aboutsummaryrefslogtreecommitdiff
path: root/scripts/build/companion_libs/130-cloog.sh
Commit message (Collapse)AuthorAgeFilesLines
* Enable support for building libgccjitMarc Poulhiès2022-12-181-0/+4
| | | | | | | | | | | | | | | | | | | | | libgccjit is still under development and, despite its name, may also be used for ahead-of-time compilation. Documentation can be found on the gcc website: https://gcc.gnu.org/onlinedocs/jit/internals/index.html https://gcc.gnu.org/wiki/JIT With this change it's possible to enable the building of the libgccjit. It's enabled as a language (with --enable-languages=jit) even if not a language frontend at all. The main changes are related to the requirement of having everything host side built as Position Independent Code (PIC) with --enable-host-shared. GCC has the needed logic for building its dependencies (mpc, gmp, mpfr, ...) correctly when built "in-tree", which is not the case with crosstool-ng (see https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=05048fc29f0) Signed-off-by: Marc Poulhiès <dkm@kataplop.net>
* Rename JOBSFLAGS -> CT_JOBSFLAGSAlexey Neyman2019-04-041-2/+2
| | | | | | ... so that it is saved/restored when restarting the build. Signed-off-by: Alexey Neyman <stilor@att.net>
* Config v2: select relevant parts of each package versionAlexey Neyman2019-01-301-5/+3
| | | | | | | Also, remove a couple of config options that dealt with package versions that have been since retired. Signed-off-by: Alexey Neyman <stilor@att.net>
* Fix the references to old config variablesAlexey Neyman2017-07-081-9/+3
| | | | Signed-off-by: Alexey Neyman <stilor@att.net>
* Switch comp.libs/tools and debug to new framework.Alexey Neyman2017-07-081-1/+1
| | | | Signed-off-by: Alexey Neyman <stilor@att.net>
* Skip comp.libs checking on host for canadianAlexey Neyman2017-02-111-2/+7
| | | | | | | ... they all want to run the binaries they produced, which fails when build!=host. Signed-off-by: Alexey Neyman <stilor@att.net>
* Add zlib as a companion libAlexey Neyman2017-02-051-1/+0
| | | | | | with version 1.2.11. Signed-off-by: Alexey Neyman <stilor@att.net>
* Run all configure scripts using ${CONFIG_SHELL}Alexey Neyman2017-01-251-0/+1
| | | | | | ... as its help message says in menuconfig. Signed-off-by: Alexey Neyman <stilor@att.net>
* Partially revert 6f8e89cb5ca061e899bf3feaaf3fecf30d366c3e.Alexey Neyman2016-11-201-3/+3
| | | | | | | | | | | | | | | | | | The referenced commit replaced 'make' with '${make}' everywhere. This is wrong for at least the utilities that we may build as companion tools (make, libtool): this will always invoke the version detected by configure by supplying the absolute path. In other words, the wrappers in .build/tools/bin are not fallbacks - they are either temporary (in case a respective companion tool is built) or permanent redirectors. This is the reason why the PATH= has .build/*/buildtools/bin at higher precedence than .build/tools/bin; the latter has the versions detected by configure and the former has the versions built as companion tools. Revert the rest of the gang (grep/sed/...) for consistency. After all, we may decide to supply some of them as well (awk, for instance). Signed-off-by: Alexey Neyman <stilor@att.net>
* Whitespace: We don't use tabs in shell or kconfig filesBryan Hundven2015-12-081-10/+10
| | | | | | | We indent by multiples of 4. This change cleans up whitespace in offending files. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
* PPL: Remove support for PPL and CLooG/PPLBryan Hundven2015-11-291-54/+21
| | | | | | | | | | | | | | | | | | | | | Now that versions of gcc that required PPL are no longer supported ( >= gcc-4.5.x AND <= gcc-4.7.x ) ...we no longer require PPL or CLooG/PPL. This commit: * Removes PPL * Removes CLooG/PPL * Updates the documentation * Updates build script for CLooG and GCC * Removes PPL and CLooG/PPL from scripts/addToolVersion.sh and scripts/showSamples.sh * Adds ISL to scripts/addToolVersion.sh and scripts/showSamples.sh I know that sounds like a lot for one commit, but it was all kind of inter-tangled. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
* consistency: Use exported variables of required toolsBryan Hundven2015-11-171-3/+3
| | | | | | | | | | | | | | | | | | | | | | We check for apps: * make * sed * grep * awk * libtool/libtoolize * install * patch * and more ...during configure. Our scripts should be consistent about using the variables that define where the found tool was found. Of course, we do hard-link these tools in buildtools, but that should be a backup for the components we are building. Our scripts should always use the tools we find. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
* Build companion libs for target.Alexey Neyman2015-11-131-3/+4
| | | | | | | Currently, only libelf has a for-target step - but it generalizes the step to hook other libraries into this step. Signed-off-by: Alexey Neyman <stilor@att.net>
* comp_libs: Fix download locations for cloog and mpcBryan Hundven2015-04-261-1/+2
| | | | | | This change closes #62 Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
* scripts: Update download locationsBryan Hundven2014-12-081-2/+1
| | | | | | | | | | | | | | This change updates the download locations to default to the official download site. For gcc and gdb, also separate out the linaro download locations so that if you are downloading the linaro variant, it skips trying to download from the official gcc mirror. This commit closes #3 Signed-off-by: Bryan Hundven <bryanhundven@gmail.com> Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* complibs/cloog: add support for the ISL backendYann E. MORIN"2013-05-051-22/+49
| | | | | | | | | | | | | CLooG 0.18+ will use ISL instead of PPL, so we have to configure adequately depending of which backend is in use. The Kconfig entries will decide for us which is selected, so we can rely on either PPL xor ISL to be selected, not both. Reported-by: "Plotnikov Dmitry" <leitz@ispras.ru> [Dmitry did a preliminray patch to add ISL support, which this patch is inspired from] Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
* scripts: add BUILD/HOST extra cflags/ldflagsYann Diorcet2012-11-161-1/+7
| | | | | | | | | | | | | | | | On some hosts, and for certain toolchains (eg. toolchain targetting the upcoming Darwin), it may be necessary to pass arbitrary CFLAGS and/or LDFLAGS when building the components. And necessary infrastructure: - EXTRA_{CFLAGS,LDFLAGS}_FOR_{BUILD,HOST} as config options - pass those extra flags to components Fix-up a slight typo in elf2flt at the same time (misnamed cflags). Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com> Message-Id: <d24043276c9243a35421.1353077450@macbook-smorlat.local> Patchwork-Id: 199645
* complibs: introduce generic multi-complibs infrastructureYann Diorcet (diorcet yann2012-11-161-0/+122
Use the same method as companion tools for providing generic and extendable companion libs. Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com> Message-Id: <515c5c4635d99ebe4877.1353074410@macbook-smorlat.local> Patchwork-Id: 199613
generated by cgit v1.2.3 (git 2.46.0) at 2026-01-12 00:24:31 +0000