1998-11-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>

	Clean up linux emulation code to make it architecture-independent
	as much as possible.

	* linux: Renamed from linuxdev.
	* Makefile.in (objfiles): Add linux.o instead of linuxdev.o.
	(MAKE): New variable. Used for the linux.o target.
	* configure.in: Add AC_CHECK_TOOL(MAKE, make).
	* i386/i386/spl.h: Include <i386/ipl.h>, for compatibility with
	OSF Mach 3.0. Suggested by Elgin Lee <ehl@funghi.com>.
	* linux/src: Renamed from linux/linux.
	* linux/dev: Renamed from linux/mach.
	* linux/Drivers.in (AC_INIT): Use dev/include/linux/autoconf.h,
	instead of mach/include/linux/autoconf.h.
	* Makefile.in (all): Target ../linux.o instead of ../linuxdev.o.
	* linux/dev/drivers/block/genhd.c: Include <machine/spl.h> instead
	of <i386/ipl.h>.
	* linux/dev/drivers/net/auto_irq.c: Remove unneeded header files,
	<i386/ipl.h> and <i386/pic.h>.
	* linux/dev/init/main.c: Many i386-dependent codes moved to ...
	* linux/dev/arch/i386/irq.c: ... here.
	* linux/dev/arch/i386/setup.c: New file.
	* linux/dev/arch/i386/linux_emul.h: Likewise.
	* linux/dev/arch/i386/glue/timer.c: Merged into sched.c.
	* linux/dev/arch/i386/glue/sched.c: Include <machine/spl.h> instead
	of <i386/ipl.h>, and moved to ...
	* linux/dev/kernel/sched.c: ... here.
	* linux/dev/arch/i386/glue/block.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/blocl.c: ... here.
	* linux/dev/arch/i386/glue/net.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/net.c: ... here.
	* linux/dev/arch/i386/glue/misc.c: Remove `x86' and moved to ...
	* linux/dev/glue/misc.c: ... here.
	* linux/dev/arch/i386/glue/kmem.c: Moved to ...
	* linux/dev/glue/kmem.c: ... here.

1 files changed, 2174 insertions, 0 deletions

diff --git a/linux/src/drivers/net/3c59x.c b/linux/src/drivers/net/3c59x.c
new file mode 100644
index 00000000..c17e34b6
--- /dev/null
+++ b/linux/src/drivers/net/3c59x.c
@@ -0,0 +1,2174 @@
+/* EtherLinkXL.c: A 3Com EtherLink PCI III/XL ethernet driver for linux. */
+/*
+	Written 1996-1998 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU Public License, incorporated herein by reference.
+
+	This driver is for the 3Com "Vortex" and "Boomerang" series ethercards.
+	Members of the series include Fast EtherLink 3c590/3c592/3c595/3c597
+	and the EtherLink XL 3c900 and 3c905 cards.
+
+	The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O
+	Center of Excellence in Space Data and Information Sciences
+	   Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
+*/
+
+static char *version =
+"3c59x.c:v0.99E 5/12/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html\n";
+
+/* "Knobs" that adjust features and parameters. */
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+   Setting to > 1512 effectively disables this feature. */
+static const rx_copybreak = 200;
+/* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */
+static const mtu = 1500;
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 20;
+
+/* Put out somewhat more debugging messages. (0: no msg, 1 minimal .. 6). */
+#ifdef VORTEX_DEBUG
+static int vortex_debug = VORTEX_DEBUG;
+#else
+static int vortex_debug = 1;
+#endif
+
+/* Some values here only for performance evaluation and path-coverage
+   debugging. */
+static int rx_nocopy = 0, rx_copy = 0, queued_packet = 0, rx_csumhits;
+
+/* Enable the automatic media selection code -- usually set. */
+#define AUTOMEDIA 1
+
+/* Allow the use of fragment bus master transfers instead of only
+   programmed-I/O for Vortex cards.  Full-bus-master transfers are always
+   enabled by default on Boomerang cards.  If VORTEX_BUS_MASTER is defined,
+   the feature may be turned on using 'options'. */
+#define VORTEX_BUS_MASTER
+
+/* A few values that may be tweaked. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  ((400*HZ)/1000)
+
+/* Keep the ring sizes a power of two for efficiency. */
+#define TX_RING_SIZE	16
+#define RX_RING_SIZE	32
+#define PKT_BUF_SZ		1536			/* Size of each temporary Rx buffer.*/
+
+#include <linux/config.h>
+#ifdef MODULE
+#ifdef MODVERSIONS
+#include <linux/modversions.h>
+#endif
+#include <linux/module.h>
+#include <linux/version.h>
+#else
+#define MOD_INC_USE_COUNT
+#define MOD_DEC_USE_COUNT
+#endif
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/malloc.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/bios32.h>
+#include <linux/timer.h>
+#include <asm/irq.h>			/* For NR_IRQS only. */
+#include <asm/bitops.h>
+#include <asm/io.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+/* Kernel compatibility defines, common to David Hind's PCMCIA package.
+   This is only in the support-all-kernels source code. */
+#ifndef LINUX_VERSION_CODE
+#include <linux/version.h>		/* Redundant above, here for easy clean-up. */
+#endif
+#if LINUX_VERSION_CODE < 0x10300
+#define RUN_AT(x) (x)			/* What to put in timer->expires.  */
+#define DEV_ALLOC_SKB(len) alloc_skb(len, GFP_ATOMIC)
+#if defined(__alpha)
+#error "The Alpha architecture is only support with kernel version 2.0."
+#endif
+#define virt_to_bus(addr)  ((unsigned long)addr)
+#define bus_to_virt(addr) ((void*)addr)
+#define NR_IRQS 16
+#else  /* 1.3.0 and later */
+#define RUN_AT(x) (jiffies + (x))
+#define DEV_ALLOC_SKB(len) dev_alloc_skb(len)
+#endif
+#if LINUX_VERSION_CODE < 0x20159
+#define DEV_FREE_SKB(skb) dev_kfree_skb (skb, FREE_WRITE);
+#else  /* Grrr, unneeded incompatible change. */
+#define DEV_FREE_SKB(skb) dev_kfree_skb(skb);
+#endif
+
+#ifdef SA_SHIRQ
+#define FREE_IRQ(irqnum, dev) free_irq(irqnum, dev)
+#define REQUEST_IRQ(i,h,f,n, instance) request_irq(i,h,f,n, instance)
+#define IRQ(irq, dev_id, pt_regs) (irq, dev_id, pt_regs)
+#else
+#define FREE_IRQ(irqnum, dev) free_irq(irqnum)
+#define REQUEST_IRQ(i,h,f,n, instance) request_irq(i,h,f,n)
+#define IRQ(irq, dev_id, pt_regs) (irq, pt_regs)
+#endif
+
+#if (LINUX_VERSION_CODE >= 0x10344)
+#define NEW_MULTICAST
+#include <linux/delay.h>
+#else
+#define udelay(microsec)	do { int _i = 4*microsec; while (--_i > 0) { __SLOW_DOWN_IO; }} while (0)
+#endif
+
+#if LINUX_VERSION_CODE < 0x20138
+#define test_and_set_bit(val, addr) set_bit(val, addr)
+#endif
+#if defined(MODULE) && (LINUX_VERSION_CODE >= 0x20115)
+MODULE_AUTHOR("Donald Becker <becker@cesdis.gsfc.nasa.gov>");
+MODULE_DESCRIPTION("3Com 3c590/3c900 series Vortex/Boomerang driver");
+MODULE_PARM(debug, "i");
+MODULE_PARM(options, "1-" __MODULE_STRING(8) "i");
+MODULE_PARM(full_duplex, "1-" __MODULE_STRING(8) "i");
+MODULE_PARM(rx_copybreak, "i");
+MODULE_PARM(max_interrupt_work, "i");
+MODULE_PARM(compaq_ioaddr, "i");
+MODULE_PARM(compaq_irq, "i");
+MODULE_PARM(compaq_prod_id, "i");
+#endif
+
+/* Operational parameter that usually are not changed. */
+
+/* The Vortex size is twice that of the original EtherLinkIII series: the
+   runtime register window, window 1, is now always mapped in.
+   The Boomerang size is twice as large as the Vortex -- it has additional
+   bus master control registers. */
+#define VORTEX_TOTAL_SIZE 0x20
+#define BOOMERANG_TOTAL_SIZE 0x40
+
+#ifdef HAVE_DEVLIST
+struct netdev_entry tc59x_drv =
+{"Vortex", vortex_pci_probe, VORTEX_TOTAL_SIZE, NULL};
+#endif
+
+/* Set iff a MII transceiver on any interface requires mdio preamble.
+   This only set with the original DP83840 on older 3c905 boards, so the extra
+   code size of a per-interface flag is not worthwhile. */
+static char mii_preamble_required = 0;
+
+/* Caution!  These entries must be consistent. */
+static const int product_ids[] = {
+	0x5900, 0x5920, 0x5970, 0x5950, 0x5951, 0x5952, 0x9000, 0x9001,
+	0x9050, 0x9051, 0x9055,	0x5057, 0 };
+static const char *product_names[] = {
+	"3c590 Vortex 10Mbps",
+	"3c592 EISA 10mbps Demon/Vortex",
+	"3c597 EISA Fast Demon/Vortex",
+	"3c595 Vortex 100baseTX",
+	"3c595 Vortex 100baseT4",
+	"3c595 Vortex 100base-MII",
+	"3c900 Boomerang 10baseT",
+	"3c900 Boomerang 10Mbps/Combo",
+	"3c905 Boomerang 100baseTx",
+	"3c905 Boomerang 100baseT4",
+	"3c905B Cyclone 100baseTx",
+	"3c575",						/* Cardbus Boomerang */
+};
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the 3Com FastEtherLink and FastEtherLink
+XL, 3Com's PCI to 10/100baseT adapters.  It also works with the 10Mbs
+versions of the FastEtherLink cards.  The supported product IDs are
+  3c590, 3c592, 3c595, 3c597, 3c900, 3c905
+
+The ISA 3c515 is supported with a separate driver, 3c515.c, included with
+the kernel source or available from
+    cesdis.gsfc.nasa.gov:/pub/linux/drivers/3c515.html
+
+II. Board-specific settings
+
+PCI bus devices are configured by the system at boot time, so no jumpers
+need to be set on the board.  The system BIOS should be set to assign the
+PCI INTA signal to an otherwise unused system IRQ line.  While it's
+physically possible to shared PCI interrupt lines, the 1.2.0 kernel doesn't
+support it.
+
+III. Driver operation
+
+The 3c59x series use an interface that's very similar to the previous 3c5x9
+series.  The primary interface is two programmed-I/O FIFOs, with an
+alternate single-contiguous-region bus-master transfer (see next).
+
+The 3c900 "Boomerang" series uses a full-bus-master interface with separate
+lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet,
+DEC Tulip and Intel Speedo3.  The first chip version retains a compatible
+programmed-I/O interface that will be removed in the 'B' and subsequent
+revisions.
+
+One extension that is advertised in a very large font is that the adapters
+are capable of being bus masters.  On the Vortex chip this capability was
+only for a single contiguous region making it far less useful than the full
+bus master capability.  There is a significant performance impact of taking
+an extra interrupt or polling for the completion of each transfer, as well
+as difficulty sharing the single transfer engine between the transmit and
+receive threads.  Using DMA transfers is a win only with large blocks or
+with the flawed versions of the Intel Orion motherboard PCI controller.
+
+The Boomerang chip's full-bus-master interface is useful, and has the
+currently-unused advantages over other similar chips that queued transmit
+packets may be reordered and receive buffer groups are associated with a
+single frame.
+
+With full-bus-master support, this driver uses a "RX_COPYBREAK" scheme.
+Tather than a fixed intermediate receive buffer, this scheme allocates
+full-sized skbuffs as receive buffers.  The value RX_COPYBREAK is used as
+the copying breakpoint: it is chosen to trade-off the memory wasted by
+passing the full-sized skbuff to the queue layer for all frames vs. the
+copying cost of copying a frame to a correctly-sized skbuff.
+
+
+IIIC. Synchronization
+The driver runs as two independent, single-threaded flows of control.  One
+is the send-packet routine, which enforces single-threaded use by the
+dev->tbusy flag.  The other thread is the interrupt handler, which is single
+threaded by the hardware and other software.
+
+IV. Notes
+
+Thanks to Cameron Spitzer and Terry Murphy of 3Com for providing development
+3c590, 3c595, and 3c900 boards.
+The name "Vortex" is the internal 3Com project name for the PCI ASIC, and
+the EISA version is called "Demon".  According to Terry these names come
+from rides at the local amusement park.
+
+The new chips support both ethernet (1.5K) and FDDI (4.5K) packet sizes!
+This driver only supports ethernet packets because of the skbuff allocation
+limit of 4K.
+*/
+
+#define TCOM_VENDOR_ID	0x10B7		/* 3Com's manufacturer's ID. */
+
+/* Operational definitions.
+   These are not used by other compilation units and thus are not
+   exported in a ".h" file.
+
+   First the windows.  There are eight register windows, with the command
+   and status registers available in each.
+   */
+#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+
+/* The top five bits written to EL3_CMD are a command, the lower
+   11 bits are the parameter, if applicable.
+   Note that 11 parameters bits was fine for ethernet, but the new chip
+   can handle FDDI length frames (~4500 octets) and now parameters count
+   32-bit 'Dwords' rather than octets. */
+
+enum vortex_cmd {
+	TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
+	RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11,
+	UpStall = 6<<11, UpUnstall = (6<<11)+1,
+	DownStall = (6<<11)+2, DownUnstall = (6<<11)+3,
+	RxDiscard = 8<<11, TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
+	FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
+	SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
+	SetTxThreshold = 18<<11, SetTxStart = 19<<11,
+	StartDMAUp = 20<<11, StartDMADown = (20<<11)+1, StatsEnable = 21<<11,
+	StatsDisable = 22<<11, StopCoax = 23<<11,};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+	RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 };
+
+/* Bits in the general status register. */
+enum vortex_status {
+	IntLatch = 0x0001, HostError = 0x0002, TxComplete = 0x0004,
+	TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+	IntReq = 0x0040, StatsFull = 0x0080,
+	DMADone = 1<<8, DownComplete = 1<<9, UpComplete = 1<<10,
+	DMAInProgress = 1<<11,			/* DMA controller is still busy.*/
+	CmdInProgress = 1<<12,			/* EL3_CMD is still busy.*/
+};
+
+/* Register window 1 offsets, the window used in normal operation.
+   On the Vortex this window is always mapped at offsets 0x10-0x1f. */
+enum Window1 {
+	TX_FIFO = 0x10,  RX_FIFO = 0x10,  RxErrors = 0x14,
+	RxStatus = 0x18,  Timer=0x1A, TxStatus = 0x1B,
+	TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */
+};
+enum Window0 {
+	Wn0EepromCmd = 10,		/* Window 0: EEPROM command register. */
+	Wn0EepromData = 12,		/* Window 0: EEPROM results register. */
+	IntrStatus=0x0E,		/* Valid in all windows. */
+};
+enum Win0_EEPROM_bits {
+	EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0,
+	EEPROM_EWENB = 0x30,		/* Enable erasing/writing for 10 msec. */
+	EEPROM_EWDIS = 0x00,		/* Disable EWENB before 10 msec timeout. */
+};
+/* EEPROM locations. */
+enum eeprom_offset {
+	PhysAddr01=0, PhysAddr23=1, PhysAddr45=2, ModelID=3,
+	EtherLink3ID=7, IFXcvrIO=8, IRQLine=9,
+	NodeAddr01=10, NodeAddr23=11, NodeAddr45=12,
+	DriverTune=13, Checksum=15};
+
+enum Window3 {			/* Window 3: MAC/config bits. */
+	Wn3_Config=0, Wn3_MAC_Ctrl=6, Wn3_Options=8,
+};
+union wn3_config {
+	int i;
+	struct w3_config_fields {
+		unsigned int ram_size:3, ram_width:1, ram_speed:2, rom_size:2;
+		int pad8:8;
+		unsigned int ram_split:2, pad18:2, xcvr:4, autoselect:1;
+		int pad24:7;
+	} u;
+};
+
+enum Window4 {		/* Window 4: Xcvr/media bits. */
+	Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10,
+};
+enum Win4_Media_bits {
+	Media_SQE = 0x0008,		/* Enable SQE error counting for AUI. */
+	Media_10TP = 0x00C0,	/* Enable link beat and jabber for 10baseT. */
+	Media_Lnk = 0x0080,		/* Enable just link beat for 100TX/100FX. */
+	Media_LnkBeat = 0x0800,
+};
+enum Window7 {					/* Window 7: Bus Master control. */
+	Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12,
+};
+/* Boomerang bus master control registers. */
+enum MasterCtrl {
+	PktStatus = 0x20, DownListPtr = 0x24, FragAddr = 0x28, FragLen = 0x2c,
+	TxFreeThreshold = 0x2f, UpPktStatus = 0x30, UpListPtr = 0x38,
+};
+
+/* The Rx and Tx descriptor lists.
+   Caution Alpha hackers: these types are 32 bits!  Note also the 8 byte
+   alignment contraint on tx_ring[] and rx_ring[]. */
+#define LAST_FRAG  0x80000000			/* Last Addr/Len pair in descriptor. */
+struct boom_rx_desc {
+	u32 next;					/* Last entry points to 0.   */
+	s32 status;
+	u32 addr;					/* Up to 63 addr/len pairs possible. */
+	s32 length;					/* Set LAST_FRAG to indicate last pair. */
+};
+/* Values for the Rx status entry. */
+enum rx_desc_status {
+	RxDComplete=0x00008000, RxDError=0x4000,
+	/* See boomerang_rx() for actual error bits */
+	IPChksumErr=1<<25, TCPChksumErr=1<<26, UDPChksumErr=1<<27,
+	IPChksumValid=1<<29, TCPChksumValid=1<<30, UDPChksumValid=1<<31,
+};
+
+struct boom_tx_desc {
+	u32 next;					/* Last entry points to 0.   */
+	s32 status;					/* bits 0:12 length, others see below.  */
+	u32 addr;
+	s32 length;
+};
+
+/* Values for the Tx status entry. */
+enum tx_desc_status {
+	CRCDisable=0x2000, TxDComplete=0x8000,
+	AddIPChksum=0x02000000, AddTCPChksum=0x04000000, AddUDPChksum=0x08000000,
+	TxIntrUploaded=0x80000000,		/* IRQ when in FIFO, but maybe not sent. */
+};
+
+/* Chip features we care about in vp->capabilities, read from the EEPROM. */
+enum ChipCaps { CapBusMaster=0x20 };
+
+struct vortex_private {
+	char devname[8];			/* "ethN" string, also for kernel debug. */
+	const char *product_name;
+	struct device *next_module;
+	/* The Rx and Tx rings are here to keep them quad-word-aligned. */
+	struct boom_rx_desc rx_ring[RX_RING_SIZE];
+	struct boom_tx_desc tx_ring[TX_RING_SIZE];
+	/* The addresses of transmit- and receive-in-place skbuffs. */
+	struct sk_buff* rx_skbuff[RX_RING_SIZE];
+	struct sk_buff* tx_skbuff[TX_RING_SIZE];
+	unsigned int cur_rx, cur_tx;		/* The next free ring entry */
+	unsigned int dirty_rx, dirty_tx;	/* The ring entries to be free()ed. */
+	struct enet_statistics stats;
+	struct sk_buff *tx_skb;		/* Packet being eaten by bus master ctrl.  */
+
+	/* PCI configuration space information. */
+	u8 pci_bus, pci_dev_fn;		/* PCI bus location, for power management. */
+	u16 pci_device_id;
+
+	/* The remainder are related to chip state, mostly media selection. */
+	int in_interrupt;
+	struct timer_list timer;	/* Media selection timer. */
+	int options;				/* User-settable misc. driver options. */
+	unsigned int
+	  media_override:3, 			/* Passed-in media type. */
+	  default_media:3,				/* Read from the EEPROM/Wn3_Config. */
+	  full_duplex:1, autoselect:1,
+	  bus_master:1,				/* Vortex can only do a fragment bus-m. */
+	  full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang  */
+	  hw_csums:1,				/* Has hardware checksums. */
+      tx_full:1;
+	u16 status_enable;
+	u16 available_media;				/* From Wn3_Options. */
+	u16 capabilities, info1, info2;		/* Various, from EEPROM. */
+	u16 advertising;					/* NWay media advertisement */
+	unsigned char phys[2];				/* MII device addresses. */
+};
+
+/* The action to take with a media selection timer tick.
+   Note that we deviate from the 3Com order by checking 10base2 before AUI.
+ */
+enum xcvr_types {
+	XCVR_10baseT=0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx,
+	XCVR_100baseFx, XCVR_MII=6, XCVR_NWAY=8, XCVR_ExtMII=9, XCVR_Default=10,
+};
+
+static struct media_table {
+	char *name;
+	unsigned int media_bits:16,		/* Bits to set in Wn4_Media register. */
+		mask:8,				/* The transceiver-present bit in Wn3_Config.*/
+		next:8;				/* The media type to try next. */
+	int wait;			/* Time before we check media status. */
+} media_tbl[] = {
+  {	"10baseT",   Media_10TP,0x08, XCVR_10base2, (14*HZ)/10},
+  { "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1*HZ)/10},
+  { "undefined", 0,			0x80, XCVR_10baseT, 10000},
+  { "10base2",   0,			0x10, XCVR_AUI,		(1*HZ)/10},
+  { "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14*HZ)/10},
+  { "100baseFX", Media_Lnk, 0x04, XCVR_MII,		(14*HZ)/10},
+  { "MII",		 0,			0x41, XCVR_10baseT, 3*HZ },
+  { "undefined", 0,			0x01, XCVR_10baseT, 10000},
+  { "Autonegotiate", 0,		0x41, XCVR_10baseT, 3*HZ},
+  { "MII-External",	 0,		0x41, XCVR_10baseT, 3*HZ },
+  { "Default",	 0,			0xFF, XCVR_10baseT, 10000},
+};
+
+static int vortex_scan(struct device *dev);
+static struct device *vortex_found_device(struct device *dev, int ioaddr,
+										  int irq, int device_id,
+										  int options, int card_idx);
+static int vortex_probe1(struct device *dev);
+static int vortex_open(struct device *dev);
+static void mdio_sync(int ioaddr, int bits);
+static int mdio_read(int ioaddr, int phy_id, int location);
+#ifdef HAVE_PRIVATE_IOCTL
+static void mdio_write(int ioaddr, int phy_id, int location, int value);
+#endif
+static void vortex_timer(unsigned long arg);
+static int vortex_start_xmit(struct sk_buff *skb, struct device *dev);
+static int boomerang_start_xmit(struct sk_buff *skb, struct device *dev);
+static int vortex_rx(struct device *dev);
+static int boomerang_rx(struct device *dev);
+static void vortex_interrupt IRQ(int irq, void *dev_id, struct pt_regs *regs);
+static int vortex_close(struct device *dev);
+static void update_stats(int addr, struct device *dev);
+static struct enet_statistics *vortex_get_stats(struct device *dev);
+static void set_rx_mode(struct device *dev);
+#ifdef HAVE_PRIVATE_IOCTL
+static int vortex_ioctl(struct device *dev, struct ifreq *rq, int cmd);
+#endif
+#ifndef NEW_MULTICAST
+static void set_multicast_list(struct device *dev, int num_addrs, void *addrs);
+#endif
+
+
+/* Unlike the other PCI cards the 59x cards don't need a large contiguous
+   memory region, so making the driver a loadable module is feasible.
+
+   Unfortunately maximizing the shared code between the integrated and
+   module version of the driver results in a complicated set of initialization
+   procedures.
+   init_module() -- modules /  tc59x_init()  -- built-in
+		The wrappers for vortex_scan()
+   vortex_scan()  		 The common routine that scans for PCI and EISA cards
+   vortex_found_device() Allocate a device structure when we find a card.
+					Different versions exist for modules and built-in.
+   vortex_probe1()		Fill in the device structure -- this is separated
+					so that the modules code can put it in dev->init.
+*/
+/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
+/* Note: this is the only limit on the number of cards supported!! */
+static int options[8] = { -1, -1, -1, -1, -1, -1, -1, -1,};
+static int full_duplex[8] = {-1, -1, -1, -1, -1, -1, -1, -1};
+/* A list of all installed Vortex devices, for removing the driver module. */
+static struct device *root_vortex_dev = NULL;
+
+#ifdef MODULE
+/* Variables to work-around the Compaq PCI BIOS32 problem. */
+static int compaq_ioaddr = 0, compaq_irq = 0, compaq_device_id = 0x5900;
+
+static int debug = -1;
+
+#ifdef CARDBUS
+
+#include <pcmcia/driver_ops.h>
+
+static dev_node_t *vortex_attach(dev_locator_t *loc)
+{
+	u16 dev_id;
+	u32 io;
+	u8 bus, devfn, irq;
+	struct device *dev;
+
+	if (loc->bus != LOC_PCI) return NULL;
+	bus = loc->b.pci.bus; devfn = loc->b.pci.devfn;
+	printk(KERN_INFO "vortex_attach(bus %d, function %d)\n", bus, devfn);
+	pcibios_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0, &io);
+	pcibios_read_config_byte(bus, devfn, PCI_INTERRUPT_LINE, &irq);
+	pcibios_read_config_word(bus, devfn, PCI_DEVICE_ID, &dev_id);
+	io &= ~3;
+	dev = vortex_found_device(NULL, io, irq, dev_id, 0, -1);
+	if (dev) {
+		dev_node_t *node = kmalloc(sizeof(dev_node_t), GFP_KERNEL);
+		strcpy(node->dev_name, dev->name);
+		node->major = node->minor = 0;
+		node->next = NULL;
+		MOD_INC_USE_COUNT;
+		return node;
+	}
+	return NULL;
+}
+
+static void vortex_detach(dev_node_t *node)
+{
+	struct device **devp, **next;
+	printk(KERN_INFO "vortex_detach(%s)\n", node->dev_name);
+	for (devp = &root_vortex_dev; *devp; devp = next) {
+		next = &((struct vortex_private *)(*devp)->priv)->next_module;
+		if (strcmp((*devp)->name, node->dev_name) == 0) break;
+	}
+	if (*devp) {
+		struct device *dev = *devp;
+		if (dev->flags & IFF_UP)
+			vortex_close(dev);
+		dev->flags &= ~(IFF_UP|IFF_RUNNING);
+		unregister_netdev(dev);
+		kfree(dev);
+		*devp = *next;
+		kfree(node);
+		MOD_DEC_USE_COUNT;
+	}
+}
+
+struct driver_operations vortex_ops = {
+	"3c59x_cb", vortex_attach, NULL, NULL, vortex_detach
+};
+
+#endif  /* Cardbus support */
+
+
+int
+init_module(void)
+{
+	if (debug >= 0)
+		vortex_debug = debug;
+	if (vortex_debug)
+		printk(version);
+
+	root_vortex_dev = NULL;
+#ifdef CARDBUS
+	register_driver(&vortex_ops);
+	return 0;
+#else
+	{
+		int cards_found = vortex_scan(0);
+		if (cards_found == 0)
+			printk("No 3Com Vortex/Boomerang cards found.\n");
+		return cards_found ? 0 : -ENODEV;
+	}
+#endif
+}
+
+#else
+int tc59x_probe(struct device *dev)
+{
+	int cards_found = 0;
+
+	cards_found = vortex_scan(dev);
+
+	if (vortex_debug > 0  &&  cards_found)
+		printk(version);
+
+	return cards_found ? 0 : -ENODEV;
+}
+#endif  /* not MODULE */
+
+static int vortex_scan(struct device *dev)
+{
+	int cards_found = 0;
+
+	/* Allow an EISA-only driver. */
+#if defined(CONFIG_PCI) || (defined(MODULE) && !defined(NO_PCI))
+	/* Ideally we would detect all cards in slot order.  That would
+	   be best done a central PCI probe dispatch, which wouldn't work
+	   well with the current structure.  So instead we detect 3Com cards
+	   in slot order. */
+	if (pcibios_present()) {
+		static int pci_index = 0;
+		unsigned char pci_bus, pci_device_fn;
+
+		for (;pci_index < 0xff; pci_index++) {
+			u8 pci_latency;
+			u16 pci_command, new_command, vendor, device;
+			int irq;
+			long ioaddr;
+
+			if (pcibios_find_class (PCI_CLASS_NETWORK_ETHERNET << 8,
+									pci_index, &pci_bus, &pci_device_fn)
+				!= PCIBIOS_SUCCESSFUL)
+				break;
+			pcibios_read_config_word(pci_bus, pci_device_fn,
+									 PCI_VENDOR_ID, &vendor);
+			pcibios_read_config_word(pci_bus, pci_device_fn,
+									 PCI_DEVICE_ID, &device);
+			pcibios_read_config_word(pci_bus, pci_device_fn,
+									 PCI_COMMAND, &pci_command);
+			{
+#if LINUX_VERSION_CODE >= 0x20155
+				struct pci_dev *pdev = pci_find_slot(pci_bus, pci_device_fn);
+				ioaddr = pdev->base_address[0];
+				irq = pdev->irq;
+#else
+				u32 pci_ioaddr;
+				u8 pci_irq_line;
+				pcibios_read_config_byte(pci_bus, pci_device_fn,
+										 PCI_INTERRUPT_LINE, &pci_irq_line);
+				pcibios_read_config_dword(pci_bus, pci_device_fn,
+										  PCI_BASE_ADDRESS_0, &pci_ioaddr);
+				ioaddr = pci_ioaddr;
+				irq = pci_irq_line;
+#endif
+			}
+			/* Remove I/O space marker in bit 0. */
+			ioaddr &= ~3;
+
+			if (vendor != TCOM_VENDOR_ID)
+				continue;
+
+			if (ioaddr == 0) {
+				printk(KERN_WARNING "  A 3Com network adapter has been found, "
+					   "however it has not been assigned an I/O address.\n"
+					   "  You may need to power-cycle the machine for this "
+					   "device to work!\n");
+				continue;
+			}
+
+			if (check_region(ioaddr, VORTEX_TOTAL_SIZE))
+				continue;
+
+			/* Activate the card. */
+			new_command = pci_command | PCI_COMMAND_MASTER|PCI_COMMAND_IO;
+			if (pci_command != new_command) {
+				printk(KERN_INFO "  The PCI BIOS has not enabled this"
+					   " device!  Updating PCI command %4.4x->%4.4x.\n",
+					   pci_command, new_command);
+				pcibios_write_config_word(pci_bus, pci_device_fn,
+										  PCI_COMMAND, new_command);
+			}
+
+			dev = vortex_found_device(dev, ioaddr, irq,
+									  device, dev && dev->mem_start
+									  ? dev->mem_start : options[cards_found],
+									  cards_found);
+
+			if (dev) {
+				struct vortex_private *vp = (struct vortex_private *)dev->priv;
+				/* Get and check the latency values.  On the 3c590 series
+				   the latency timer must be set to the maximum value to avoid
+				   data corruption that occurs when the timer expires during
+				   a transfer -- a bug in the Vortex chip only. */
+				u8 new_latency = (device&0xff00) == 0x5900 ? 248 : 32;
+				vp->pci_bus = pci_bus;
+				vp->pci_dev_fn = pci_device_fn;
+				vp->pci_device_id = device;
+				
+				pcibios_read_config_byte(pci_bus, pci_device_fn,
+										 PCI_LATENCY_TIMER, &pci_latency);
+				if (pci_latency < new_latency) {
+					printk(KERN_INFO "%s: Overriding PCI latency"
+						   " timer (CFLT) setting of %d, new value is %d.\n",
+						   dev->name, pci_latency, new_latency);
+					pcibios_write_config_byte(pci_bus, pci_device_fn,
+											  PCI_LATENCY_TIMER, new_latency);
+				}
+				dev = 0;
+				cards_found++;
+			}
+		}
+	}
+#endif /* NO_PCI */
+
+	/* Now check all slots of the EISA bus. */
+	if (EISA_bus) {
+		static int ioaddr = 0x1000;
+		for ( ; ioaddr < 0x9000; ioaddr += 0x1000) {
+			int device_id;
+			if (check_region(ioaddr, VORTEX_TOTAL_SIZE))
+				continue;
+			/* Check the standard EISA ID register for an encoded '3Com'. */
+			if (inw(ioaddr + 0xC80) != 0x6d50)
+				continue;
+			/* Check for a product that we support, 3c59{2,7} any rev. */
+			device_id = (inb(ioaddr + 0xC82)<<8) + inb(ioaddr + 0xC83);
+			if ((device_id & 0xFF00) != 0x5900)
+				continue;
+			vortex_found_device(dev, ioaddr, inw(ioaddr + 0xC88) >> 12,
+								device_id,  dev && dev->mem_start
+								? dev->mem_start : options[cards_found],
+								cards_found);
+			dev = 0;
+			cards_found++;
+		}
+	}
+
+#ifdef MODULE
+	/* Special code to work-around the Compaq PCI BIOS32 problem. */
+	if (compaq_ioaddr) {
+		vortex_found_device(dev, compaq_ioaddr, compaq_irq, compaq_device_id,
+							dev && dev->mem_start ? dev->mem_start
+							: options[cards_found], cards_found);
+		cards_found++;
+		dev = 0;
+	}
+#endif
+
+	/* 3c515 cards are now supported by the 3c515.c driver. */
+
+	return cards_found;
+}
+
+static struct device *
+vortex_found_device(struct device *dev, int ioaddr, int irq,
+					int device_id, int option, int card_idx)
+{
+	struct vortex_private *vp;
+	const char *product_name;
+	int board_index = 0;
+
+	for (board_index = 0; product_ids[board_index]; board_index++) {
+		if (device_id == product_ids[board_index])
+			break;
+	}
+	/* Handle products we don't recognize, but might still work with. */
+	if (product_ids[board_index])
+		product_name = product_names[board_index];
+	else if ((device_id & 0xff00) == 0x5900)
+		product_name = "3c590 Vortex";
+	else if ((device_id & 0xfff0) == 0x9000)
+		product_name = "3c900";
+	else if ((device_id & 0xfff0) == 0x9050)
+		product_name = "3c905";
+	else {
+		printk(KERN_WARNING "Unknown 3Com PCI ethernet adapter type %4.4x detected:"
+			   " not configured.\n", device_id);
+		return 0;
+	}
+
+#ifdef MODULE
+	/* Allocate and fill new device structure. */
+	{
+		int dev_size = sizeof(struct device) +
+			sizeof(struct vortex_private) + 15;		/* Pad for alignment */
+
+		dev = (struct device *) kmalloc(dev_size, GFP_KERNEL);
+		memset(dev, 0, dev_size);
+	}
+	/* Align the Rx and Tx ring entries.  */
+	dev->priv = (void *)(((long)dev + sizeof(struct device) + 15) & ~15);
+	vp = (struct vortex_private *)dev->priv;
+	dev->name = vp->devname; /* An empty string. */
+	dev->base_addr = ioaddr;
+	dev->irq = irq;
+	dev->init = vortex_probe1;
+	vp->product_name = product_name;
+	vp->options = option;
+	if (card_idx >= 0) {
+		if (full_duplex[card_idx] >= 0)
+			vp->full_duplex = full_duplex[card_idx];
+	} else
+		vp->full_duplex = (option > 0 && (option & 0x10) ? 1 : 0);
+
+	if (option > 0) {
+		vp->media_override = ((option & 7) == XCVR_10baseTOnly) ?
+			XCVR_10baseT  :  option & 7;
+		vp->bus_master = (option & 16) ? 1 : 0;
+	} else {
+		vp->media_override = 7;
+		vp->bus_master = 0;
+	}
+	ether_setup(dev);
+	vp->next_module = root_vortex_dev;
+	root_vortex_dev = dev;
+	if (register_netdev(dev) != 0)
+		return 0;
+#else  /* not a MODULE */
+	if (dev) {
+		/* Caution: quad-word alignment required for rings! */
+		dev->priv = kmalloc(sizeof (struct vortex_private), GFP_KERNEL);
+		memset(dev->priv, 0, sizeof (struct vortex_private));
+	}
+	dev = init_etherdev(dev, sizeof(struct vortex_private));
+	dev->base_addr = ioaddr;
+	dev->irq = irq;
+	dev->mtu = mtu;
+
+	vp  = (struct vortex_private *)dev->priv;
+	vp->product_name = product_name;
+	vp->options = option;
+	if (option >= 0) {
+		vp->media_override = ((option & 7) == 2)  ?  0  :  option & 7;
+		vp->full_duplex = (option & 8) ? 1 : 0;
+		vp->bus_master = (option & 16) ? 1 : 0;
+	} else {
+		vp->media_override = 7;
+		vp->full_duplex = 0;
+		vp->bus_master = 0;
+	}
+
+	vortex_probe1(dev);
+#endif /* MODULE */
+	return dev;
+}
+
+static int vortex_probe1(struct device *dev)
+{
+	int ioaddr = dev->base_addr;
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+	u16 *ether_addr = (u16 *)dev->dev_addr;
+	unsigned int eeprom[0x40], checksum = 0;		/* EEPROM contents */
+	int i;
+
+	printk(KERN_INFO "%s: 3Com %s at %#3x,",
+		   dev->name, vp->product_name, ioaddr);
+
+	/* Read the station address from the EEPROM. */
+	EL3WINDOW(0);
+	for (i = 0; i < 0x40; i++) {
+		int timer;
+#ifdef CARDBUS
+		outw(0x230 + i, ioaddr + Wn0EepromCmd);
+#else
+		outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd);
+#endif
+		/* Pause for at least 162 us. for the read to take place. */
+		for (timer = 10; timer >= 0; timer--) {
+			udelay(162);
+			if ((inw(ioaddr + Wn0EepromCmd) & 0x8000) == 0)
+				break;
+		}
+		eeprom[i] = inw(ioaddr + Wn0EepromData);
+	}
+	for (i = 0; i < 0x18; i++)
+		checksum ^= eeprom[i];
+	checksum = (checksum ^ (checksum >> 8)) & 0xff;
+	if (checksum != 0x00) {		/* Grrr, needless incompatible change 3Com. */
+		while (i < 0x21)
+			checksum ^= eeprom[i++];
+		checksum = (checksum ^ (checksum >> 8)) & 0xff;
+	}
+	if (checksum != 0x00)
+		printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+
+	for (i = 0; i < 3; i++)
+		ether_addr[i] = htons(eeprom[i + 10]);
+	for (i = 0; i < 6; i++)
+		printk("%c%2.2x", i ? ':' : ' ', dev->dev_addr[i]);
+	printk(", IRQ %d\n", dev->irq);
+	/* Tell them about an invalid IRQ. */
+	if (vortex_debug && (dev->irq <= 0 || dev->irq >= NR_IRQS))
+		printk(KERN_WARNING " *** Warning: IRQ %d is unlikely to work! ***\n",
+			   dev->irq);
+
+	/* Extract our information from the EEPROM data. */
+	vp->info1 = eeprom[13];
+	vp->info2 = eeprom[15];
+	vp->capabilities = eeprom[16];
+
+	if (vp->info1 & 0x8000)
+		vp->full_duplex = 1;
+
+	{
+		char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+		union wn3_config config;
+		EL3WINDOW(3);
+		vp->available_media = inw(ioaddr + Wn3_Options);
+		if ((vp->available_media & 0xff) == 0)		/* Broken 3c916 */
+			vp->available_media = 0x40;
+		config.i = inl(ioaddr + Wn3_Config);
+		if (vortex_debug > 1)
+			printk(KERN_DEBUG "  Internal config register is %4.4x, "
+				   "transceivers %#x.\n", config.i, inw(ioaddr + Wn3_Options));
+		printk(KERN_INFO "  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+			   8 << config.u.ram_size,
+			   config.u.ram_width ? "word" : "byte",
+			   ram_split[config.u.ram_split],
+			   config.u.autoselect ? "autoselect/" : "",
+			   config.u.xcvr ? "NWay Autonegotiation" :
+			   media_tbl[config.u.xcvr].name);
+		vp->default_media = config.u.xcvr;
+		vp->autoselect = config.u.autoselect;
+	}
+
+	if (vp->media_override != 7) {
+		printk(KERN_INFO "  Media override to transceiver type %d (%s).\n",
+			   vp->media_override, media_tbl[vp->media_override].name);
+		dev->if_port = vp->media_override;
+	} else
+		dev->if_port = vp->default_media;
+
+	if (dev->if_port == XCVR_MII) {
+		int phy, phy_idx = 0;
+		EL3WINDOW(4);
+		for (phy = 0; phy < 32 && phy_idx < sizeof(vp->phys); phy++) {
+			int mii_status;
+			mdio_sync(ioaddr, 32);
+			mii_status = mdio_read(ioaddr, phy, 1);
+			if (mii_status  &&  mii_status != 0xffff) {
+				vp->phys[phy_idx++] = phy;
+				printk(KERN_INFO "  MII transceiver found at address %d, status %4x.\n",
+					   phy, mii_status);
+				mdio_sync(ioaddr, 32);
+				if ((mdio_read(ioaddr, phy, 1) & 0x0040) == 0)
+					mii_preamble_required = 1;
+			}
+		}
+		if (phy_idx == 0) {
+			printk(KERN_WARNING"  ***WARNING*** No MII transceivers found!\n");
+			vp->phys[0] = 24;
+		} else {
+			vp->advertising = mdio_read(ioaddr, vp->phys[0], 4);
+			if (vp->full_duplex) {
+				/* Only advertise the FD media types. */
+				vp->advertising &= 0x015F;
+				mdio_write(ioaddr, vp->phys[0], 4, vp->advertising);
+			}
+		}
+	}
+
+	if (vp->capabilities & CapBusMaster) {
+		vp->full_bus_master_tx = 1;
+		printk(KERN_INFO"  Enabling bus-master transmits and %s receives.\n",
+			   (vp->info2 & 1) ? "early" : "whole-frame" );
+		vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2;
+	}
+
+	/* We do a request_region() to register /proc/ioports info. */
+	request_region(ioaddr, VORTEX_TOTAL_SIZE, vp->product_name);
+
+	/* The 3c59x-specific entries in the device structure. */
+	dev->open = &vortex_open;
+	dev->hard_start_xmit = &vortex_start_xmit;
+	dev->stop = &vortex_close;
+	dev->get_stats = &vortex_get_stats;
+#ifdef HAVE_PRIVATE_IOCTL
+	dev->do_ioctl = &vortex_ioctl;
+#endif
+#ifdef NEW_MULTICAST
+	dev->set_multicast_list = &set_rx_mode;
+#else
+	dev->set_multicast_list = &set_multicast_list;
+#endif
+
+	return 0;
+}
+
+
+static int
+vortex_open(struct device *dev)
+{
+	int ioaddr = dev->base_addr;
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+	union wn3_config config;
+	int i;
+
+	/* Before initializing select the active media port. */
+	EL3WINDOW(3);
+	config.i = inl(ioaddr + Wn3_Config);
+
+	if (vp->media_override != 7) {
+		if (vortex_debug > 1)
+			printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n",
+				   dev->name, vp->media_override,
+				   media_tbl[vp->media_override].name);
+		dev->if_port = vp->media_override;
+	} else if (vp->autoselect) {
+		/* Find first available media type, starting with 100baseTx. */
+		dev->if_port = XCVR_100baseTx;
+		while (! (vp->available_media & media_tbl[dev->if_port].mask))
+			dev->if_port = media_tbl[dev->if_port].next;
+
+		if (vortex_debug > 1)
+			printk(KERN_DEBUG "%s: Initial media type %s.\n",
+				   dev->name, media_tbl[dev->if_port].name);
+
+		init_timer(&vp->timer);
+		vp->timer.expires = RUN_AT(media_tbl[dev->if_port].wait);
+		vp->timer.data = (unsigned long)dev;
+		vp->timer.function = &vortex_timer;    /* timer handler */
+		add_timer(&vp->timer);
+	} else
+		dev->if_port = vp->default_media;
+
+	config.u.xcvr = dev->if_port;
+	outl(config.i, ioaddr + Wn3_Config);
+
+	if (dev->if_port == XCVR_MII) {
+		int mii_reg1, mii_reg5;
+		EL3WINDOW(4);
+		/* Read BMSR (reg1) only to clear old status. */
+		mii_reg1 = mdio_read(ioaddr, vp->phys[0], 1);
+		mii_reg5 = mdio_read(ioaddr, vp->phys[0], 5);
+		if (mii_reg5 == 0xffff  ||  mii_reg5 == 0x0000)
+			;					/* No MII device or no link partner report */
+		else if ((mii_reg5 & 0x0100) != 0	/* 100baseTx-FD */
+				 || (mii_reg5 & 0x00C0) == 0x0040) /* 10T-FD, but not 100-HD */
+			vp->full_duplex = 1;
+		if (vortex_debug > 1)
+			printk(KERN_INFO "%s: MII #%d status %4.4x, link partner capability %4.4x,"
+				   " setting %s-duplex.\n", dev->name, vp->phys[0],
+				   mii_reg1, mii_reg5, vp->full_duplex ? "full" : "half");
+		EL3WINDOW(3);
+	}
+
+	/* Set the full-duplex bit. */
+	outb(((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
+		 (dev->mtu > 1500 ? 0x40 : 0), ioaddr + Wn3_MAC_Ctrl);
+
+	if (vortex_debug > 1) {
+		printk(KERN_DEBUG "%s: vortex_open() InternalConfig %8.8x.\n",
+			dev->name, config.i);
+	}
+
+	outw(TxReset, ioaddr + EL3_CMD);
+	for (i = 2000; i >= 0 ; i--)
+		if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+			break;
+
+	outw(RxReset, ioaddr + EL3_CMD);
+	/* Wait a few ticks for the RxReset command to complete. */
+	for (i = 2000; i >= 0 ; i--)
+		if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+			break;
+
+	outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+
+#ifdef SA_SHIRQ
+	/* Use the now-standard shared IRQ implementation. */
+	if (request_irq(dev->irq, &vortex_interrupt, SA_SHIRQ, dev->name, dev)) {
+		return -EAGAIN;
+	}
+#else
+	if (dev->irq == 0  ||  irq2dev_map[dev->irq] != NULL)
+		return -EAGAIN;
+	irq2dev_map[dev->irq] = dev;
+	if (request_irq(dev->irq, &vortex_interrupt, 0, vp->product_name)) {
+		irq2dev_map[dev->irq] = NULL;
+		return -EAGAIN;
+	}
+#endif
+
+	if (vortex_debug > 1) {
+		EL3WINDOW(4);
+		printk(KERN_DEBUG "%s: vortex_open() irq %d media status %4.4x.\n",
+			   dev->name, dev->irq, inw(ioaddr + Wn4_Media));
+	}
+
+	/* Set the station address and mask in window 2 each time opened. */
+	EL3WINDOW(2);
+	for (i = 0; i < 6; i++)
+		outb(dev->dev_addr[i], ioaddr + i);
+	for (; i < 12; i+=2)
+		outw(0, ioaddr + i);
+
+	if (dev->if_port == XCVR_10base2)
+		/* Start the thinnet transceiver. We should really wait 50ms...*/
+		outw(StartCoax, ioaddr + EL3_CMD);
+	EL3WINDOW(4);
+	outw((inw(ioaddr + Wn4_Media) & ~(Media_10TP|Media_SQE)) |
+		 media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media);
+
+	/* Switch to the stats window, and clear all stats by reading. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+	EL3WINDOW(6);
+	for (i = 0; i < 10; i++)
+		inb(ioaddr + i);
+	inw(ioaddr + 10);
+	inw(ioaddr + 12);
+	/* New: On the Vortex we must also clear the BadSSD counter. */
+	EL3WINDOW(4);
+	inb(ioaddr + 12);
+	/* ..and on the Boomerang we enable the extra statistics bits. */
+	outw(0x0040, ioaddr + Wn4_NetDiag);
+
+	/* Switch to register set 7 for normal use. */
+	EL3WINDOW(7);
+
+	if (vp->full_bus_master_rx) { /* Boomerang bus master. */
+		vp->cur_rx = vp->dirty_rx = 0;
+		/* Initialize the RxEarly register as recommended. */
+		outw(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD);
+		outl(0x0020, ioaddr + PktStatus);
+		if (vortex_debug > 2)
+			printk(KERN_DEBUG "%s:  Filling in the Rx ring.\n", dev->name);
+		for (i = 0; i < RX_RING_SIZE; i++) {
+			struct sk_buff *skb;
+			vp->rx_ring[i].next = virt_to_bus(&vp->rx_ring[i+1]);
+			vp->rx_ring[i].status = 0;	/* Clear complete bit. */
+			vp->rx_ring[i].length = PKT_BUF_SZ | LAST_FRAG;
+			skb = DEV_ALLOC_SKB(PKT_BUF_SZ);
+			vp->rx_skbuff[i] = skb;
+			if (skb == NULL)
+				break;			/* Bad news!  */
+			skb->dev = dev;			/* Mark as being used by this device. */
+#if LINUX_VERSION_CODE >= 0x10300
+			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+			vp->rx_ring[i].addr = virt_to_bus(skb->tail);
+#else
+			vp->rx_ring[i].addr = virt_to_bus(skb->data);
+#endif
+		}
+		vp->rx_ring[i-1].next = virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */
+		outl(virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr);
+	}
+	if (vp->full_bus_master_tx) { 		/* Boomerang bus master Tx. */
+		dev->hard_start_xmit = &boomerang_start_xmit;
+		vp->cur_tx = vp->dirty_tx = 0;
+		outb(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */
+		/* Clear the Tx ring. */
+		for (i = 0; i < TX_RING_SIZE; i++)
+			vp->tx_skbuff[i] = 0;
+		outl(0, ioaddr + DownListPtr);
+	}
+	/* Set reciever mode: presumably accept b-case and phys addr only. */
+	set_rx_mode(dev);
+	outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+
+	vp->in_interrupt = 0;
+	dev->tbusy = 0;
+	dev->interrupt = 0;
+	dev->start = 1;
+
+	outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+	outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+	/* Allow status bits to be seen. */
+	vp->status_enable = SetStatusEnb | HostError|IntReq|StatsFull|TxComplete|
+		(vp->full_bus_master_tx ? DownComplete : TxAvailable) |
+		(vp->full_bus_master_rx ? UpComplete : RxComplete) |
+		(vp->bus_master ? DMADone : 0);
+	outw(vp->status_enable, ioaddr + EL3_CMD);
+	/* Ack all pending events, and set active indicator mask. */
+	outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+		 ioaddr + EL3_CMD);
+	outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
+		 | HostError | TxComplete
+		 | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete,
+			ioaddr + EL3_CMD);
+
+	MOD_INC_USE_COUNT;
+
+	return 0;
+}
+
+static void vortex_timer(unsigned long data)
+{
+#ifdef AUTOMEDIA
+	struct device *dev = (struct device *)data;
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	unsigned long flags;
+	int ok = 0;
+
+	if (vortex_debug > 1)
+		printk(KERN_DEBUG "%s: Media selection timer tick happened, %s.\n",
+			   dev->name, media_tbl[dev->if_port].name);
+
+	save_flags(flags);	cli(); {
+	  int old_window = inw(ioaddr + EL3_CMD) >> 13;
+	  int media_status;
+	  EL3WINDOW(4);
+	  media_status = inw(ioaddr + Wn4_Media);
+	  switch (dev->if_port) {
+	  case XCVR_10baseT:  case XCVR_100baseTx:  case XCVR_100baseFx:
+		if (media_status & Media_LnkBeat) {
+		  ok = 1;
+		  if (vortex_debug > 1)
+			printk(KERN_DEBUG "%s: Media %s has link beat, %x.\n",
+				   dev->name, media_tbl[dev->if_port].name, media_status);
+		} else if (vortex_debug > 1)
+		  printk(KERN_DEBUG "%s: Media %s is has no link beat, %x.\n",
+				   dev->name, media_tbl[dev->if_port].name, media_status);
+
+		break;
+	  case XCVR_MII:
+		  {
+			  int mii_reg1 = mdio_read(ioaddr, vp->phys[0], 1);
+			  int mii_reg5 = mdio_read(ioaddr, vp->phys[0], 5);
+			  if (vortex_debug > 1)
+				  printk(KERN_DEBUG "%s: MII #%d status register is %4.4x, "
+						 "link partner capability %4.4x.\n",
+						 dev->name, vp->phys[0], mii_reg1, mii_reg5);
+			  if (mii_reg1 & 0x0004)
+				  ok = 1;
+			  break;
+		  }
+	  default:					/* Other media types handled by Tx timeouts. */
+		if (vortex_debug > 1)
+		  printk(KERN_DEBUG "%s: Media %s is has no indication, %x.\n",
+				 dev->name, media_tbl[dev->if_port].name, media_status);
+		ok = 1;
+	  }
+	  if ( ! ok) {
+		union wn3_config config;
+
+		do {
+			dev->if_port = media_tbl[dev->if_port].next;
+		} while ( ! (vp->available_media & media_tbl[dev->if_port].mask));
+		if (dev->if_port == XCVR_Default) { /* Go back to default. */
+		  dev->if_port = vp->default_media;
+		  if (vortex_debug > 1)
+			printk(KERN_DEBUG "%s: Media selection failing, using default "
+				   "%s port.\n",
+				   dev->name, media_tbl[dev->if_port].name);
+		} else {
+		  if (vortex_debug > 1)
+			printk(KERN_DEBUG "%s: Media selection failed, now trying "
+				   "%s port.\n",
+				   dev->name, media_tbl[dev->if_port].name);
+		  vp->timer.expires = RUN_AT(media_tbl[dev->if_port].wait);
+		  add_timer(&vp->timer);
+		}
+		outw((media_status & ~(Media_10TP|Media_SQE)) |
+			 media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media);
+
+		EL3WINDOW(3);
+		config.i = inl(ioaddr + Wn3_Config);
+		config.u.xcvr = dev->if_port;
+		outl(config.i, ioaddr + Wn3_Config);
+
+		outw(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax,
+			 ioaddr + EL3_CMD);
+	  }
+	  EL3WINDOW(old_window);
+	}   restore_flags(flags);
+	if (vortex_debug > 1)
+	  printk(KERN_DEBUG "%s: Media selection timer finished, %s.\n",
+			 dev->name, media_tbl[dev->if_port].name);
+
+#endif /* AUTOMEDIA*/
+	return;
+}
+
+static void vortex_tx_timeout(struct device *dev)
+{
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	int j;
+
+	printk(KERN_ERR "%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+		   dev->name, inb(ioaddr + TxStatus),
+		   inw(ioaddr + EL3_STATUS));
+	/* Slight code bloat to be user friendly. */
+	if ((inb(ioaddr + TxStatus) & 0x88) == 0x88)
+		printk(KERN_ERR "%s: Transmitter encountered 16 collisions --"
+			   " network cable problem?\n", dev->name);
+	if (inw(ioaddr + EL3_STATUS) & IntLatch) {
+		printk(KERN_ERR "%s: Interrupt posted but not delivered --"
+			   " IRQ blocked by another device?\n", dev->name);
+		/* Bad idea here.. but we might as well handle a few events. */
+		vortex_interrupt IRQ(dev->irq, dev, 0);
+	}
+	outw(TxReset, ioaddr + EL3_CMD);
+	for (j = 200; j >= 0 ; j--)
+		if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+			break;
+
+#if ! defined(final_version) && LINUX_VERSION_CODE >= 0x10300
+	if (vp->full_bus_master_tx) {
+		int i;
+		printk(KERN_DEBUG "  Flags; bus-master %d, full %d; dirty %d "
+			   "current %d.\n",
+			   vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx, vp->cur_tx);
+		printk(KERN_DEBUG "  Transmit list %8.8x vs. %p.\n",
+			   inl(ioaddr + DownListPtr),
+			   &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
+		for (i = 0; i < TX_RING_SIZE; i++) {
+			printk(KERN_DEBUG "  %d: @%p  length %8.8x status %8.8x\n", i,
+				   &vp->tx_ring[i],
+				   vp->tx_ring[i].length,
+				   vp->tx_ring[i].status);
+		}
+	}
+#endif
+	vp->stats.tx_errors++;
+	if (vp->full_bus_master_tx) {
+		if (vortex_debug > 0)
+			printk(KERN_DEBUG "%s: Resetting the Tx ring pointer.\n",
+				   dev->name);
+		if (vp->cur_tx - vp->dirty_tx > 0  &&  inl(ioaddr + DownListPtr) == 0)
+			outl(virt_to_bus(&vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]),
+				 ioaddr + DownListPtr);
+		if (vp->tx_full && (vp->cur_tx - vp->dirty_tx <= TX_RING_SIZE - 1)) {
+			vp->tx_full = 0;
+			clear_bit(0, (void*)&dev->tbusy);
+		}
+		outb(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold);
+		outw(DownUnstall, ioaddr + EL3_CMD);
+	} else
+		vp->stats.tx_dropped++;
+	
+	/* Issue Tx Enable */
+	outw(TxEnable, ioaddr + EL3_CMD);
+	dev->trans_start = jiffies;
+	
+	/* Switch to register set 7 for normal use. */
+	EL3WINDOW(7);
+}
+
+/*
+ * Handle uncommon interrupt sources.  This is a separate routine to minimize
+ * the cache impact.
+ */
+static void
+vortex_error(struct device *dev, int status)
+{
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	int do_tx_reset = 0;
+	int i;
+
+	if (status & TxComplete) {			/* Really "TxError" for us. */
+		unsigned char tx_status = inb(ioaddr + TxStatus);
+		/* Presumably a tx-timeout. We must merely re-enable. */
+		if (vortex_debug > 2
+			|| (tx_status != 0x88 && vortex_debug > 0))
+			printk(KERN_DEBUG"%s: Transmit error, Tx status register %2.2x.\n",
+				   dev->name, tx_status);
+		if (tx_status & 0x14)  vp->stats.tx_fifo_errors++;
+		if (tx_status & 0x38)  vp->stats.tx_aborted_errors++;
+		outb(0, ioaddr + TxStatus);
+		if (tx_status & 0x30)
+			do_tx_reset = 1;
+		else					/* Merely re-enable the transmitter. */
+			outw(TxEnable, ioaddr + EL3_CMD);
+	}
+	if (status & RxEarly) {				/* Rx early is unused. */
+		vortex_rx(dev);
+		outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+	}
+	if (status & StatsFull) {			/* Empty statistics. */
+		static int DoneDidThat = 0;
+		if (vortex_debug > 4)
+			printk(KERN_DEBUG "%s: Updating stats.\n", dev->name);
+		update_stats(ioaddr, dev);
+		/* HACK: Disable statistics as an interrupt source. */
+		/* This occurs when we have the wrong media type! */
+		if (DoneDidThat == 0  &&
+			inw(ioaddr + EL3_STATUS) & StatsFull) {
+			printk(KERN_WARNING "%s: Updating statistics failed, disabling "
+				   "stats as an interrupt source.\n", dev->name);
+			EL3WINDOW(5);
+			outw(SetIntrEnb | (inw(ioaddr + 10) & ~StatsFull), ioaddr + EL3_CMD);
+			EL3WINDOW(7);
+			DoneDidThat++;
+		}
+	}
+	if (status & IntReq)		/* Restore all interrupt sources.  */
+		outw(ioaddr + EL3_CMD, vp->status_enable);
+	if (status & HostError) {
+		u16 fifo_diag;
+		EL3WINDOW(4);
+		fifo_diag = inw(ioaddr + Wn4_FIFODiag);
+		if (vortex_debug > 0)
+			printk(KERN_ERR "%s: Host error, FIFO diagnostic register %4.4x.\n",
+				   dev->name, fifo_diag);
+		/* Adapter failure requires Tx/Rx reset and reinit. */
+		if (vp->full_bus_master_tx) {
+			outw(TotalReset | 0xff, ioaddr + EL3_CMD);
+			for (i = 2000; i >= 0 ; i--)
+				if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+					break;
+			/* Re-enable the receiver. */
+			outw(RxEnable, ioaddr + EL3_CMD);
+			outw(TxEnable, ioaddr + EL3_CMD);
+		} else if (fifo_diag & 0x0400)
+			do_tx_reset = 1;
+		if (fifo_diag & 0x3000) {
+			outw(RxReset, ioaddr + EL3_CMD);
+			for (i = 2000; i >= 0 ; i--)
+				if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+					break;
+			/* Set the Rx filter to the current state. */
+			set_rx_mode(dev);
+			outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
+			outw(AckIntr | HostError, ioaddr + EL3_CMD);
+		}
+	}
+	if (do_tx_reset) {
+		int j;
+		outw(TxReset, ioaddr + EL3_CMD);
+		for (j = 200; j >= 0 ; j--)
+			if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+				break;
+		outw(TxEnable, ioaddr + EL3_CMD);
+	}
+
+}
+
+
+static int
+vortex_start_xmit(struct sk_buff *skb, struct device *dev)
+{
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+
+	if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) {
+		if (jiffies - dev->trans_start >= TX_TIMEOUT)
+			vortex_tx_timeout(dev);
+		return 1;
+	}
+
+	/* Put out the doubleword header... */
+	outl(skb->len, ioaddr + TX_FIFO);
+#ifdef VORTEX_BUS_MASTER
+	if (vp->bus_master) {
+		/* Set the bus-master controller to transfer the packet. */
+		outl(virt_to_bus(skb->data), ioaddr + Wn7_MasterAddr);
+		outw((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
+		vp->tx_skb = skb;
+		outw(StartDMADown, ioaddr + EL3_CMD);
+		/* dev->tbusy will be cleared at the DMADone interrupt. */
+	} else {
+		/* ... and the packet rounded to a doubleword. */
+		outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+		DEV_FREE_SKB(skb);
+		if (inw(ioaddr + TxFree) > 1536) {
+			clear_bit(0, (void*)&dev->tbusy);
+		} else
+			/* Interrupt us when the FIFO has room for max-sized packet. */
+			outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+	}
+#else
+	/* ... and the packet rounded to a doubleword. */
+	outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+	DEV_FREE_SKB(skb);
+	if (inw(ioaddr + TxFree) > 1536) {
+		clear_bit(0, (void*)&dev->tbusy);
+	} else
+		/* Interrupt us when the FIFO has room for max-sized packet. */
+		outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+#endif  /* bus master */
+
+	dev->trans_start = jiffies;
+
+	/* Clear the Tx status stack. */
+	{
+		int tx_status;
+		int i = 32;
+
+		while (--i > 0	&&	(tx_status = inb(ioaddr + TxStatus)) > 0) {
+			if (tx_status & 0x3C) {		/* A Tx-disabling error occurred.  */
+				if (vortex_debug > 2)
+				  printk(KERN_DEBUG "%s: Tx error, status %2.2x.\n",
+						 dev->name, tx_status);
+				if (tx_status & 0x04) vp->stats.tx_fifo_errors++;
+				if (tx_status & 0x38) vp->stats.tx_aborted_errors++;
+				if (tx_status & 0x30) {
+					int j;
+					outw(TxReset, ioaddr + EL3_CMD);
+					for (j = 200; j >= 0 ; j--)
+						if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+							break;
+				}
+				outw(TxEnable, ioaddr + EL3_CMD);
+			}
+			outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */
+		}
+	}
+	return 0;
+}
+
+static int
+boomerang_start_xmit(struct sk_buff *skb, struct device *dev)
+{
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+
+	if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) {
+		if (jiffies - dev->trans_start >= TX_TIMEOUT)
+			vortex_tx_timeout(dev);
+		return 1;
+	} else {
+		/* Calculate the next Tx descriptor entry. */
+		int entry = vp->cur_tx % TX_RING_SIZE;
+		struct boom_tx_desc *prev_entry =
+			&vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE];
+		unsigned long flags;
+		int i;
+
+		if (vortex_debug > 3)
+			printk(KERN_DEBUG "%s: Trying to send a packet, Tx index %d.\n",
+				   dev->name, vp->cur_tx);
+		if (vp->tx_full) {
+			if (vortex_debug >0)
+				printk(KERN_WARNING "%s: Tx Ring full, refusing to send buffer.\n",
+					   dev->name);
+			return 1;
+		} 
+		/* end change 06/25/97 M. Sievers */	
+		vp->tx_skbuff[entry] = skb;
+		vp->tx_ring[entry].next = 0;
+		vp->tx_ring[entry].addr = virt_to_bus(skb->data);
+		vp->tx_ring[entry].length = skb->len | LAST_FRAG;
+		vp->tx_ring[entry].status = skb->len | TxIntrUploaded;
+
+		save_flags(flags);
+		cli();
+		outw(DownStall, ioaddr + EL3_CMD);
+		/* Wait for the stall to complete. */
+		for (i = 600; i >= 0 ; i--)
+			if ( (inw(ioaddr + EL3_STATUS) & CmdInProgress) == 0)
+				break;
+		prev_entry->next = virt_to_bus(&vp->tx_ring[entry]);
+		if (inl(ioaddr + DownListPtr) == 0) {
+			outl(virt_to_bus(&vp->tx_ring[entry]), ioaddr + DownListPtr);
+			queued_packet++;
+		}
+		outw(DownUnstall, ioaddr + EL3_CMD);
+		restore_flags(flags);
+
+		vp->cur_tx++;
+		if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1)
+			vp->tx_full = 1;
+		else {					/* Clear previous interrupt enable. */
+			prev_entry->status &= ~TxIntrUploaded;
+			clear_bit(0, (void*)&dev->tbusy);
+		}
+		dev->trans_start = jiffies;
+		return 0;
+	}
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+static void vortex_interrupt IRQ(int irq, void *dev_id, struct pt_regs *regs)
+{
+#ifdef SA_SHIRQ		/* Use the now-standard shared IRQ implementation. */
+	struct device *dev = dev_id;
+#else
+	struct device *dev = (struct device *)(irq2dev_map[irq]);
+#endif
+	struct vortex_private *vp;
+	int ioaddr, status;
+	int latency;
+	int work_done = max_interrupt_work;
+
+	vp = (struct vortex_private *)dev->priv;
+	if (test_and_set_bit(0, (void*)&vp->in_interrupt)) {
+		printk(KERN_ERR "%s: Re-entering the interrupt handler.\n", dev->name);
+		return;
+	}
+
+	dev->interrupt = 1;
+	ioaddr = dev->base_addr;
+	latency = inb(ioaddr + Timer);
+
+	status = inw(ioaddr + EL3_STATUS);
+
+	if (vortex_debug > 4)
+		printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
+			   dev->name, status, latency);
+	do {
+		if (vortex_debug > 5)
+				printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n",
+					   dev->name, status);
+		if (status & RxComplete)
+			vortex_rx(dev);
+		if (status & UpComplete) {
+			outw(AckIntr | UpComplete, ioaddr + EL3_CMD);
+			boomerang_rx(dev);
+		}
+
+		if (status & TxAvailable) {
+			if (vortex_debug > 5)
+				printk(KERN_DEBUG "	TX room bit was handled.\n");
+			/* There's room in the FIFO for a full-sized packet. */
+			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+			clear_bit(0, (void*)&dev->tbusy);
+			mark_bh(NET_BH);
+		}
+
+		if (status & DownComplete) {
+			unsigned int dirty_tx = vp->dirty_tx;
+
+			while (vp->cur_tx - dirty_tx > 0) {
+				int entry = dirty_tx % TX_RING_SIZE;
+				if (inl(ioaddr + DownListPtr) ==
+					virt_to_bus(&vp->tx_ring[entry]))
+					break;			/* It still hasn't been processed. */
+				if (vp->tx_skbuff[entry]) {
+					DEV_FREE_SKB(vp->tx_skbuff[entry]);
+					vp->tx_skbuff[entry] = 0;
+				}
+				/* vp->stats.tx_packets++;  Counted below. */
+				dirty_tx++;
+			}
+			vp->dirty_tx = dirty_tx;
+			outw(AckIntr | DownComplete, ioaddr + EL3_CMD);
+			if (vp->tx_full && (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1)) {
+				vp->tx_full= 0;
+				clear_bit(0, (void*)&dev->tbusy);
+				mark_bh(NET_BH);
+			}
+		}
+#ifdef VORTEX_BUS_MASTER
+		if (status & DMADone) {
+			outw(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */
+			clear_bit(0, (void*)&dev->tbusy);
+			DEV_FREE_SKB(vp->tx_skb); /* Release the transfered buffer */
+			mark_bh(NET_BH);
+		}
+#endif
+		/* Check for all uncommon interrupts at once. */
+		if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq))
+			vortex_error(dev, status);
+
+		if (--work_done < 0) {
+			if ((status & (0x7fe - (UpComplete | DownComplete))) == 0) {
+				/* Just ack these and return. */
+				outw(AckIntr | UpComplete | DownComplete, ioaddr + EL3_CMD);
+			} else {
+				printk(KERN_WARNING "%s: Too much work in interrupt, status "
+					   "%4.4x.  Temporarily disabling functions (%4.4x).\n",
+					   dev->name, status, SetStatusEnb | ((~status) & 0x7FE));
+				/* Disable all pending interrupts. */
+				outw(SetStatusEnb | ((~status) & 0x7FE), ioaddr + EL3_CMD);
+				outw(AckIntr | 0x7FF, ioaddr + EL3_CMD);
+				/* Set a timer to reenable interrupts. */
+				
+				break;
+			}
+		}
+		/* Acknowledge the IRQ. */
+		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+
+	} while ((status = inw(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
+
+	if (vortex_debug > 4)
+		printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
+			   dev->name, status);
+
+	dev->interrupt = 0;
+	clear_bit(0, (void*)&vp->in_interrupt);
+	return;
+}
+
+static int
+vortex_rx(struct device *dev)
+{
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	int i;
+	short rx_status;
+
+	if (vortex_debug > 5)
+		printk(KERN_DEBUG"   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+			   inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
+	while ((rx_status = inw(ioaddr + RxStatus)) > 0) {
+		if (rx_status & 0x4000) { /* Error, update stats. */
+			unsigned char rx_error = inb(ioaddr + RxErrors);
+			if (vortex_debug > 2)
+				printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error);
+			vp->stats.rx_errors++;
+			if (rx_error & 0x01)  vp->stats.rx_over_errors++;
+			if (rx_error & 0x02)  vp->stats.rx_length_errors++;
+			if (rx_error & 0x04)  vp->stats.rx_frame_errors++;
+			if (rx_error & 0x08)  vp->stats.rx_crc_errors++;
+			if (rx_error & 0x10)  vp->stats.rx_length_errors++;
+		} else {
+			/* The packet length: up to 4.5K!. */
+			int pkt_len = rx_status & 0x1fff;
+			struct sk_buff *skb;
+
+			skb = DEV_ALLOC_SKB(pkt_len + 5);
+			if (vortex_debug > 4)
+				printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n",
+					   pkt_len, rx_status);
+			if (skb != NULL) {
+				skb->dev = dev;
+#if LINUX_VERSION_CODE >= 0x10300
+				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+				/* 'skb_put()' points to the start of sk_buff data area. */
+				insl(ioaddr + RX_FIFO, skb_put(skb, pkt_len),
+					 (pkt_len + 3) >> 2);
+				outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
+				skb->protocol = eth_type_trans(skb, dev);
+#else
+				skb->len = pkt_len;
+				/* 'skb->data' points to the start of sk_buff data area. */
+				insl(ioaddr + RX_FIFO, skb->data, (pkt_len + 3) >> 2);
+				outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
+#endif  /* KERNEL_1_3_0 */
+				netif_rx(skb);
+				dev->last_rx = jiffies;
+				vp->stats.rx_packets++;
+				/* Wait a limited time to go to next packet. */
+				for (i = 200; i >= 0; i--)
+					if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+						break;
+				continue;
+			} else if (vortex_debug)
+				printk(KERN_NOTICE "%s: No memory to allocate a sk_buff of "
+					   "size %d.\n", dev->name, pkt_len);
+		}
+		outw(RxDiscard, ioaddr + EL3_CMD);
+		vp->stats.rx_dropped++;
+		/* Wait a limited time to skip this packet. */
+		for (i = 200; i >= 0; i--)
+			if ( ! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+				break;
+	}
+
+	return 0;
+}
+
+static int
+boomerang_rx(struct device *dev)
+{
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+	int entry = vp->cur_rx % RX_RING_SIZE;
+	int ioaddr = dev->base_addr;
+	int rx_status;
+	int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx;
+
+	if (vortex_debug > 5)
+		printk(KERN_DEBUG "  In boomerang_rx(), status %4.4x, rx_status "
+			   "%4.4x.\n",
+			   inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
+	while ((--rx_work_limit >= 0) &&
+			((rx_status = vp->rx_ring[entry].status) & RxDComplete)) {
+		if (rx_status & RxDError) { /* Error, update stats. */
+			unsigned char rx_error = rx_status >> 16;
+			if (vortex_debug > 2)
+				printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error);
+			vp->stats.rx_errors++;
+			if (rx_error & 0x01)  vp->stats.rx_over_errors++;
+			if (rx_error & 0x02)  vp->stats.rx_length_errors++;
+			if (rx_error & 0x04)  vp->stats.rx_frame_errors++;
+			if (rx_error & 0x08)  vp->stats.rx_crc_errors++;
+			if (rx_error & 0x10)  vp->stats.rx_length_errors++;
+		} else {
+			/* The packet length: up to 4.5K!. */
+			int pkt_len = rx_status & 0x1fff;
+			struct sk_buff *skb;
+
+			if (vortex_debug > 4)
+				printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n",
+					   pkt_len, rx_status);
+
+			/* Check if the packet is long enough to just accept without
+			   copying to a properly sized skbuff. */
+			if (pkt_len < rx_copybreak
+				&& (skb = DEV_ALLOC_SKB(pkt_len + 2)) != 0) {
+				skb->dev = dev;
+#if LINUX_VERSION_CODE >= 0x10300
+				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+				/* 'skb_put()' points to the start of sk_buff data area. */
+				memcpy(skb_put(skb, pkt_len),
+					   bus_to_virt(vp->rx_ring[entry].addr),
+					   pkt_len);
+#else
+				memcpy(skb->data, bus_to_virt(vp->rx_ring[entry].addr), pkt_len);
+				skb->len = pkt_len;
+#endif
+				rx_copy++;
+			} else{
+				void *temp;
+				/* Pass up the skbuff already on the Rx ring. */
+				skb = vp->rx_skbuff[entry];
+				if (skb == NULL) {
+					printk(KERN_WARNING "%s: in boomerang_rx -- attempt to use NULL skb caught\n", dev->name);
+					break;
+				}
+				vp->rx_skbuff[entry] = NULL;
+#if LINUX_VERSION_CODE >= 0x10300
+				temp = skb_put(skb, pkt_len);
+#else
+				temp = skb->data;
+#endif
+				/* Remove this checking code for final release. */
+				if (bus_to_virt(vp->rx_ring[entry].addr) != temp)
+					printk(KERN_ERR "%s: Warning -- the skbuff addresses do not match"
+						   " in boomerang_rx: %p vs. %p.\n", dev->name,
+						   bus_to_virt(vp->rx_ring[entry].addr), temp);
+				rx_nocopy++;
+			}
+#if LINUX_VERSION_CODE > 0x10300
+			skb->protocol = eth_type_trans(skb, dev);
+			{					/* Use hardware checksum info. */
+				int csum_bits = rx_status & 0xee000000;
+				if (csum_bits &&
+					(csum_bits == (IPChksumValid | TCPChksumValid) ||
+					 csum_bits == (IPChksumValid | UDPChksumValid))) {
+					skb->ip_summed = CHECKSUM_UNNECESSARY;
+					rx_csumhits++;
+				}
+			}
+#else
+			skb->len = pkt_len;
+#endif
+			netif_rx(skb);
+			dev->last_rx = jiffies;
+			vp->stats.rx_packets++;
+		}
+		entry = (++vp->cur_rx) % RX_RING_SIZE;
+	}
+	/* Refill the Rx ring buffers. */
+	for (; vp->dirty_rx < vp->cur_rx; vp->dirty_rx++) {
+		struct sk_buff *skb;
+		entry = vp->dirty_rx % RX_RING_SIZE;
+		if (vp->rx_skbuff[entry] == NULL) {
+			skb = DEV_ALLOC_SKB(PKT_BUF_SZ);
+			if (skb == NULL) {
+				printk(KERN_DEBUG "%s: in boomerang_rx -- could not allocate skbuff\n", dev->name);
+				break;			/* Bad news!  */
+			}
+			skb->dev = dev;			/* Mark as being used by this device. */
+#if LINUX_VERSION_CODE > 0x10300
+			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
+			vp->rx_ring[entry].addr = virt_to_bus(skb->tail);
+#else
+			vp->rx_ring[entry].addr = virt_to_bus(skb->data);
+#endif
+			vp->rx_skbuff[entry] = skb;
+		}
+		vp->rx_ring[entry].status = 0;	/* Clear complete bit. */
+		outw(UpUnstall, ioaddr + EL3_CMD);
+	}
+
+	if (vp->dirty_rx >= RX_RING_SIZE ) {
+		vp->cur_rx -= RX_RING_SIZE;
+		vp->dirty_rx -= RX_RING_SIZE;
+	}
+
+	return 0;
+}
+
+static int
+vortex_close(struct device *dev)
+{
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	int i;
+
+	dev->start = 0;
+	dev->tbusy = 1;
+
+	if (vortex_debug > 1) {
+		printk(KERN_DEBUG"%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
+			   dev->name, inw(ioaddr + EL3_STATUS), inb(ioaddr + TxStatus));
+		printk(KERN_DEBUG "%s: vortex close stats: rx_nocopy %d rx_copy %d"
+			   " tx_queued %d Rx pre-checksummed %d.\n",
+			   dev->name, rx_nocopy, rx_copy, queued_packet, rx_csumhits);
+	}
+
+	del_timer(&vp->timer);
+
+	/* Turn off statistics ASAP.  We update vp->stats below. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+
+	/* Disable the receiver and transmitter. */
+	outw(RxDisable, ioaddr + EL3_CMD);
+	outw(TxDisable, ioaddr + EL3_CMD);
+
+	if (dev->if_port == XCVR_10base2)
+		/* Turn off thinnet power.  Green! */
+		outw(StopCoax, ioaddr + EL3_CMD);
+
+#ifdef SA_SHIRQ
+	free_irq(dev->irq, dev);
+#else
+	free_irq(dev->irq);
+	irq2dev_map[dev->irq] = 0;
+#endif
+
+	outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+
+	update_stats(ioaddr, dev);
+	if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */
+		outl(0, ioaddr + UpListPtr);
+		for (i = 0; i < RX_RING_SIZE; i++)
+			if (vp->rx_skbuff[i]) {
+#if LINUX_VERSION_CODE < 0x20100
+				vp->rx_skbuff[i]->free = 1;
+#endif
+				DEV_FREE_SKB(vp->rx_skbuff[i]);
+				vp->rx_skbuff[i] = 0;
+			}
+	}
+	if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */
+		outl(0, ioaddr + DownListPtr);
+		for (i = 0; i < TX_RING_SIZE; i++)
+			if (vp->tx_skbuff[i]) {
+				DEV_FREE_SKB(vp->tx_skbuff[i]);
+				vp->tx_skbuff[i] = 0;
+			}
+	}
+
+	MOD_DEC_USE_COUNT;
+
+	return 0;
+}
+
+static struct enet_statistics *
+vortex_get_stats(struct device *dev)
+{
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+	unsigned long flags;
+
+	if (dev->start) {
+		save_flags(flags);
+		cli();
+		update_stats(dev->base_addr, dev);
+		restore_flags(flags);
+	}
+	return &vp->stats;
+}
+
+/*  Update statistics.
+	Unlike with the EL3 we need not worry about interrupts changing
+	the window setting from underneath us, but we must still guard
+	against a race condition with a StatsUpdate interrupt updating the
+	table.  This is done by checking that the ASM (!) code generated uses
+	atomic updates with '+='.
+	*/
+static void update_stats(int ioaddr, struct device *dev)
+{
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+
+	/* Unlike the 3c5x9 we need not turn off stats updates while reading. */
+	/* Switch to the stats window, and read everything. */
+	EL3WINDOW(6);
+	vp->stats.tx_carrier_errors		+= inb(ioaddr + 0);
+	vp->stats.tx_heartbeat_errors	+= inb(ioaddr + 1);
+	/* Multiple collisions. */		inb(ioaddr + 2);
+	vp->stats.collisions			+= inb(ioaddr + 3);
+	vp->stats.tx_window_errors		+= inb(ioaddr + 4);
+	vp->stats.rx_fifo_errors		+= inb(ioaddr + 5);
+	vp->stats.tx_packets			+= inb(ioaddr + 6);
+	vp->stats.tx_packets			+= (inb(ioaddr + 9)&0x30) << 4;
+	/* Rx packets	*/				inb(ioaddr + 7);   /* Must read to clear */
+	/* Tx deferrals */				inb(ioaddr + 8);
+	/* Don't bother with register 9, an extension of registers 6&7.
+	   If we do use the 6&7 values the atomic update assumption above
+	   is invalid. */
+	inw(ioaddr + 10);	/* Total Rx and Tx octets. */
+	inw(ioaddr + 12);
+	/* New: On the Vortex we must also clear the BadSSD counter. */
+	EL3WINDOW(4);
+	inb(ioaddr + 12);
+
+	/* We change back to window 7 (not 1) with the Vortex. */
+	EL3WINDOW(7);
+	return;
+}
+
+#ifdef HAVE_PRIVATE_IOCTL
+static int vortex_ioctl(struct device *dev, struct ifreq *rq, int cmd)
+{
+	struct vortex_private *vp = (struct vortex_private *)dev->priv;
+	int ioaddr = dev->base_addr;
+	u16 *data = (u16 *)&rq->ifr_data;
+	int phy = vp->phys[0] & 0x1f;
+
+	if (vortex_debug > 2)
+		printk(KERN_DEBUG "%s: In ioct(%-.6s, %#4.4x) %4.4x %4.4x %4.4x %4.4x.\n",
+			   dev->name, rq->ifr_ifrn.ifrn_name, cmd,
+			   data[0], data[1], data[2], data[3]);
+
+    switch(cmd) {
+	case SIOCDEVPRIVATE:		/* Get the address of the PHY in use. */
+		data[0] = phy;
+	case SIOCDEVPRIVATE+1:		/* Read the specified MII register. */
+		EL3WINDOW(4);
+		data[3] = mdio_read(ioaddr, data[0] & 0x1f, data[1] & 0x1f);
+		return 0;
+	case SIOCDEVPRIVATE+2:		/* Write the specified MII register */
+		if (!suser())
+			return -EPERM;
+		mdio_write(ioaddr, data[0] & 0x1f, data[1] & 0x1f, data[2]);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+#endif  /* HAVE_PRIVATE_IOCTL */
+
+/* This new version of set_rx_mode() supports v1.4 kernels.
+   The Vortex chip has no documented multicast filter, so the only
+   multicast setting is to receive all multicast frames.  At least
+   the chip has a very clean way to set the mode, unlike many others. */
+static void
+set_rx_mode(struct device *dev)
+{
+	int ioaddr = dev->base_addr;
+	int new_mode;
+
+	if (dev->flags & IFF_PROMISC) {
+		if (vortex_debug > 0)
+			printk(KERN_NOTICE "%s: Setting promiscuous mode.\n", dev->name);
+		new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm;
+	} else	if ((dev->mc_list)  ||  (dev->flags & IFF_ALLMULTI)) {
+		new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast;
+	} else
+		new_mode = SetRxFilter | RxStation | RxBroadcast;
+
+	outw(new_mode, ioaddr + EL3_CMD);
+}
+#ifndef NEW_MULTICAST
+/* The old interface to set the Rx mode. */
+static void
+set_multicast_list(struct device *dev, int num_addrs, void *addrs)
+{
+	set_rx_mode(dev);
+}
+#endif
+
+
+/* MII transceiver control section.
+   Read and write the MII registers using software-generated serial
+   MDIO protocol.  See the MII specifications or DP83840A data sheet
+   for details. */
+
+/* The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
+   met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+   "overclocking" issues. */
+#define mdio_delay() udelay(1)
+
+#define MDIO_SHIFT_CLK	0x01
+#define MDIO_DIR_WRITE	0x04
+#define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE)
+#define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE)
+#define MDIO_DATA_READ	0x02
+#define MDIO_ENB_IN		0x00
+
+/* Generate the preamble required for initial synchronization and
+   a few older transceivers. */
+static void mdio_sync(int ioaddr, int bits)
+{
+	int mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+
+	/* Establish sync by sending at least 32 logic ones. */ 
+	while (-- bits >= 0) {
+		outw(MDIO_DATA_WRITE1, mdio_addr);
+		mdio_delay();
+		outw(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
+		mdio_delay();
+	}
+}
+
+static int mdio_read(int ioaddr, int phy_id, int location)
+{
+	int i;
+	int read_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+	unsigned int retval = 0;
+	int mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+
+	if (mii_preamble_required)
+		mdio_sync(ioaddr, 32);
+
+	/* Shift the read command bits out. */
+	for (i = 14; i >= 0; i--) {
+		int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+		outw(dataval, mdio_addr);
+		mdio_delay();
+		outw(dataval | MDIO_SHIFT_CLK, mdio_addr);
+		mdio_delay();
+	}
+	/* Read the two transition, 16 data, and wire-idle bits. */
+	for (i = 19; i > 0; i--) {
+		outw(MDIO_ENB_IN, mdio_addr);
+		mdio_delay();
+		retval = (retval << 1) | ((inw(mdio_addr) & MDIO_DATA_READ) ? 1 : 0);
+		outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+		mdio_delay();
+	}
+	return retval>>1 & 0xffff;
+}
+
+static void mdio_write(int ioaddr, int phy_id, int location, int value)
+{
+	int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value;
+	int mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+	int i;
+
+	if (mii_preamble_required)
+		mdio_sync(ioaddr, 32);
+
+	/* Shift the command bits out. */
+	for (i = 31; i >= 0; i--) {
+		int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+		outw(dataval, mdio_addr);
+		mdio_delay();
+		outw(dataval | MDIO_SHIFT_CLK, mdio_addr);
+		mdio_delay();
+	}
+	/* Leave the interface idle. */
+	for (i = 1; i >= 0; i--) {
+		outw(MDIO_ENB_IN, mdio_addr);
+		mdio_delay();
+		outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+		mdio_delay();
+	}
+
+	return;
+}
+
+
+#ifdef MODULE
+void
+cleanup_module(void)
+{
+	struct device *next_dev;
+
+#ifdef CARDBUS
+	unregister_driver(&vortex_ops);
+#endif
+
+	/* No need to check MOD_IN_USE, as sys_delete_module() checks. */
+	while (root_vortex_dev) {
+		next_dev = ((struct vortex_private *)root_vortex_dev->priv)->next_module;
+		unregister_netdev(root_vortex_dev);
+		outw(TotalReset, root_vortex_dev->base_addr + EL3_CMD);
+		release_region(root_vortex_dev->base_addr, VORTEX_TOTAL_SIZE);
+		kfree(root_vortex_dev);
+		root_vortex_dev = next_dev;
+	}
+}
+
+#endif  /* MODULE */
+
+/*
+ * Local variables:
+ *  compile-command: "gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c 3c59x.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
+ *  SMP-compile-command: "gcc -D__SMP__ -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c 3c59x.c"
+ *  compile-command-alt1: "gcc -DCARDBUS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c 3c59x.c -o 3c59x_cb.o"
+ *  c-indent-level: 4
+ *  c-basic-offset: 4
+ *  tab-width: 4
+ * End:
+ */