aboutsummaryrefslogtreecommitdiff
path: root/modules/pam_mkhomedir
Commit message (Collapse)AuthorAgeFilesLines
* HALF WORK: MAX_PATHdebianYuqian Yang2025-03-012-41/+14
|
* build: drop autotools supportDmitry V. Levin2024-10-232-50/+0
| | | | There is no point in supporting two different build systems.
* meson: build Linux-PAM using mesonDmitry V. Levin2024-09-101-0/+1
| | | | | | | | | | On my non-representative hardware, the full build using autotools (./autogen.sh && CFLAGS=-O2 ./configure && make -j`nproc` && make -j`nproc` install) takes about 45 seconds. On the same hardware, the full build using meson (meson setup -Doptimization=2 dir && meson compile -C dir && meson install -C dir) takes just about 7.5 seconds.
* build: parametrize libtool subdirectoryDmitry V. Levin2024-08-221-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Unhardcode ".libs" subdirectory where libtool stores shared objects, as other build systems doesn't necessarily use it. * configure.ac (AC_DEFINE_UNQUOTED): Add LTDIR. * modules/pam_canonicalize_user/tst-pam_canonicalize_user-retval.c: Replace ".libs/" with LTDIR. * modules/pam_debug/tst-pam_debug-retval.c: Likewise. * modules/pam_deny/tst-pam_deny-retval.c: Likewise. * modules/pam_echo/tst-pam_echo-retval.c: Likewise. * modules/pam_env/tst-pam_env-retval.c: Likewise. * modules/pam_faildelay/tst-pam_faildelay-retval.c: Likewise. * modules/pam_faillock/tst-pam_faillock-retval.c: Likewise. * modules/pam_listfile/tst-pam_listfile-retval.c: Likewise. * modules/pam_localuser/tst-pam_localuser-retval.c: Likewise. * modules/pam_mkhomedir/tst-pam_mkhomedir-retval.c: Likewise. * modules/pam_nologin/tst-pam_nologin-retval.c: Likewise. * modules/pam_permit/tst-pam_permit-retval.c: Likewise. * modules/pam_pwhistory/tst-pam_pwhistory-retval.c: Likewise. * modules/pam_rootok/tst-pam_rootok-retval.c: Likewise. * modules/pam_sepermit/tst-pam_sepermit-retval.c: Likewise. * modules/pam_succeed_if/tst-pam_succeed_if-retval.c: Likewise. * modules/pam_time/tst-pam_time-retval.c: Likewise. * modules/pam_warn/tst-pam_warn-retval.c: Likewise.
* Include pam_i18n.h where i18n definitions are requiredDmitry V. Levin2024-08-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Do not include <libintl.h> and other i18n stuff via config.h which is included into every compilation unit, include "pam_i18n.h" explicitly where necessary. * configure.ac (AH_BOTTOM): Remove. * libpam/pam_get_authtok.c: Include "pam_i18n.h". * libpam/pam_item.c: Likewise. * libpam/pam_strerror.c: Likewise. * libpam_misc/misc_conv.c: Likewise. * modules/pam_exec/pam_exec.c: Likewise. * modules/pam_faillock/main.c: Likewise. * modules/pam_faillock/pam_faillock.c: Likewise. * modules/pam_lastlog/pam_lastlog.c: Likewise. * modules/pam_limits/pam_limits.c: Likewise. * modules/pam_mail/pam_mail.c: Likewise. * modules/pam_mkhomedir/pam_mkhomedir.c: Likewise. * modules/pam_pwhistory/pam_pwhistory.c: Likewise. * modules/pam_selinux/pam_selinux.c: Likewise. * modules/pam_selinux/pam_selinux_check.c: Likewise. * modules/pam_timestamp/pam_timestamp.c: Likewise. * modules/pam_unix/pam_unix_acct.c: Likewise. * modules/pam_unix/pam_unix_passwd.c: Likewise. * modules/pam_userdb/pam_userdb.c: Likewise.
* libpam_internal: supply debug functionalityTobias Stoeckmann2024-01-241-1/+2
| | | | | | | | | | Move function bodies from headers into dedicated object files stored in libpam_internal. This library won't be installed. Keep the debug function body in header, even though disabled when building Linux-PAM, to stay API compatible with previous versions. Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* modules: add pamc headers to the search path only when neededTobias Stoeckmann2024-01-211-1/+1
| | | | | | | | | The pam client library libpamc is only needed if libpam_misc is in use. But libpam_misc is only used by an SELinux helper binary. Remove the libpamc includes from the search path in all other cases. Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* treewide: strictly separate builddir and srcdirTobias Stoeckmann2024-01-121-1/+1
| | | | | | | | | | Building outside of source directory fails if --disable-doc is not explicitly chosen. This happens because generated files are sometimes expected in the source directory, where they won't exist. Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* pam_mkhomedir: avoid string copyingTobias Stoeckmann2023-12-191-6/+2
| | | | | | | The characters in skeldir are only assigned, not modified later on. Use a const char pointer instead which is easier to verify. Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* pam_mkhomedir: do not follow symbolic linksTobias Stoeckmann2023-11-291-36/+113
| | | | | | | | Make sure that we do not follow any symbolic links within the home directory of a user. If such a link exists, it must have been created by someone else. Never follow them and just fail. Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* pam_mkhomedir: enforce absolute home directoriesTobias Stoeckmann2023-11-291-0/+5
| | | | | | Encountering a relative home directory can only mean troubles. Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* pam_mkhomedir: improve error path handlingTobias Stoeckmann2023-11-291-204/+178
| | | | | | | | Extract logic reponsible for copying single directory entries into its own function for easier error handling, i.e. using goto for clean up of variables used in "for loop". Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* pam_mkhomedir: treat existing files as successTobias Stoeckmann2023-11-291-8/+13
| | | | | | | | The mkhomedir_helper treats an already existing home directory as success. Keep this logic within create_homedir to reduce the negative impact of concurrently running instances. Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* pam_mkhomedir: return error if link creation failsTobias Stoeckmann2023-11-291-12/+23
| | | | | | | Treat symlink creation failures the same way as failures when creating files and directories. Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* pam_mkhomedir: set home directory mode only onceTobias Stoeckmann2023-11-291-14/+7
| | | | | | | | | If HOME_MODE of login.conf is more restrictive than the default directory mode with umask, a short time window exists in which the home directory has a less restrictive mode than requested (between create_homedir and prelude of create_homedir_helper). Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* pam_mkhomedir: always call chown/chmod for dirTobias Stoeckmann2023-11-291-6/+12
| | | | | | | | In some error cases in create_homedir ownership and mode of the newly created directory are not set. Always do so to prevent root-owned directories as error leftovers. Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* pam_mkhomedir: ensure correct argument type when printing debug outputBenny Baumann2023-11-141-1/+1
| | | | | | | | While the underlying type for setting the user was correct, the additional output neglected to include the type cast necessary when actually printing the data. This is rectified here. Signed-off-by: Benny Baumann <BenBE@geshi.org>
* pam_mkhomedir: simplify handling of newsource/newdestPino Toscano2023-05-121-85/+32
| | | | | | | | | | | | | | | | | To support OSes without PATH_MAX (which is optional in POSIX), there are two code paths for the 'newsource' and 'newdest' variables: one using a PATH_MAX-sized stack buffer, and one using heap allocation. The second is even more complicated than needed, doing manual calculations and allocations. To simplify the code a bit more, easing its maintenance, unify the two using asprintf() to allocate 'newsource' and 'newdest': the extra allocation needed should not be an issue, since this code runs in a separate helper executable. As additional change for this simplification, remove the reset to the two variables to NULL right after their free(), which is not needed since their scopes end.
* modules: make use of secure memory erasureChristian Göttsche2023-02-281-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Use empty initialization of structs to minimize the memset() usage, to reduce the amount of calls which are not sensitive. Non trivial changes: - pam_env: * erase environment variables where possible - pam_exec: * erase responce on error * erase auth token - pam_pwhistory: * erase buffers containing old passwords - pam_selinux: skip overwriting data structure consisting of only pointers to insensitive data, which also gets free'd afterwards (so it currently does not protect against double-free or use-after-free on the member pointers) - pam_unix: erase cipher data in more places - pam_userdb: erase password hashes
* build: use <vendordir>/security directory for installation if it has been setStefan Schubert2023-02-071-0/+4
| | | | | | | | | Otherwise the corresponding files are still installed in /etc/security. * configure.ac (AC_SUBST): Add VENDOR_SCONFIGDIR. (AM_CONDITIONAL): Add HAVE_VENDORDIR. * modules/*/Makefile.am (secureconfdir): Set to VENDOR_SCONFIGDIR if HAVE_VENDORDIR has been set, otherwise to SCONFIGDIR.
* doc: Update PAM documentation from DockBook 4 to DocBook 5Stefan Schubert2022-12-163-63/+44
| | | | | | | | | | | | | | | | | | | | Changed files -------------- Make.xml.rules.in: - Using RNG file instead of DTD file for checking XML files. - Taking the correct stylesheet for README files. doc/sag/Makefile.am, doc/adg/Makefile.am, doc/mwg/Makefile.am: - Using RNG file instead of DTD file for checking XML files. configure.ac: - Adding a new option for selecting RNG check file (-enable-docbook-rng) - Switching stylesheets to docbook 5 - Checking DocBook 5 environment instead of DocBook 4 environment *.xml: Update from DockBook 4 to DocBook 5
* pam_mkhomedir: make sure the SIGCHLD handler is not reset too earlyDmitry V. Levin2022-07-161-9/+9
| | | | | | * modules/pam_mkhomedir/pam_mkhomedir.c (create_homedir): Make sure the SIGCHLD handler is not reset too early by moving the sigaction call right before the fork call.
* pam_mkhomedir: use HOME_MODE or UMASK from /etc/login.defsdshein-alt2021-03-054-9/+87
| | | | | | Follow the example of useradd(8) and set the user home directory mode to the value of HOME_MODE or UMASK configuration item from /etc/login.defs when umask option is not specified.
* pam_mkhomedir: fix umask wording in documentationDmitry V. Levin2020-12-231-1/+1
| | | | * modules/pam_mkhomedir/pam_mkhomedir.8.xml (umask): Fix wording.
* Fix various typos found using codespell toolDmitry V. Levin2020-11-241-1/+1
| | | | | | | | | | * modules/pam_limits/limits.conf: Replace "overriden" with "overridden". * modules/pam_mkhomedir/mkhomedir_helper.c (create_homedir): Replace "preseves" with "preserves". * modules/pam_setquota/pam_setquota.8.xml: Replace "specifed" with "specified". * modules/pam_setquota/pam_setquota.c (pam_sm_open_session): Replace "fileystem" with "filesystem", "conditons" with "conditions".
* modules: build all helpers with proper CFLAGS and LDFLAGSDmitry V. Levin2020-08-071-0/+2
| | | | | | | | | | | | This makes all installed executables built with @EXE_CFLAGS@ and @EXE_LDFLAGS@. * modules/pam_mkhomedir/Makefile.am (mkhomedir_helper_CFLAGS, mkhomedir_helper_LDFLAGS): New variables. * modules/pam_tally/Makefile.am (pam_tally_CFLAGS, pam_tally_LDFLAGS): Likewise. * modules/pam_tally2/Makefile.am (pam_tally2_CFLAGS, pam_tally2_LDFLAGS): Likewise.
* pam_namespace, pam_mkhomedir: fix unlikely descriptor leaks on error pathikerexxe2020-07-011-0/+2
| | | | | | | | | | | [ldv: rewrote commit message] * modules/pam_mkhomedir/mkhomedir_helper.c (create_homedir): Close just opened file descriptor "srcfd" in an unlikely case when it cannot be fstat'ed. * modules/pam_namespace/pam_namespace.c (create_instance): Close just opened file descriptor "fd" in an unlikely case when it cannot be fstat'ed.
* pam_mkhomedir: add a test for return valuesDmitry V. Levin2020-05-212-1/+114
| | | | | | * modules/pam_mkhomedir/tst-pam_mkhomedir-retval.c: New file. * modules/pam_mkhomedir/Makefile.am (TESTS): Add $(check_PROGRAMS). (check_PROGRAMS, tst_pam_mkhomedir_retval_LDADD): New variables.
* pam_mkhomedir: fix return value when the user is unknownDmitry V. Levin2020-05-093-10/+2
| | | | | | | | | | | | | From the very beginning pam_mkhomedir module used to return PAM_CRED_INSUFFICIENT when getpwnam() or pam_modutil_getpwnam() returned an error. Fix this now by changing the return value to PAM_USER_UNKNOWN. * modules/pam_mkhomedir/mkhomedir_helper.c (main): Return PAM_USER_UNKNOWN instead of PAM_CRED_INSUFFICIENT. * modules/pam_mkhomedir/pam_mkhomedir.c (pam_sm_open_session): Likewise. * modules/pam_mkhomedir/pam_mkhomedir.8.xml (PAM_CRED_INSUFFICIENT): Remove.
* modules: remove PAM_SM_* macrosDmitry V. Levin2020-05-031-9/+0
| | | | | | Starting with commit a684595c0bbd88df71285f43fb27630e3829121e aka Linux-PAM-1.3.0~14 (Remove "--enable-static-modules" option and support from Linux-PAM), PAM_SM_* macros have no effect.
* modules/*/Makefile.am: rename TESTS to dist_check_SCRIPTSDmitry V. Levin2020-05-031-2/+3
| | | | | | | | ... and remove $(TESTS) from EXTRA_DIST. The change is performed automatically using the following script: sed -i -e 's/^TESTS = \(tst.*\)/dist_check_SCRIPTS = \1\nTESTS = $(dist_check_SCRIPTS)/' \ -e '/^EXTRA_DIST/ s/ \$(TESTS)//' modules/*/Makefile.am
* modules/*/Makefile.am: rename man_MANS to dist_man_MANSDmitry V. Levin2020-05-031-2/+2
| | | | | | | ... and remove $(MANS) from EXTRA_DIST. The change is performed automatically using the following script: sed -i 's/^man_MANS/dist_&/; /^EXTRA_DIST/ s/ \$(MANS)//' modules/*/Makefile.am
* modules/*/Makefile.am: add dist_ prefix to *_DATADmitry V. Levin2020-05-031-2/+2
| | | | | | | ... and remove $(DATA) from EXTRA_DIST. The change is performed automatically using the following script: sed -i 's/^[a-z]*_DATA/dist_&/; /^EXTRA_DIST/ s/ \$(DATA)//' modules/*/Makefile.am
* modules/*/Makefile.am: replace README with $(DATA) in EXTRA_DISTDmitry V. Levin2020-04-271-1/+1
| | | | | | | | | | | | Since the GNU Automake distributes README files by default, the only reason why README had to be listed in EXTRA_DIST was to make these README files generated. Since README is also listed in noinst_DATA, we can safely replace README in EXTRA_DIST with $(DATA), this also opens the way for further EXTRA_DIST cleanup. * modules/*/Makefile.am (EXTRA_DIST): Replace README with $(DATA).
* modules/*/Makefile.am: reorder lines to promote uniformityDmitry V. Levin2020-04-271-2/+0
| | | | | This is essentially a no-op change that makes modules/*/Makefile.am files less divergent.
* build: move README prerequisites rule from modules/*/Makefile.am to ↵Dmitry V. Levin2020-04-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make.xml.rules As the rule is now the same in every modules/*/Makefile.am file, move it to Make.xml.rules. * Make.xml.rules (README): New prerequisites rule. * modules/pam_access/Makefile.am (README): Remove rule. * modules/pam_cracklib/Makefile.am (README): Likewise. * modules/pam_debug/Makefile.am (README): Likewise. * modules/pam_deny/Makefile.am (README): Likewise. * modules/pam_echo/Makefile.am (README): Likewise. * modules/pam_env/Makefile.am (README): Likewise. * modules/pam_exec/Makefile.am (README): Likewise. * modules/pam_faildelay/Makefile.am (README): Likewise. * modules/pam_filter/Makefile.am (README): Likewise. * modules/pam_ftp/Makefile.am (README): Likewise. * modules/pam_group/Makefile.am (README): Likewise. * modules/pam_issue/Makefile.am (README): Likewise. * modules/pam_keyinit/Makefile.am (README): Likewise. * modules/pam_lastlog/Makefile.am (README): Likewise. * modules/pam_limits/Makefile.am (README): Likewise. * modules/pam_listfile/Makefile.am (README): Likewise. * modules/pam_localuser/Makefile.am (README): Likewise. * modules/pam_loginuid/Makefile.am (README): Likewise. * modules/pam_mail/Makefile.am (README): Likewise. * modules/pam_mkhomedir/Makefile.am (README): Likewise. * modules/pam_motd/Makefile.am (README): Likewise. * modules/pam_namespace/Makefile.am (README): Likewise. * modules/pam_nologin/Makefile.am (README): Likewise. * modules/pam_permit/Makefile.am (README): Likewise. * modules/pam_pwhistory/Makefile.am (README): Likewise. * modules/pam_rhosts/Makefile.am (README): Likewise. * modules/pam_rootok/Makefile.am (README): Likewise. * modules/pam_securetty/Makefile.am (README): Likewise. * modules/pam_selinux/Makefile.am (README): Likewise. * modules/pam_sepermit/Makefile.am (README): Likewise. * modules/pam_setquota/Makefile.am (README): Likewise. * modules/pam_shells/Makefile.am (README): Likewise. * modules/pam_succeed_if/Makefile.am (README): Likewise. * modules/pam_tally/Makefile.am (README): Likewise. * modules/pam_tally2/Makefile.am (README): Likewise. * modules/pam_time/Makefile.am (README): Likewise. * modules/pam_timestamp/Makefile.am (README): Likewise. * modules/pam_tty_audit/Makefile.am (README): Likewise. * modules/pam_umask/Makefile.am (README): Likewise. * modules/pam_unix/Makefile.am (README): Likewise. * modules/pam_userdb/Makefile.am (README): Likewise. * modules/pam_usertype/Makefile.am (README): Likewise. * modules/pam_warn/Makefile.am (README): Likewise. * modules/pam_wheel/Makefile.am (README): Likewise. * modules/pam_xauth/Makefile.am (README): Likewise.
* modules/*/Makefile.am: list prerequisites of README target uniformlyDmitry V. Levin2020-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to list prerequisites of README targets manually as all README targets depend on $(XMLS). The change is performed automatically using the following script: sed -i 's/^README: pam_.*/README: $(XMLS)/' modules/*/Makefile.am * modules/pam_access/Makefile.am (README): Replace pam_access.8.xml and access.conf.5.xml with $(XMLS). * modules/pam_cracklib/Makefile.am (README): Replace pam_cracklib.8.xml with $(XMLS). * modules/pam_debug/Makefile.am (README): Replace pam_debug.8.xml with $(XMLS). * modules/pam_deny/Makefile.am (README): Replace pam_deny.8.xml with $(XMLS). * modules/pam_echo/Makefile.am (README): Replace pam_echo.8.xml with $(XMLS). * modules/pam_env/Makefile.am (README): Replace pam_env.8.xml and pam_env.conf.5.xml with $(XMLS). * modules/pam_exec/Makefile.am (README): Replace pam_exec.8.xml with $(XMLS). * modules/pam_faildelay/Makefile.am (README): Replace pam_faildelay.8.xml with $(XMLS). * modules/pam_filter/Makefile.am (README): Replace pam_filter.8.xml with $(XMLS). * modules/pam_ftp/Makefile.am (README): Replace pam_ftp.8.xml with $(XMLS). * modules/pam_group/Makefile.am (README): Replace pam_group.8.xml and group.conf.5.xml with $(XMLS). * modules/pam_issue/Makefile.am (README): Replace pam_issue.8.xml with $(XMLS). * modules/pam_keyinit/Makefile.am (README): Replace pam_keyinit.8.xml with $(XMLS). * modules/pam_lastlog/Makefile.am (README): Replace pam_lastlog.8.xml with $(XMLS). * modules/pam_limits/Makefile.am (README): Replace pam_limits.8.xml and limits.conf.5.xml with $(XMLS). * modules/pam_listfile/Makefile.am (README): Replace pam_listfile.8.xml with $(XMLS). * modules/pam_localuser/Makefile.am (README): Replace pam_localuser.8.xml with $(XMLS). * modules/pam_loginuid/Makefile.am (README): Replace pam_loginuid.8.xml with $(XMLS). * modules/pam_mail/Makefile.am (README): Replace pam_mail.8.xml with $(XMLS). * modules/pam_mkhomedir/Makefile.am (README): Replace pam_mkhomedir.8.xml with $(XMLS). * modules/pam_motd/Makefile.am (README): Replace pam_motd.8.xml with $(XMLS). * modules/pam_namespace/Makefile.am (README): Replace pam_namespace.8.xml, namespace.conf.5.xml, and pam_namespace_helper.8.xml with $(XMLS). * modules/pam_nologin/Makefile.am (README): Replace pam_nologin.8.xml with $(XMLS). * modules/pam_permit/Makefile.am (README): Replace pam_permit.8.xml with $(XMLS). * modules/pam_pwhistory/Makefile.am (README): Replace pam_pwhistory.8.xml with $(XMLS). * modules/pam_rhosts/Makefile.am (README): Replace pam_rhosts.8.xml with $(XMLS). * modules/pam_rootok/Makefile.am (README): Replace pam_rootok.8.xml with $(XMLS). * modules/pam_securetty/Makefile.am (README): Replace pam_securetty.8.xml with $(XMLS). * modules/pam_selinux/Makefile.am (README): Replace pam_selinux.8.xml with $(XMLS). * modules/pam_sepermit/Makefile.am (README): Replace pam_sepermit.8.xml with $(XMLS). * modules/pam_setquota/Makefile.am (README): Replace pam_setquota.8.xml with $(XMLS). * modules/pam_shells/Makefile.am (README): Replace pam_shells.8.xml with $(XMLS). * modules/pam_succeed_if/Makefile.am (README): Replace pam_succeed_if.8.xml with $(XMLS). * modules/pam_tally/Makefile.am (README): Replace pam_tally.8.xml with $(XMLS). * modules/pam_tally2/Makefile.am (README): Replace pam_tally2.8.xml with $(XMLS). * modules/pam_time/Makefile.am (README): Replace pam_time.8.xml and time.conf.5.xml with $(XMLS). * modules/pam_timestamp/Makefile.am (README): Replace pam_timestamp.8.xml with $(XMLS). * modules/pam_tty_audit/Makefile.am (README): Replace pam_tty_audit.8.xml with $(XMLS). * modules/pam_umask/Makefile.am (README): Replace pam_umask.8.xml with $(XMLS). * modules/pam_unix/Makefile.am (README): Replace pam_unix.8.xml with $(XMLS). * modules/pam_userdb/Makefile.am (README): Replace pam_userdb.8.xml with $(XMLS). * modules/pam_usertype/Makefile.am (README): Replace pam_usertype.8.xml with $(XMLS). * modules/pam_warn/Makefile.am (README): Replace pam_warn.8.xml with $(XMLS). * modules/pam_wheel/Makefile.am (README): Replace pam_wheel.8.xml with $(XMLS). * modules/pam_xauth/Makefile.am (README): Replace pam_xauth.8.xml with $(XMLS).
* modules/*/Makefile.am: list tests in EXTRA_DIST uniformlyDmitry V. Levin2020-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The change was prepared using the following script: git grep -l '^TESTS = tst-pam_' modules/ |while read m; do t="$(sed '/^TESTS = tst-pam_/!d;s/^TESTS = //;q' -- "$m")" sed -i "/^EXTRA_DIST =/ s/$t\\>/\$(TESTS)/" -- "$m" done * modules/pam_access/Makefile.am (EXTRA_DIST): Replace tst-pam_access with $(TESTS). * modules/pam_cracklib/Makefile.am (EXTRA_DIST): Replace tst-pam_cracklib with $(TESTS). * modules/pam_debug/Makefile.am (EXTRA_DIST): Replace tst-pam_debug with $(TESTS). * modules/pam_deny/Makefile.am (EXTRA_DIST): Replace tst-pam_deny with $(TESTS). * modules/pam_echo/Makefile.am (EXTRA_DIST): Replace tst-pam_echo with $(TESTS). * modules/pam_env/Makefile.am (EXTRA_DIST): Replace tst-pam_env with $(TESTS). * modules/pam_exec/Makefile.am (EXTRA_DIST): Replace tst-pam_exec with $(TESTS). * modules/pam_faildelay/Makefile.am (EXTRA_DIST): Replace tst-pam_faildelay with $(TESTS). * modules/pam_filter/Makefile.am (EXTRA_DIST): Replace tst-pam_filter with $(TESTS). * modules/pam_ftp/Makefile.am (EXTRA_DIST): Replace tst-pam_ftp with $(TESTS). * modules/pam_group/Makefile.am (EXTRA_DIST): Replace tst-pam_group with $(TESTS). * modules/pam_issue/Makefile.am (EXTRA_DIST): Replace tst-pam_issue with $(TESTS). * modules/pam_keyinit/Makefile.am (EXTRA_DIST): Replace tst-pam_keyinit with $(TESTS). * modules/pam_lastlog/Makefile.am (EXTRA_DIST): Replace tst-pam_lastlog with $(TESTS). * modules/pam_limits/Makefile.am (EXTRA_DIST): Replace tst-pam_limits with $(TESTS). * modules/pam_listfile/Makefile.am (EXTRA_DIST): Replace tst-pam_listfile with $(TESTS). * modules/pam_localuser/Makefile.am (EXTRA_DIST): Replace tst-pam_localuser with $(TESTS). * modules/pam_loginuid/Makefile.am (EXTRA_DIST): Replace tst-pam_loginuid with $(TESTS). * modules/pam_mail/Makefile.am (EXTRA_DIST): Replace tst-pam_mail with $(TESTS). * modules/pam_mkhomedir/Makefile.am (EXTRA_DIST): Replace tst-pam_mkhomedir with $(TESTS). * modules/pam_motd/Makefile.am (EXTRA_DIST): Replace tst-pam_motd with $(TESTS). * modules/pam_namespace/Makefile.am (EXTRA_DIST): Replace tst-pam_namespace with $(TESTS). * modules/pam_nologin/Makefile.am (EXTRA_DIST): Replace tst-pam_nologin with $(TESTS). * modules/pam_permit/Makefile.am (EXTRA_DIST): Replace tst-pam_permit with $(TESTS). * modules/pam_pwhistory/Makefile.am (EXTRA_DIST): Replace tst-pam_pwhistory with $(TESTS). * modules/pam_rhosts/Makefile.am (EXTRA_DIST): Replace tst-pam_rhosts with $(TESTS). * modules/pam_rootok/Makefile.am (EXTRA_DIST): Replace tst-pam_rootok with $(TESTS). * modules/pam_securetty/Makefile.am (EXTRA_DIST): Replace tst-pam_securetty with $(TESTS). * modules/pam_sepermit/Makefile.am (EXTRA_DIST): Replace tst-pam_sepermit with $(TESTS). * modules/pam_setquota/Makefile.am (EXTRA_DIST): Replace tst-pam_setquota with $(TESTS). * modules/pam_shells/Makefile.am (EXTRA_DIST): Replace tst-pam_shells with $(TESTS). * modules/pam_stress/Makefile.am (EXTRA_DIST): Replace tst-pam_stress with $(TESTS). * modules/pam_succeed_if/Makefile.am (EXTRA_DIST): Replace tst-pam_succeed_if with $(TESTS). * modules/pam_tally/Makefile.am (EXTRA_DIST): Replace tst-pam_tally with $(TESTS). * modules/pam_tally2/Makefile.am (EXTRA_DIST): Replace tst-pam_tally2 with $(TESTS). * modules/pam_time/Makefile.am (EXTRA_DIST): Replace tst-pam_time with $(TESTS). * modules/pam_tty_audit/Makefile.am (EXTRA_DIST): Replace tst-pam_tty_audit with $(TESTS). * modules/pam_umask/Makefile.am (EXTRA_DIST): Replace tst-pam_umask with $(TESTS). * modules/pam_userdb/Makefile.am (EXTRA_DIST): Replace tst-pam_userdb with $(TESTS). * modules/pam_usertype/Makefile.am (EXTRA_DIST): Replace tst-pam_usertype with $(TESTS). * modules/pam_warn/Makefile.am (EXTRA_DIST): Replace tst-pam_warn with $(TESTS). * modules/pam_wheel/Makefile.am (EXTRA_DIST): Replace tst-pam_wheel with $(TESTS). * modules/pam_xauth/Makefile.am (EXTRA_DIST): Replace tst-pam_xauth with $(TESTS).
* Fix various typos found using codespell toolDmitry V. Levin2020-03-281-1/+1
|
* modules/pam_mkhomedir: use pam_str_skip_prefixDmitry V. Levin2020-03-191-4/+7
| | | | | | * modules/pam_mkhomedir/pam_mkhomedir.c: Include "pam_inline.h". (_pam_parse): Use pam_str_skip_prefix instead of ugly strncmp invocations.
* configure.ac: add --enable-doc optionFabrice Fontaine2020-01-271-0/+2
| | | | | | | | Allow the user to disable documentation through --disable-doc (enabled by default), this is especially useful when cross-compiling for embedded targets Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
* Fix remaining -Wcast-qual compilation warningsDmitry V. Levin2020-01-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a new internal header file with definitions of DIAG_PUSH_IGNORE_CAST_QUAL and DIAG_POP_IGNORE_CAST_QUAL macros, use them to temporary silence -Wcast-qual compilation warnings in various modules. * libpam/include/pam_cc_compat.h: New file. * libpam/Makefile.am (noinst_HEADERS): Add include/pam_cc_compat.h. * modules/pam_mkhomedir/pam_mkhomedir.c: Include "pam_cc_compat.h". (create_homedir): Wrap execve invocation in DIAG_PUSH_IGNORE_CAST_QUAL and DIAG_POP_IGNORE_CAST_QUAL. * modules/pam_namespace/pam_namespace.c: Include "pam_cc_compat.h". (pam_sm_close_session): Wrap the cast that discards ‘const’ qualifier in DIAG_PUSH_IGNORE_CAST_QUAL and DIAG_POP_IGNORE_CAST_QUAL. * modules/pam_tty_audit/pam_tty_audit.c: Include "pam_cc_compat.h". (nl_send): Wrap the cast that discards ‘const’ qualifier in DIAG_PUSH_IGNORE_CAST_QUAL and DIAG_POP_IGNORE_CAST_QUAL. * modules/pam_unix/pam_unix_acct.c: Include "pam_cc_compat.h". (_unix_run_verify_binary): Wrap execve invocation in DIAG_PUSH_IGNORE_CAST_QUAL and DIAG_POP_IGNORE_CAST_QUAL. * modules/pam_unix/pam_unix_passwd.c: Include "pam_cc_compat.h". (_unix_run_update_binary): Wrap execve invocation in DIAG_PUSH_IGNORE_CAST_QUAL and DIAG_POP_IGNORE_CAST_QUAL. * modules/pam_unix/passverify.c: Include "pam_cc_compat.h". (unix_update_shadow): Wrap the cast that discards ‘const’ qualifier in DIAG_PUSH_IGNORE_CAST_QUAL and DIAG_POP_IGNORE_CAST_QUAL. * modules/pam_unix/support.c: Include "pam_cc_compat.h". (_unix_run_helper_binary): Wrap execve invocation in DIAG_PUSH_IGNORE_CAST_QUAL and DIAG_POP_IGNORE_CAST_QUAL. * modules/pam_xauth/pam_xauth.c: Include "pam_cc_compat.h". (run_coprocess): Wrap execv invocation in DIAG_PUSH_IGNORE_CAST_QUAL and DIAG_POP_IGNORE_CAST_QUAL.
* Fix miscellaneous const issuesTomas Mraz2020-01-201-1/+1
| | | | | | | | | | * libpam/pam_modutil_searchkey.c: Avoid assigning empty string literal to non-const char *. * modules/pam_filter/pam_filter.c: Avoid using const char **. * modules/pam_mkhomedir/pam_mkhomedir.c: Properly cast out const for execve(). * modules/pam_namespace/pam_namespace.c: Properly cast out const from pam data. * modules/pam_tally2/pam_tally2.c: String literal must be assigned to const char *.
* Do not use CFLAGS for warning flags set from configureTomas Mraz2019-12-181-1/+1
| | | | | | | | To be able to set CFLAGS from make command-line but not to lose the warning flags. * configure.ac: Put warning flags to WARN_CFLAGS instead of CFLAGS. * */Makefile.am: Apply WARN_CFLAGS to AM_CFLAGS.
* pam_mkhomedir: Add debug option to pam_mkhomedir(8) man pageMIZUTA Takeshi2019-10-031-0/+17
|
* pam_mkhomedir: Allow creating parent of homedir under /Tomas Mraz2017-11-101-7/+9
| | | | | * modules/pam_mkhomedir/mkhomedir_helper.c (make_parent_dirs): Do not skip creating the directory if we are under /.
* Fix whitespace issuesDmitry V. Levin2016-04-011-1/+0
| | | | | | | | | | | | | | | | Remove blank lines at EOF introduced by commit a684595c0bbd88df71285f43fb27630e3829121e, making the project free of warnings reported by git diff --check 4b825dc642cb6eb9a060e54bf8d69288fbee4904 HEAD * libpam/pam_dynamic.c: Remove blank line at EOF. * modules/pam_echo/pam_echo.c: Likewise. * modules/pam_keyinit/pam_keyinit.c: Likewise. * modules/pam_mkhomedir/pam_mkhomedir.c: Likewise. * modules/pam_pwhistory/pam_pwhistory.c: Likewise. * modules/pam_rhosts/pam_rhosts.c: Likewise. * modules/pam_sepermit/pam_sepermit.c: Likewise. * modules/pam_stress/pam_stress.c: Likewise.
* Remove "--enable-static-modules" option and support fromThorsten Kukuk2016-03-291-17/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux-PAM. It was never official supported and was broken since years. * configure.ac: Remove --enable-static-modules option. * doc/man/pam_sm_acct_mgmt.3.xml: Remove PAM_EXTERN. * doc/man/pam_sm_authenticate.3.xml: Likewise. * doc/man/pam_sm_chauthtok.3.xml: Likewise. * doc/man/pam_sm_close_session.3.xml: Likewise. * doc/man/pam_sm_open_session.3.xml: Likewise. * doc/man/pam_sm_setcred.3.xml: Likewise. * libpam/Makefile.am: Remove STATIC_MODULES cases. * libpam/include/security/pam_modules.h: Remove PAM_STATIC parts. * libpam/pam_dynamic.c: Likewise. * libpam/pam_handlers.c: Likewise. * libpam/pam_private.h: Likewise. * libpam/pam_static.c: Remove file. * libpam/pam_static_modules.h: Remove header file. * modules/pam_access/pam_access.c: Remove PAM_EXTERN and PAM_STATIC parts. * modules/pam_cracklib/pam_cracklib.c: Likewise. * modules/pam_debug/pam_debug.c: Likewise. * modules/pam_deny/pam_deny.c: Likewise. * modules/pam_echo/pam_echo.c: Likewise. * modules/pam_env/pam_env.c: Likewise. * modules/pam_exec/pam_exec.c: Likewise. * modules/pam_faildelay/pam_faildelay.c: Likewise. * modules/pam_filter/pam_filter.c: Likewise. * modules/pam_ftp/pam_ftp.c: Likewise. * modules/pam_group/pam_group.c: Likewise. * modules/pam_issue/pam_issue.c: Likewise. * modules/pam_keyinit/pam_keyinit.c: Likewise. * modules/pam_lastlog/pam_lastlog.c: Likewise. * modules/pam_limits/pam_limits.c: Likewise. * modules/pam_listfile/pam_listfile.c: Likewise. * modules/pam_localuser/pam_localuser.c: Likewise. * modules/pam_loginuid/pam_loginuid.c: Likewise. * modules/pam_mail/pam_mail.c: Likewise. * modules/pam_mkhomedir/pam_mkhomedir.c: Likewise. * modules/pam_motd/pam_motd.c: Likewise. * modules/pam_namespace/pam_namespace.c: Likewise. * modules/pam_nologin/pam_nologin.c: Likewise. * modules/pam_permit/pam_permit.c: Likewise. * modules/pam_pwhistory/pam_pwhistory.c: Likewise. * modules/pam_rhosts/pam_rhosts.c: Likewise. * modules/pam_rootok/pam_rootok.c: Likewise. * modules/pam_securetty/pam_securetty.c: Likewise. * modules/pam_selinux/pam_selinux.c: Likewise. * modules/pam_sepermit/pam_sepermit.c: Likewise. * modules/pam_shells/pam_shells.c: Likewise. * modules/pam_stress/pam_stress.c: Likewise. * modules/pam_succeed_if/pam_succeed_if.c: Likewise. * modules/pam_tally/pam_tally.c: Likewise. * modules/pam_tally2/pam_tally2.c: Likewise. * modules/pam_time/pam_time.c: Likewise. * modules/pam_timestamp/pam_timestamp.c: Likewise. * modules/pam_tty_audit/pam_tty_audit.c: Likewise. * modules/pam_umask/pam_umask.c: Likewise. * modules/pam_userdb/pam_userdb.c: Likewise. * modules/pam_warn/pam_warn.c: Likewise. * modules/pam_wheel/pam_wheel.c: Likewise. * modules/pam_xauth/pam_xauth.c: Likewise. * modules/pam_unix/Makefile.am: Remove STATIC_MODULES part. * modules/pam_unix/pam_unix_acct.c: Remove PAM_STATIC part. * modules/pam_unix/pam_unix_auth.c: Likewise. * modules/pam_unix/pam_unix_passwd.c: Likewise. * modules/pam_unix/pam_unix_sess.c: Likewise. * modules/pam_unix/pam_unix_static.c: Removed. * modules/pam_unix/pam_unix_static.h: Removed. * po/POTFILES.in: Remove removed files. * tests/tst-dlopen.c: Remove PAM_STATIC part.
* pam_mkhomedir: Drop superfluous stat() call.Tomas Mraz2014-08-261-15/+1
| | | | | modules/pam_mkhomedir/mkhomedir_helper.c (create_homedir): Drop superfluous stat() call.
* Introduce pam_modutil_sanitize_helper_fdsDmitry V. Levin2014-01-271-11/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change introduces pam_modutil_sanitize_helper_fds - a new function that redirects standard descriptors and closes all other descriptors. pam_modutil_sanitize_helper_fds supports three types of input and output redirection: - PAM_MODUTIL_IGNORE_FD: do not redirect at all. - PAM_MODUTIL_PIPE_FD: redirect to a pipe. For stdin, it is implemented by creating a pipe, closing its write end, and redirecting stdin to its read end. Likewise, for stdout/stderr it is implemented by creating a pipe, closing its read end, and redirecting to its write end. Unlike stdin redirection, stdout/stderr redirection to a pipe has a side effect that a process writing to such descriptor should be prepared to handle SIGPIPE appropriately. - PAM_MODUTIL_NULL_FD: redirect to /dev/null. For stdin, it is implemented via PAM_MODUTIL_PIPE_FD because there is no functional difference. For stdout/stderr, it is classic redirection to /dev/null. PAM_MODUTIL_PIPE_FD is usually more suitable due to linux kernel security restrictions, but when the helper process might be writing to the corresponding descriptor and termination of the helper process by SIGPIPE is not desirable, one should choose PAM_MODUTIL_NULL_FD. * libpam/pam_modutil_sanitize.c: New file. * libpam/Makefile.am (libpam_la_SOURCES): Add it. * libpam/include/security/pam_modutil.h (pam_modutil_redirect_fd, pam_modutil_sanitize_helper_fds): New declarations. * libpam/libpam.map (LIBPAM_MODUTIL_1.1.9): New interface. * modules/pam_exec/pam_exec.c (call_exec): Use pam_modutil_sanitize_helper_fds. * modules/pam_mkhomedir/pam_mkhomedir.c (create_homedir): Likewise. * modules/pam_unix/pam_unix_acct.c (_unix_run_verify_binary): Likewise. * modules/pam_unix/pam_unix_passwd.c (_unix_run_update_binary): Likewise. * modules/pam_unix/support.c (_unix_run_helper_binary): Likewise. * modules/pam_xauth/pam_xauth.c (run_coprocess): Likewise. * modules/pam_unix/support.h (MAX_FD_NO): Remove.
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-08 19:04:26 +0000