diff options
Diffstat (limited to 'Makefile.in')
| -rw-r--r-- | Makefile.in | 354 |
1 files changed, 0 insertions, 354 deletions
diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index 121df11f..00000000 --- a/Makefile.in +++ /dev/null @@ -1,354 +0,0 @@ -# Makefile.in for building crosstool-NG -# This file serves as source for the ./configure operation - -# This series of test is here because GNU make 3.81 will *not* use MAKEFLAGS -# to set additional flags in the current Makfile ( see: -# http://savannah.gnu.org/bugs/?20501 ), although the make manual says it -# should ( see: http://www.gnu.org/software/make/manual/make.html#Options_002fRecursion ) -# so we have to work it around by calling ourselves back if needed - -# So why do we need not to use the built rules and variables? Because we -# need to generate scripts/crosstool-NG.sh from scripts/crosstool-NG.sh.in -# and there is a built-in implicit rule '%.sh:' that has neither a pre-requisite -# nor a command associated, and that built-in implicit rule takes precedence -# over our non-built-in implicit rule '%: %.in', below. - -# CT_MAKEFLAGS will be used later, below... - -# Do not print directories as we descend into them -ifeq ($(filter --no-print-directory,$(MAKEFLAGS)),) -CT_MAKEFLAGS += --no-print-directory -endif - -# Use neither builtin rules, nor builtin variables -# Note: dual test, because if -R and -r are given on the command line -# (who knows?), MAKEFLAGS contains 'Rr' instead of '-Rr', while adding -# '-Rr' to MAKEFLAGS adds it literaly ( and does not add 'Rr' ) -# Further: quad test because the flags 'rR' and '-rR' can be reordered. -ifeq ($(filter Rr,$(MAKEFLAGS)),) -ifeq ($(filter -Rr,$(MAKEFLAGS)),) -ifeq ($(filter rR,$(MAKEFLAGS)),) -ifeq ($(filter -rR,$(MAKEFLAGS)),) -CT_MAKEFLAGS += -Rr -endif # No -rR -endif # No rR -endif # No -Rr -endif # No Rr - -# Helper: print abbreviation of the command by default, or full command -# if doing 'make V=1'. -__silent = $(if $(V),,@printf ' %-7s %s\n' '$1' '$(if $2,$2,$(strip $<))' && ) -__silent_rm = $(call __silent,RM,$1)rm -f $1 -__silent_rmdir = $(call __silent,RMDIR,$1)rm -rf $1 - -# Remove any suffix rules -.SUFFIXES: - -all: configure Makefile build - -############################################################################### -# Configuration variables - -# Stuff found by ./configure -export DATE := @DATE@ -export LOCAL := @enable_local@ -export PROG_SED := @program_transform_name@ -export PACKAGE_TARNAME := @PACKAGE_TARNAME@ -export VERSION := @PACKAGE_VERSION@ -export prefix := @prefix@ -export exec_prefix := @exec_prefix@ -export datarootdir := @datarootdir@ -export bindir := @bindir@ -export libdir := @libdir@ -export docdir := @docdir@ -export mandir := @mandir@ -export install := @INSTALL@ -export bash := @BASH_SHELL@ -export awk := @AWK@ -export grep := @GREP@ -export make := @MAKE@ -export sed := @SED@ -export wget := @wget@ -export curl := @curl@ -export libtool := @LIBTOOL@ -export libtoolize := @LIBTOOLIZE@ -export objcopy := @OBJCOPY@ -export objdump := @OBJDUMP@ -export readelf := @READELF@ -export patch := @PATCH@ -export gperf := @GPERF@ -export CPU_COUNT := @CPU_COUNT@ - -############################################################################### -# Non-configure variables -MAN_SECTION := 1 -MAN_SUBDIR := /man$(MAN_SECTION) - -PROG_NAME := $(shell echo 'ct-ng' |$(sed) -r -e '$(PROG_SED)' ) - -############################################################################### -# Sanity checks - -# Check if Makefile is up to date: -Makefile: Makefile.in - @echo "$< changed: you must re-run './configure'" - @false - -configure: configure.ac - @echo "$< changed: you must re-run './bootstrap'" - @false - -# If installing with DESTDIR, check it's an absolute path -ifneq ($(strip $(DESTDIR)),) - ifneq ($(DESTDIR),$(abspath /$(DESTDIR))) - $(error DESTDIR is not an absolute PATH: '$(DESTDIR)') - endif -endif - -############################################################################### -# Global make rules - -# If any extra MAKEFLAGS were added, re-run ourselves -# See top of file for an explanation of why this is needed... -ifneq ($(strip $(CT_MAKEFLAGS)),) - -# Somehow, the new auto-completion for make in the recent distributions -# trigger a behavior where our Makefile calls itself recursively, in a -# never-ending loop (except on lack of ressources, swap, PIDs...) -# Avoid this situation by cutting the recursion short at the first -# level. -# This has the side effect of only showing the real targets, and hiding our -# internal ones. :-) -ifneq ($(MAKELEVEL),0) -$(error Recursion detected, bailing out...) -endif - -MAKEFLAGS += $(CT_MAKEFLAGS) -build install clean distclean mrproper uninstall: - @$(MAKE) $@ - -else -# There were no additional MAKEFLAGS to add, do the job - -TARGETS := bin lib lib-kconfig doc man - -build: $(patsubst %,build-%,$(TARGETS)) - -install: build real-install - -clean: $(patsubst %,clean-%,$(TARGETS)) - -distclean: clean - $(call __silent_rm,Makefile kconfig/Makefile config/configure.in) - -mrproper: distclean - $(call __silent_rmdir,autom4te.cache config/gen config/versions) - $(call __silent_rm,config.log config.status configure) - -uninstall: real-uninstall - -############################################################################### -# Specific make rules - -#-------------------------------------- -# Build rules - -build-bin: $(PROG_NAME) \ - scripts/scripts.mk \ - scripts/crosstool-NG.sh \ - scripts/saveSample.sh - -build-lib: paths.mk \ - paths.sh - -build-lib-kconfig: - $(call __silent,ENTER,kconfig)$(MAKE) -C kconfig - $(call __silent,LEAVE,kconfig): - -build-doc: - -build-man: docs/$(PROG_NAME).1.gz - -docs/$(PROG_NAME).1.gz: docs/$(PROG_NAME).1 - $(call __silent,GZIP)gzip -c9n $< >$@ - -define sed_it - $(call __silent,SED,$@)$(sed) -r \ - -e 's,@@CT_BINDIR@@,$(bindir),g;' \ - -e 's,@@CT_LIBDIR@@,$(libdir),g;' \ - -e 's,@@CT_DOCDIR@@,$(docdir),g;' \ - -e 's,@@CT_MANDIR@@,$(mandir),g;' \ - -e 's,@@CT_PROG_NAME@@,$(PROG_NAME),g;' \ - -e 's,@@CT_VERSION@@,$(VERSION),g;' \ - -e 's,@@CT_DATE@@,$(DATE),g;' \ - -e 's,@@CT_make@@,$(make),g;' \ - -e 's,@@CT_bash@@,$(bash),g;' \ - -e 's,@@CT_awk@@,$(awk),g;' \ - -e 's,@@CT_wget@@,$(wget),g;' \ - -e 's,@@CT_curl@@,$(curl),g;' \ - -e 's,@@CT_cpucount@@,$(CPU_COUNT),g;' \ - $< >$@ -endef - -docs/$(PROG_NAME).1: docs/ct-ng.1.in Makefile - $(call sed_it) - -$(PROG_NAME): ct-ng.in Makefile - $(call sed_it) - $(call __silent,CHMOD,$@)chmod 755 $@ - -%: %.in Makefile - $(call sed_it) - -__paths_vars = install bash awk grep make sed libtool \ - libtoolize objcopy objdump readelf patch gperf - -# We create a script fragment that is parseable from inside a Makefile, -# and one from inside a shell script. -paths.mk: FORCE - $(call __silent,GEN,$@){ $(foreach w,$(__paths_vars),$(if $($w),echo 'export $w=$(subst ','\'',$($w))';)) :; } >$@ - -paths.sh: FORCE - $(call __silent,GEN,$@){ $(foreach w,$(__paths_vars),$(if $($w),echo 'export $w="$(subst ','\'',$($w))"';)) :; } >$@ - -FORCE: - -#-------------------------------------- -# Clean rules - -clean-bin: - $(call __silent_rm,$(PROG_NAME)) - $(call __silent_rm,scripts/scripts.mk) - $(call __silent_rm,scripts/crosstool-NG.sh) - $(call __silent_rm,scripts/saveSample.sh) - -clean-lib: - $(call __silent_rm,paths.mk paths.sh) - -clean-lib-kconfig: - $(call __silent,ENTER,kconfig)$(MAKE) -C kconfig clean - $(call __silent,LEAVE,kconfig): - -clean-doc: - -clean-man: - $(call __silent_rm,docs/$(PROG_NAME).1) - $(call __silent_rm,docs/$(PROG_NAME).1.gz) - -#-------------------------------------- -# Check for --local setup - -ifeq ($(strip $(LOCAL)),yes) - -real-install: - @true - -real-uninstall: - @true - -else - -#-------------------------------------- -# Install rules - -real-install: $(patsubst %,install-%,$(TARGETS)) install-post - -install-bin: $(DESTDIR)$(bindir) - $(call __silent,INST,$(PROG_NAME))$(install) -m 755 $(PROG_NAME) "$(DESTDIR)$(bindir)/$(PROG_NAME)" - -# If one is hacking crosstool-NG, the patch set might change between any two -# installations of the same VERSION, thus the patches must be removed prior -# to being installed. It is the responsibility of the user to call uninstall -# first, if (s)he deems it necessary -install-lib: $(DESTDIR)$(libdir) \ - install-lib-main \ - install-lib-samples - -LIB_SUB_DIR := config contrib packages scripts -$(patsubst %,install-lib-%-copy,$(LIB_SUB_DIR)): install-lib-%-copy: $(DESTDIR)$(libdir) - $(call __silent,INSTDIR,$*)tar cf - --exclude='*.sh.in' --exclude='*.in.in' --exclude=.gitignore $* \ - |(cd "$(DESTDIR)$(libdir)"; tar xf -) - -# Dependency-only by default. -$(patsubst %,install-lib-%,$(LIB_SUB_DIR)): install-lib-%: install-lib-%-copy - -install-lib-main: $(DESTDIR)$(libdir) $(patsubst %,install-lib-%,$(LIB_SUB_DIR)) - $(call __silent,INST,steps.mk)$(install) -m 644 steps.mk "$(DESTDIR)$(libdir)" - $(call __silent,INST,paths.mk)$(install) -m 644 paths.mk "$(DESTDIR)$(libdir)" - $(call __silent,INST,paths.sh)$(install) -m 644 paths.sh "$(DESTDIR)$(libdir)" - -# Samples need a little love: -# - change every occurrence of CT_TOP_DIR to CT_LIB_DIR -install-lib-samples: $(DESTDIR)$(libdir) install-lib-main - $(call __silent,INSTDIR,samples)for samp_dir in samples/*/; do \ - mkdir -p "$(DESTDIR)$(libdir)/$${samp_dir}"; \ - $(sed) -r -e 's:\$$\{CT_TOP_DIR\}:\$$\{CT_LIB_DIR\}:;' \ - -e 's:^(CT_WORK_DIR)=.*:\1="\$${CT_TOP_DIR}/.build":;' \ - $${samp_dir}/crosstool.config \ - >"$(DESTDIR)$(libdir)/$${samp_dir}/crosstool.config"; \ - $(install) -m 644 "$${samp_dir}/reported.by" \ - "$(DESTDIR)$(libdir)/$${samp_dir}"; \ - for libc_cfg in "$${samp_dir}/"*libc*.config; do \ - [ -f "$${libc_cfg}" ] || continue; \ - $(install) -m 644 "$${libc_cfg}" \ - "$(DESTDIR)$(libdir)/$${samp_dir}"; \ - done; \ - [ -e "$${samp_dir}/broken" ] && \ - $(install) -m 644 "$${samp_dir}/broken" \ - "$(DESTDIR)$(libdir)/$${samp_dir}/" || :; \ - done - @$(install) -m 644 samples/samples.mk "$(DESTDIR)$(libdir)/samples/samples.mk" - -install-lib-kconfig: $(DESTDIR)$(libdir) install-lib-main - $(call __silent,MKDIR,$@)$(install) -m 755 -d "$(DESTDIR)$(libdir)/kconfig" - $(call __silent,ENTER,kconfig)$(MAKE) -C kconfig install \ - DESTDIR=$(DESTDIR)$(libdir)/kconfig - $(call __silent,LEAVE,kconfig): - -install-doc: install-doc-$(if $(wildcard docs/MANUAL_ONLINE),message,real) - -install-doc-message: - @echo "********************************************************************" - @echo " You are building from a development version that does not include" - @echo " the documentation. Refer to the manual online at:" - @echo " http://crosstool-ng.github.io/docs" - @echo "********************************************************************" - -install-doc-real: $(DESTDIR)$(docdir) - $(call __silent,INST,docs)for doc_file in docs/manual/*.md; do \ - $(install) -m 644 "$${doc_file}" "$(DESTDIR)$(docdir)"; \ - done - -install-man: $(DESTDIR)$(mandir)$(MAN_SUBDIR) - $(call __silent,INST,$(PROG_NAME).1.gz)$(install) -m 644 docs/$(PROG_NAME).1.gz "$(DESTDIR)$(mandir)$(MAN_SUBDIR)" - -$(sort $(DESTDIR)$(bindir) $(DESTDIR)$(libdir) $(DESTDIR)$(docdir) $(DESTDIR)$(mandir)$(MAN_SUBDIR)): - $(call __silent,MKDIR,$@)$(install) -m 755 -d "$@" - -install-post: - @echo - @echo "For auto-completion, do not forget to install '$(PROG_NAME).comp' into" - @echo "your bash completion directory (usually /etc/bash_completion.d)" - -#-------------------------------------- -# Uninstall rules - -real-uninstall: $(patsubst %,uninstall-%,$(filter-out lib-kconfig,$(TARGETS))) - -uninstall-bin: - $(call __silent_rm,$(DESTDIR)$(bindir)/$(PROG_NAME)) - -uninstall-lib: - $(call __silent_rmdir,$(DESTDIR)$(libdir)) - -uninstall-doc: - $(call __silent_rmdir,$(DESTDIR)$(docdir)) - -uninstall-man: - $(call __silent_rm,$(DESTDIR)$(mandir)$(MAN_SUBDIR)/$(PROG_NAME).1.gz) - -endif # Not --local - -endif # No extra MAKEFLAGS were added - -.PHONY: build $(patsubst %,build-%,$(TARGETS)) install |