aboutsummaryrefslogtreecommitdiff
path: root/modules/pam_setquota
Commit message (Collapse)AuthorAgeFilesLines
* build: drop autotools supportDmitry V. Levin2024-10-231-32/+0
| | | | There is no point in supporting two different build systems.
* meson: build Linux-PAM using mesonDmitry V. Levin2024-09-101-0/+1
| | | | | | | | | | On my non-representative hardware, the full build using autotools (./autogen.sh && CFLAGS=-O2 ./configure && make -j`nproc` && make -j`nproc` install) takes about 45 seconds. On the same hardware, the full build using meson (meson setup -Doptimization=2 dir && meson compile -C dir && meson install -C dir) takes just about 7.5 seconds.
* build: consistently include config.h firstDmitry V. Levin2024-08-301-1/+2
| | | | Make sure that config.h is included before any system header.
* modules: add pamc headers to the search path only when neededTobias Stoeckmann2024-01-211-2/+1
| | | | | | | | | The pam client library libpamc is only needed if libpam_misc is in use. But libpam_misc is only used by an SELinux helper binary. Remove the libpamc includes from the search path in all other cases. Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* treewide: strictly separate builddir and srcdirTobias Stoeckmann2024-01-121-1/+1
| | | | | | | | | | Building outside of source directory fails if --disable-doc is not explicitly chosen. This happens because generated files are sometimes expected in the source directory, where they won't exist. Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* pam_setquota: plug memory leakTobias Stoeckmann2023-12-051-0/+1
| | | | | | The result of pam_modutil_search_key must be freed. Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
* build: use <vendordir>/security directory for installation if it has been setStefan Schubert2023-02-071-0/+4
| | | | | | | | | Otherwise the corresponding files are still installed in /etc/security. * configure.ac (AC_SUBST): Add VENDOR_SCONFIGDIR. (AM_CONDITIONAL): Add HAVE_VENDORDIR. * modules/*/Makefile.am (secureconfdir): Set to VENDOR_SCONFIGDIR if HAVE_VENDORDIR has been set, otherwise to SCONFIGDIR.
* doc: Update PAM documentation from DockBook 4 to DocBook 5Stefan Schubert2022-12-162-56/+40
| | | | | | | | | | | | | | | | | | | | Changed files -------------- Make.xml.rules.in: - Using RNG file instead of DTD file for checking XML files. - Taking the correct stylesheet for README files. doc/sag/Makefile.am, doc/adg/Makefile.am, doc/mwg/Makefile.am: - Using RNG file instead of DTD file for checking XML files. configure.ac: - Adding a new option for selecting RNG check file (-enable-docbook-rng) - Switching stylesheets to docbook 5 - Checking DocBook 5 environment instead of DocBook 4 environment *.xml: Update from DockBook 4 to DocBook 5
* pam_setquota: Minor whitespace, spelling and mail address fixesSven Hartge2020-12-281-4/+4
|
* Fix various typos found using codespell toolDmitry V. Levin2020-11-242-3/+3
| | | | | | | | | | * modules/pam_limits/limits.conf: Replace "overriden" with "overridden". * modules/pam_mkhomedir/mkhomedir_helper.c (create_homedir): Replace "preseves" with "preserves". * modules/pam_setquota/pam_setquota.8.xml: Replace "specifed" with "specified". * modules/pam_setquota/pam_setquota.c (pam_sm_open_session): Replace "fileystem" with "filesystem", "conditons" with "conditions".
* pam_setquota: skip mountpoints equal to the user's $HOMEJosef Möllers2020-05-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Matthias Gerstner found the following issue: <quote> So this pam_setquota module iterates over all mounted file systems using `setmntent()` and `getmntent()`. It tries to find the longest match of a file system mounted on /home/$USER or above (except when the fs=/some/path parameter is passed to the pam module). The thing is that /home/$USER is owned by the unprivileged user. And there exist tools like fusermount from libfuse which is by default installed setuid-root for everybody. fusermount allows to mount a FUSE file system using an arbitrary "source device name" as the unprivileged user. Thus considering the following use case: 1) there is only the root file system (/) or a file system is mounted on /home, but not on /home/$USER. 2) the attacker mounts a fake FUSE file system over its own home directory: ``` user $ export _FUSE_COMMFD=0 user $ fusermount $HOME -ononempty,fsname=/dev/sda1 ``` This will result in a mount entry in /proc/mounts looking like this: ``` /dev/sda1 on /home/$USER type fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=100) ``` 3) when the attacker now logs in with pam_setquota configured then pam_setquota will identify /dev/sda1 and the file system where to apply the user's quota on. As a result an unprivileged user has full control over onto which block device the quota is applied. </quote> If the user's $HOME is on a separate partition, setting a quota on the user's $HOME does not really make sense, so this patch skips mountpoints equal to the user's $HOME, preventing the above mentioned bug as a side-effect (or vice-versa). Reported-by: Matthias Gerstner <mgerstner@suse.de> Co-authored-by: Tomáš Mráz <tmraz@redhat.com> Co-authored-by: Dmitry V. Levin <ldv@altlinux.org> Resolves: https://github.com/linux-pam/linux-pam/pull/230
* pam_setquota: fix return value when the user is unknownDmitry V. Levin2020-05-092-2/+3
| | | | | | | | | | | | Following the bad example in pam_mkhomedir module, from the very beginning pam_setquota module used to return PAM_CRED_INSUFFICIENT when pam_modutil_getpwnam() returned an error. Fix this now by changing the return value to PAM_USER_UNKNOWN. * modules/pam_setquota/pam_setquota.c (pam_sm_open_session): Return PAM_USER_UNKNOWN instead of PAM_CRED_INSUFFICIENT. * modules/pam_setquota/pam_setquota.8.xml (PAM_CRED_INSUFFICIENT): Replace with PAM_USER_UNKNOWN.
* modules: remove PAM_SM_* macrosDmitry V. Levin2020-05-031-3/+0
| | | | | | Starting with commit a684595c0bbd88df71285f43fb27630e3829121e aka Linux-PAM-1.3.0~14 (Remove "--enable-static-modules" option and support from Linux-PAM), PAM_SM_* macros have no effect.
* modules/*/Makefile.am: rename TESTS to dist_check_SCRIPTSDmitry V. Levin2020-05-031-2/+3
| | | | | | | | ... and remove $(TESTS) from EXTRA_DIST. The change is performed automatically using the following script: sed -i -e 's/^TESTS = \(tst.*\)/dist_check_SCRIPTS = \1\nTESTS = $(dist_check_SCRIPTS)/' \ -e '/^EXTRA_DIST/ s/ \$(TESTS)//' modules/*/Makefile.am
* modules/*/Makefile.am: rename man_MANS to dist_man_MANSDmitry V. Levin2020-05-031-2/+2
| | | | | | | ... and remove $(MANS) from EXTRA_DIST. The change is performed automatically using the following script: sed -i 's/^man_MANS/dist_&/; /^EXTRA_DIST/ s/ \$(MANS)//' modules/*/Makefile.am
* modules/*/Makefile.am: add dist_ prefix to *_DATADmitry V. Levin2020-05-031-2/+2
| | | | | | | ... and remove $(DATA) from EXTRA_DIST. The change is performed automatically using the following script: sed -i 's/^[a-z]*_DATA/dist_&/; /^EXTRA_DIST/ s/ \$(DATA)//' modules/*/Makefile.am
* modules/*/Makefile.am: replace README with $(DATA) in EXTRA_DISTDmitry V. Levin2020-04-271-1/+1
| | | | | | | | | | | | Since the GNU Automake distributes README files by default, the only reason why README had to be listed in EXTRA_DIST was to make these README files generated. Since README is also listed in noinst_DATA, we can safely replace README in EXTRA_DIST with $(DATA), this also opens the way for further EXTRA_DIST cleanup. * modules/*/Makefile.am (EXTRA_DIST): Replace README with $(DATA).
* modules/*/Makefile.am: reorder lines to promote uniformityDmitry V. Levin2020-04-271-1/+0
| | | | | This is essentially a no-op change that makes modules/*/Makefile.am files less divergent.
* build: move README prerequisites rule from modules/*/Makefile.am to ↵Dmitry V. Levin2020-04-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make.xml.rules As the rule is now the same in every modules/*/Makefile.am file, move it to Make.xml.rules. * Make.xml.rules (README): New prerequisites rule. * modules/pam_access/Makefile.am (README): Remove rule. * modules/pam_cracklib/Makefile.am (README): Likewise. * modules/pam_debug/Makefile.am (README): Likewise. * modules/pam_deny/Makefile.am (README): Likewise. * modules/pam_echo/Makefile.am (README): Likewise. * modules/pam_env/Makefile.am (README): Likewise. * modules/pam_exec/Makefile.am (README): Likewise. * modules/pam_faildelay/Makefile.am (README): Likewise. * modules/pam_filter/Makefile.am (README): Likewise. * modules/pam_ftp/Makefile.am (README): Likewise. * modules/pam_group/Makefile.am (README): Likewise. * modules/pam_issue/Makefile.am (README): Likewise. * modules/pam_keyinit/Makefile.am (README): Likewise. * modules/pam_lastlog/Makefile.am (README): Likewise. * modules/pam_limits/Makefile.am (README): Likewise. * modules/pam_listfile/Makefile.am (README): Likewise. * modules/pam_localuser/Makefile.am (README): Likewise. * modules/pam_loginuid/Makefile.am (README): Likewise. * modules/pam_mail/Makefile.am (README): Likewise. * modules/pam_mkhomedir/Makefile.am (README): Likewise. * modules/pam_motd/Makefile.am (README): Likewise. * modules/pam_namespace/Makefile.am (README): Likewise. * modules/pam_nologin/Makefile.am (README): Likewise. * modules/pam_permit/Makefile.am (README): Likewise. * modules/pam_pwhistory/Makefile.am (README): Likewise. * modules/pam_rhosts/Makefile.am (README): Likewise. * modules/pam_rootok/Makefile.am (README): Likewise. * modules/pam_securetty/Makefile.am (README): Likewise. * modules/pam_selinux/Makefile.am (README): Likewise. * modules/pam_sepermit/Makefile.am (README): Likewise. * modules/pam_setquota/Makefile.am (README): Likewise. * modules/pam_shells/Makefile.am (README): Likewise. * modules/pam_succeed_if/Makefile.am (README): Likewise. * modules/pam_tally/Makefile.am (README): Likewise. * modules/pam_tally2/Makefile.am (README): Likewise. * modules/pam_time/Makefile.am (README): Likewise. * modules/pam_timestamp/Makefile.am (README): Likewise. * modules/pam_tty_audit/Makefile.am (README): Likewise. * modules/pam_umask/Makefile.am (README): Likewise. * modules/pam_unix/Makefile.am (README): Likewise. * modules/pam_userdb/Makefile.am (README): Likewise. * modules/pam_usertype/Makefile.am (README): Likewise. * modules/pam_warn/Makefile.am (README): Likewise. * modules/pam_wheel/Makefile.am (README): Likewise. * modules/pam_xauth/Makefile.am (README): Likewise.
* modules/*/Makefile.am: list prerequisites of README target uniformlyDmitry V. Levin2020-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to list prerequisites of README targets manually as all README targets depend on $(XMLS). The change is performed automatically using the following script: sed -i 's/^README: pam_.*/README: $(XMLS)/' modules/*/Makefile.am * modules/pam_access/Makefile.am (README): Replace pam_access.8.xml and access.conf.5.xml with $(XMLS). * modules/pam_cracklib/Makefile.am (README): Replace pam_cracklib.8.xml with $(XMLS). * modules/pam_debug/Makefile.am (README): Replace pam_debug.8.xml with $(XMLS). * modules/pam_deny/Makefile.am (README): Replace pam_deny.8.xml with $(XMLS). * modules/pam_echo/Makefile.am (README): Replace pam_echo.8.xml with $(XMLS). * modules/pam_env/Makefile.am (README): Replace pam_env.8.xml and pam_env.conf.5.xml with $(XMLS). * modules/pam_exec/Makefile.am (README): Replace pam_exec.8.xml with $(XMLS). * modules/pam_faildelay/Makefile.am (README): Replace pam_faildelay.8.xml with $(XMLS). * modules/pam_filter/Makefile.am (README): Replace pam_filter.8.xml with $(XMLS). * modules/pam_ftp/Makefile.am (README): Replace pam_ftp.8.xml with $(XMLS). * modules/pam_group/Makefile.am (README): Replace pam_group.8.xml and group.conf.5.xml with $(XMLS). * modules/pam_issue/Makefile.am (README): Replace pam_issue.8.xml with $(XMLS). * modules/pam_keyinit/Makefile.am (README): Replace pam_keyinit.8.xml with $(XMLS). * modules/pam_lastlog/Makefile.am (README): Replace pam_lastlog.8.xml with $(XMLS). * modules/pam_limits/Makefile.am (README): Replace pam_limits.8.xml and limits.conf.5.xml with $(XMLS). * modules/pam_listfile/Makefile.am (README): Replace pam_listfile.8.xml with $(XMLS). * modules/pam_localuser/Makefile.am (README): Replace pam_localuser.8.xml with $(XMLS). * modules/pam_loginuid/Makefile.am (README): Replace pam_loginuid.8.xml with $(XMLS). * modules/pam_mail/Makefile.am (README): Replace pam_mail.8.xml with $(XMLS). * modules/pam_mkhomedir/Makefile.am (README): Replace pam_mkhomedir.8.xml with $(XMLS). * modules/pam_motd/Makefile.am (README): Replace pam_motd.8.xml with $(XMLS). * modules/pam_namespace/Makefile.am (README): Replace pam_namespace.8.xml, namespace.conf.5.xml, and pam_namespace_helper.8.xml with $(XMLS). * modules/pam_nologin/Makefile.am (README): Replace pam_nologin.8.xml with $(XMLS). * modules/pam_permit/Makefile.am (README): Replace pam_permit.8.xml with $(XMLS). * modules/pam_pwhistory/Makefile.am (README): Replace pam_pwhistory.8.xml with $(XMLS). * modules/pam_rhosts/Makefile.am (README): Replace pam_rhosts.8.xml with $(XMLS). * modules/pam_rootok/Makefile.am (README): Replace pam_rootok.8.xml with $(XMLS). * modules/pam_securetty/Makefile.am (README): Replace pam_securetty.8.xml with $(XMLS). * modules/pam_selinux/Makefile.am (README): Replace pam_selinux.8.xml with $(XMLS). * modules/pam_sepermit/Makefile.am (README): Replace pam_sepermit.8.xml with $(XMLS). * modules/pam_setquota/Makefile.am (README): Replace pam_setquota.8.xml with $(XMLS). * modules/pam_shells/Makefile.am (README): Replace pam_shells.8.xml with $(XMLS). * modules/pam_succeed_if/Makefile.am (README): Replace pam_succeed_if.8.xml with $(XMLS). * modules/pam_tally/Makefile.am (README): Replace pam_tally.8.xml with $(XMLS). * modules/pam_tally2/Makefile.am (README): Replace pam_tally2.8.xml with $(XMLS). * modules/pam_time/Makefile.am (README): Replace pam_time.8.xml and time.conf.5.xml with $(XMLS). * modules/pam_timestamp/Makefile.am (README): Replace pam_timestamp.8.xml with $(XMLS). * modules/pam_tty_audit/Makefile.am (README): Replace pam_tty_audit.8.xml with $(XMLS). * modules/pam_umask/Makefile.am (README): Replace pam_umask.8.xml with $(XMLS). * modules/pam_unix/Makefile.am (README): Replace pam_unix.8.xml with $(XMLS). * modules/pam_userdb/Makefile.am (README): Replace pam_userdb.8.xml with $(XMLS). * modules/pam_usertype/Makefile.am (README): Replace pam_usertype.8.xml with $(XMLS). * modules/pam_warn/Makefile.am (README): Replace pam_warn.8.xml with $(XMLS). * modules/pam_wheel/Makefile.am (README): Replace pam_wheel.8.xml with $(XMLS). * modules/pam_xauth/Makefile.am (README): Replace pam_xauth.8.xml with $(XMLS).
* modules/*/Makefile.am: list tests in EXTRA_DIST uniformlyDmitry V. Levin2020-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The change was prepared using the following script: git grep -l '^TESTS = tst-pam_' modules/ |while read m; do t="$(sed '/^TESTS = tst-pam_/!d;s/^TESTS = //;q' -- "$m")" sed -i "/^EXTRA_DIST =/ s/$t\\>/\$(TESTS)/" -- "$m" done * modules/pam_access/Makefile.am (EXTRA_DIST): Replace tst-pam_access with $(TESTS). * modules/pam_cracklib/Makefile.am (EXTRA_DIST): Replace tst-pam_cracklib with $(TESTS). * modules/pam_debug/Makefile.am (EXTRA_DIST): Replace tst-pam_debug with $(TESTS). * modules/pam_deny/Makefile.am (EXTRA_DIST): Replace tst-pam_deny with $(TESTS). * modules/pam_echo/Makefile.am (EXTRA_DIST): Replace tst-pam_echo with $(TESTS). * modules/pam_env/Makefile.am (EXTRA_DIST): Replace tst-pam_env with $(TESTS). * modules/pam_exec/Makefile.am (EXTRA_DIST): Replace tst-pam_exec with $(TESTS). * modules/pam_faildelay/Makefile.am (EXTRA_DIST): Replace tst-pam_faildelay with $(TESTS). * modules/pam_filter/Makefile.am (EXTRA_DIST): Replace tst-pam_filter with $(TESTS). * modules/pam_ftp/Makefile.am (EXTRA_DIST): Replace tst-pam_ftp with $(TESTS). * modules/pam_group/Makefile.am (EXTRA_DIST): Replace tst-pam_group with $(TESTS). * modules/pam_issue/Makefile.am (EXTRA_DIST): Replace tst-pam_issue with $(TESTS). * modules/pam_keyinit/Makefile.am (EXTRA_DIST): Replace tst-pam_keyinit with $(TESTS). * modules/pam_lastlog/Makefile.am (EXTRA_DIST): Replace tst-pam_lastlog with $(TESTS). * modules/pam_limits/Makefile.am (EXTRA_DIST): Replace tst-pam_limits with $(TESTS). * modules/pam_listfile/Makefile.am (EXTRA_DIST): Replace tst-pam_listfile with $(TESTS). * modules/pam_localuser/Makefile.am (EXTRA_DIST): Replace tst-pam_localuser with $(TESTS). * modules/pam_loginuid/Makefile.am (EXTRA_DIST): Replace tst-pam_loginuid with $(TESTS). * modules/pam_mail/Makefile.am (EXTRA_DIST): Replace tst-pam_mail with $(TESTS). * modules/pam_mkhomedir/Makefile.am (EXTRA_DIST): Replace tst-pam_mkhomedir with $(TESTS). * modules/pam_motd/Makefile.am (EXTRA_DIST): Replace tst-pam_motd with $(TESTS). * modules/pam_namespace/Makefile.am (EXTRA_DIST): Replace tst-pam_namespace with $(TESTS). * modules/pam_nologin/Makefile.am (EXTRA_DIST): Replace tst-pam_nologin with $(TESTS). * modules/pam_permit/Makefile.am (EXTRA_DIST): Replace tst-pam_permit with $(TESTS). * modules/pam_pwhistory/Makefile.am (EXTRA_DIST): Replace tst-pam_pwhistory with $(TESTS). * modules/pam_rhosts/Makefile.am (EXTRA_DIST): Replace tst-pam_rhosts with $(TESTS). * modules/pam_rootok/Makefile.am (EXTRA_DIST): Replace tst-pam_rootok with $(TESTS). * modules/pam_securetty/Makefile.am (EXTRA_DIST): Replace tst-pam_securetty with $(TESTS). * modules/pam_sepermit/Makefile.am (EXTRA_DIST): Replace tst-pam_sepermit with $(TESTS). * modules/pam_setquota/Makefile.am (EXTRA_DIST): Replace tst-pam_setquota with $(TESTS). * modules/pam_shells/Makefile.am (EXTRA_DIST): Replace tst-pam_shells with $(TESTS). * modules/pam_stress/Makefile.am (EXTRA_DIST): Replace tst-pam_stress with $(TESTS). * modules/pam_succeed_if/Makefile.am (EXTRA_DIST): Replace tst-pam_succeed_if with $(TESTS). * modules/pam_tally/Makefile.am (EXTRA_DIST): Replace tst-pam_tally with $(TESTS). * modules/pam_tally2/Makefile.am (EXTRA_DIST): Replace tst-pam_tally2 with $(TESTS). * modules/pam_time/Makefile.am (EXTRA_DIST): Replace tst-pam_time with $(TESTS). * modules/pam_tty_audit/Makefile.am (EXTRA_DIST): Replace tst-pam_tty_audit with $(TESTS). * modules/pam_umask/Makefile.am (EXTRA_DIST): Replace tst-pam_umask with $(TESTS). * modules/pam_userdb/Makefile.am (EXTRA_DIST): Replace tst-pam_userdb with $(TESTS). * modules/pam_usertype/Makefile.am (EXTRA_DIST): Replace tst-pam_usertype with $(TESTS). * modules/pam_warn/Makefile.am (EXTRA_DIST): Replace tst-pam_warn with $(TESTS). * modules/pam_wheel/Makefile.am (EXTRA_DIST): Replace tst-pam_wheel with $(TESTS). * modules/pam_xauth/Makefile.am (EXTRA_DIST): Replace tst-pam_xauth with $(TESTS).
* pam_setquota: remove PAM_EXTERN and PAM_STATIC partsDmitry V. Levin2020-04-241-15/+8
| | | | | | | In other modules they were removed by commit Linux-PAM-1.3.0~14. * modules/pam_setquota/pam_setquota.c: Remove PAM_EXTERN and PAM_STATIC parts.
* pam_setquota: fix more harmless compilation warningsDmitry V. Levin2020-04-241-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On ppc64le the compiler complains with the following diagnostics: pam_setquota.c: In function 'debug': pam_setquota.c:48:59: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 6 has type '__u64' {aka 'const long unsigned int'} [-Wformat=] 48 | pam_syslog(pamh, LOG_DEBUG, "%s device=%s bsoftlimit=%llu bhardlimit=%llu " | ~~~^ | | | long long unsigned int | %lu ...... 51 | p->dqb_bsoftlimit, p->dqb_bhardlimit, | ~~~~~~~~~~~~~~~~~ | | | __u64 {aka const long unsigned int} pam_setquota.c:48:75: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 7 has type '__u64' {aka 'const long unsigned int'} [-Wformat=] 48 | pam_syslog(pamh, LOG_DEBUG, "%s device=%s bsoftlimit=%llu bhardlimit=%llu " | ~~~^ | | | long long unsigned int | %lu ...... 51 | p->dqb_bsoftlimit, p->dqb_bhardlimit, | ~~~~~~~~~~~~~~~~~ | | | __u64 {aka const long unsigned int} pam_setquota.c:48:31: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 8 has type '__u64' {aka 'const long unsigned int'} [-Wformat=] 48 | pam_syslog(pamh, LOG_DEBUG, "%s device=%s bsoftlimit=%llu bhardlimit=%llu " | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ...... 52 | p->dqb_isoftlimit, p->dqb_ihardlimit, | ~~~~~~~~~~~~~~~~~ | | | __u64 {aka const long unsigned int} pam_setquota.c:49:46: note: format string is defined here 49 | "isoftlimit=%llu ihardlimit=%llu btime=%llu itime=%llu", | ~~~^ | | | long long unsigned int | %lu pam_setquota.c:48:31: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 9 has type '__u64' {aka 'const long unsigned int'} [-Wformat=] 48 | pam_syslog(pamh, LOG_DEBUG, "%s device=%s bsoftlimit=%llu bhardlimit=%llu " | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ...... 52 | p->dqb_isoftlimit, p->dqb_ihardlimit, | ~~~~~~~~~~~~~~~~~ | | | __u64 {aka const long unsigned int} pam_setquota.c:49:62: note: format string is defined here 49 | "isoftlimit=%llu ihardlimit=%llu btime=%llu itime=%llu", | ~~~^ | | | long long unsigned int | %lu pam_setquota.c:48:31: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 10 has type '__u64' {aka 'const long unsigned int'} [-Wformat=] 48 | pam_syslog(pamh, LOG_DEBUG, "%s device=%s bsoftlimit=%llu bhardlimit=%llu " | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ...... 53 | p->dqb_btime, p->dqb_itime); | ~~~~~~~~~~~~ | | | __u64 {aka const long unsigned int} pam_setquota.c:49:73: note: format string is defined here 49 | "isoftlimit=%llu ihardlimit=%llu btime=%llu itime=%llu", | ~~~^ | | | long long unsigned int | %lu pam_setquota.c:48:31: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 11 has type '__u64' {aka 'const long unsigned int'} [-Wformat=] 48 | pam_syslog(pamh, LOG_DEBUG, "%s device=%s bsoftlimit=%llu bhardlimit=%llu " | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ...... 53 | p->dqb_btime, p->dqb_itime); | ~~~~~~~~~~~~ | | | __u64 {aka const long unsigned int} pam_setquota.c:49:84: note: format string is defined here 49 | "isoftlimit=%llu ihardlimit=%llu btime=%llu itime=%llu", | ~~~^ | | | long long unsigned int | %lu * modules/pam_setquota/pam_setquota.c (debug): Cast fields of type __u64 to unsigned long long.
* pam_setquota: apply WARN_CFLAGSDmitry V. Levin2020-04-241-1/+2
| | | | | | All other modules already build with WARN_CFLAGS. * modules/pam_setquota/Makefile.am (AM_CFLAGS): Add $(WARN_CFLAGS).
* pam_setquota: fix harmless compilation warningsDmitry V. Levin2020-04-241-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix -Wunused-variable compilation warnings: pam_setquota.c: In function 'pam_sm_open_session': pam_setquota.c:173:9: warning: unused variable 'ep' [-Wunused-variable] 173 | char *ep, *val, *mntdevice = NULL; | ^~ pam_setquota.c:172:17: warning: unused variable 'ul' [-Wunused-variable] 172 | unsigned long ul; | ^~ Fix -Wunused-parameter compilation warnings: pam_setquota.c: In function 'pam_sm_open_session': pam_setquota.c:169:60: warning: unused parameter 'flags' [-Wunused-parameter] 169 | PAM_EXTERN int pam_sm_open_session(pam_handle_t *pamh, int flags, int argc, | ~~~~^~~~~ pam_setquota.c: In function 'pam_sm_close_session': pam_setquota.c:382:40: warning: unused parameter 'pamh' [-Wunused-parameter] 382 | int pam_sm_close_session(pam_handle_t *pamh, int flags, int argc, | ~~~~~~~~~~~~~~^~~~ pam_setquota.c:382:50: warning: unused parameter 'flags' [-Wunused-parameter] 382 | int pam_sm_close_session(pam_handle_t *pamh, int flags, int argc, | ~~~~^~~~~ pam_setquota.c:382:61: warning: unused parameter 'argc' [-Wunused-parameter] 382 | int pam_sm_close_session(pam_handle_t *pamh, int flags, int argc, | ~~~~^~~~ pam_setquota.c:383:39: warning: unused parameter 'argv' [-Wunused-parameter] 383 | const char **argv) { | ~~~~~~~~~~~~~^~~~ * modules/pam_setquota/pam_setquota.c (pam_sm_open_session): Mark 'flags' parameter as unused. Remove unused 'ep' and 'ul' variables. (pam_sm_close_session): Mark all parameters as unused.
* pam_setquota: new module to set or modify disk quotas on session startSven Hartge2020-04-175-0/+769
This makes disk quotas usable with central user databases, such as MySQL or LDAP. Resolves: https://github.com/linux-pam/linux-pam/issues/92
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-08 09:00:42 +0000