..4c41237b --- /dev/null +++ b/linux/src/drivers/scsi/dtc.h @@ -0,0 +1,169 @@ +/* + * DTC controller, taken from T128 driver by... + * Copyright 1993, Drew Eckhardt + * Visionary Computing + * (Unix and Linux consulting and custom programming) + * drew@colorado.edu + * +1 (303) 440-4894 + * + * DISTRIBUTION RELEASE 1. + * + * For more information, please consult + * + * + * + * and + * + * NCR 5380 Family + * SCSI Protocol Controller + * Databook + * + * NCR Microelectronics + * 1635 Aeroplaza Drive + * Colorado Springs, CO 80916 + * 1+ (719) 578-3400 + * 1+ (800) 334-5454 + */ + +#ifndef DTC3280_H +#define DTC3280_H + +#define DTC_PUBLIC_RELEASE 1 + +/*#define DTCDEBUG 0x1*/ +#define DTCDEBUG_INIT 0x1 +#define DTCDEBUG_TRANSFER 0x2 + +/* + * The DTC3180 & 3280 boards are memory mapped. + * + */ + +/* + */ +/* Offset from DTC_5380_OFFSET */ +#define DTC_CONTROL_REG 0x100 /* rw */ +#define D_CR_ACCESS 0x80 /* ro set=can access 3280 registers */ +#define CSR_DIR_READ 0x40 /* rw direction, 1 = read 0 = write */ + +#define CSR_RESET 0x80 /* wo Resets 53c400 */ +#define CSR_5380_REG 0x80 /* ro 5380 registers can be accessed */ +#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */ +#define CSR_SCSI_BUFF_INTR 0x20 /* rw Enable int on transfer ready */ +#define CSR_5380_INTR 0x10 /* rw Enable 5380 interrupts */ +#define CSR_SHARED_INTR 0x08 /* rw Interrupt sharing */ +#define CSR_HOST_BUF_NOT_RDY 0x04 /* ro Host buffer not ready */ +#define CSR_SCSI_BUF_RDY 0x02 /* ro SCSI buffer ready */ +#define CSR_GATED_5380_IRQ 0x01 /* ro Last block xferred */ +#define CSR_INT_BASE (CSR_SCSI_BUFF_INTR | CSR_5380_INTR) + + +#define DTC_BLK_CNT 0x101 /* rw + * # of 128-byte blocks to transfer */ + + +#define D_CR_ACCESS 0x80 /* ro set=can access 3280 registers */ + +#define DTC_SWITCH_REG 0x3982 /* ro - DIP switches */ +#define DTC_RESUME_XFER 0x3982 /* wo - resume data xfer + * after disconnect/reconnect*/ + +#define DTC_5380_OFFSET 0x3880 /* 8 registers here, see NCR5380.h */ + +/*!!!! for dtc, it's a 128 byte buffer at 3900 !!! */ +#define DTC_DATA_BUF 0x3900 /* rw 128 bytes long */ + + +#ifndef ASM +int dtc_abort(Scsi_Cmnd *); +int dtc_biosparam(Disk *, kdev_t, int*); +int dtc_detect(Scsi_Host_Template *); +int dtc_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); +int dtc_reset(Scsi_Cmnd *, unsigned int reset_flags); +int dtc_proc_info (char *buffer, char **start, off_t offset, + int length, int hostno, int inout); + +#ifndef NULL +#define NULL 0 +#endif + +#ifndef CMD_PER_LUN +#define CMD_PER_LUN 2 +#endif + +#ifndef CAN_QUEUE +#define CAN_QUEUE 32 +#endif + +/* + * I hadn't thought of this with the earlier drivers - but to prevent + * macro definition conflicts, we shouldn't define all of the internal + * macros when this is being used solely for the host stub. + */ + +#if defined(HOSTS_C) || defined(MODULE) + +#define DTC3x80 {NULL, NULL, NULL, NULL, \ + "DTC 3180/3280 ", dtc_detect, NULL, \ + NULL, \ + NULL, dtc_queue_command, dtc_abort, dtc_reset, NULL, \ + dtc_biosparam, \ + /* can queue */ CAN_QUEUE, /* id */ 7, SG_ALL, \ + /* cmd per lun */ CMD_PER_LUN , 0, 0, DISABLE_CLUSTERING} + +#endif + +#ifndef HOSTS_C + +#define NCR5380_implementation_fields \ + volatile unsigned char *base + +#define NCR5380_local_declare() \ + volatile unsigned char *base + +#define NCR5380_setup(instance) \ + base = (volatile unsigned char *) (instance)->base + +#define DTC_address(reg) (base + DTC_5380_OFFSET + reg) + +#define dbNCR5380_read(reg) \ + (rval=*(DTC_address(reg)), \ + (((unsigned char) printk("DTC : read register %d at addr %08x is: %02x\n"\ + , (reg), (int)DTC_address(reg), rval)), rval ) ) + +#define dbNCR5380_write(reg, value) do { \ + printk("DTC : write %02x to register %d at address %08x\n", \ + (value), (reg), (int)DTC_address(reg)); \ + *(DTC_address(reg)) = (value);} while(0) + + +#if !(DTCDEBUG & DTCDEBUG_TRANSFER) +#define NCR5380_read(reg) (*(DTC_address(reg))) +#define NCR5380_write(reg, value) (*(DTC_address(reg)) = (value)) +#else +#define NCR5380_read(reg) (*(DTC_address(reg))) +#define xNCR5380_read(reg) \ + (((unsigned char) printk("DTC : read register %d at address %08x\n"\ + , (reg), DTC_address(reg))), *(DTC_address(reg))) + +#define NCR5380_write(reg, value) do { \ + printk("DTC : write %02x to register %d at address %08x\n", \ + (value), (reg), (int)DTC_address(reg)); \ + *(DTC_address(reg)) = (value); } while(0) +#endif + +#define NCR5380_intr dtc_intr +#define NCR5380_queue_command dtc_queue_command +#define NCR5380_abort dtc_abort +#define NCR5380_reset dtc_reset +#define NCR5380_proc_info dtc_proc_info + +/* 15 12 11 10 + 1001 1100 0000 0000 */ + +#define DTC_IRQS 0x9c00 + + +#endif /* else def HOSTS_C */ +#endif /* ndef ASM */ +#endif /* DTC3280_H */ -- cgit v1.2.3