1998-11-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>

	Clean up linux emulation code to make it architecture-independent
	as much as possible.

	* linux: Renamed from linuxdev.
	* Makefile.in (objfiles): Add linux.o instead of linuxdev.o.
	(MAKE): New variable. Used for the linux.o target.
	* configure.in: Add AC_CHECK_TOOL(MAKE, make).
	* i386/i386/spl.h: Include <i386/ipl.h>, for compatibility with
	OSF Mach 3.0. Suggested by Elgin Lee <ehl@funghi.com>.
	* linux/src: Renamed from linux/linux.
	* linux/dev: Renamed from linux/mach.
	* linux/Drivers.in (AC_INIT): Use dev/include/linux/autoconf.h,
	instead of mach/include/linux/autoconf.h.
	* Makefile.in (all): Target ../linux.o instead of ../linuxdev.o.
	* linux/dev/drivers/block/genhd.c: Include <machine/spl.h> instead
	of <i386/ipl.h>.
	* linux/dev/drivers/net/auto_irq.c: Remove unneeded header files,
	<i386/ipl.h> and <i386/pic.h>.
	* linux/dev/init/main.c: Many i386-dependent codes moved to ...
	* linux/dev/arch/i386/irq.c: ... here.
	* linux/dev/arch/i386/setup.c: New file.
	* linux/dev/arch/i386/linux_emul.h: Likewise.
	* linux/dev/arch/i386/glue/timer.c: Merged into sched.c.
	* linux/dev/arch/i386/glue/sched.c: Include <machine/spl.h> instead
	of <i386/ipl.h>, and moved to ...
	* linux/dev/kernel/sched.c: ... here.
	* linux/dev/arch/i386/glue/block.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/blocl.c: ... here.
	* linux/dev/arch/i386/glue/net.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/net.c: ... here.
	* linux/dev/arch/i386/glue/misc.c: Remove `x86' and moved to ...
	* linux/dev/glue/misc.c: ... here.
	* linux/dev/arch/i386/glue/kmem.c: Moved to ...
	* linux/dev/glue/kmem.c: ... here.

1 files changed, 128 insertions, 0 deletions

diff --git a/linux/src/drivers/scsi/eata_dma.h b/linux/src/drivers/scsi/eata_dma.h
new file mode 100644
index 00000000..a23931bf
--- /dev/null
+++ b/linux/src/drivers/scsi/eata_dma.h
@@ -0,0 +1,128 @@
+/********************************************************
+* Header file for eata_dma.c Linux EATA-DMA SCSI driver *
+* (c) 1993-96 Michael Neuffer                           *
+*             mike@i-Connect.Net                        *
+*             neuffer@mail.uni-mainz.de                 *
+*********************************************************
+* last change: 96/10/14                                 *
+********************************************************/
+
+#ifndef _EATA_DMA_H
+#define _EATA_DMA_H
+
+#ifndef HOSTS_C
+
+#include "eata_generic.h"
+
+
+#define VER_MAJOR 2
+#define VER_MINOR 5
+#define VER_SUB   "9b"
+
+
+/************************************************************************
+ * Here you can switch parts of the code on and of                      *
+ ************************************************************************/
+
+#define CHECKPAL        0        /* EISA pal checking on/off            */
+#define CHECK_BLINK     1        /* Switch Blink state check off, might *
+                                  * be nessessary for some MIPS machines*/ 
+#define CRIPPLE_QUEUE   0        /* Only enable this if the interrupt 
+                                  * controller on your motherboard is 
+                                  * broken and you are experiencing 
+                                  * massive interrupt losses */
+
+/************************************************************************
+ * Debug options.                                                       * 
+ * Enable DEBUG and whichever options you require.                      *
+ ************************************************************************/
+#define DEBUG_EATA      1       /* Enable debug code.                   */
+#define DPT_DEBUG       0       /* Bobs special                         */
+#define DBG_DELAY       0       /* Build in delays so debug messages can be
+				 * be read before they vanish of the top of
+				 * the screen!                          */
+#define DBG_PROBE       0       /* Debug probe routines.                */
+#define DBG_PCI         0       /* Trace PCI routines                   */
+#define DBG_EISA        0       /* Trace EISA routines                  */
+#define DBG_ISA         0       /* Trace ISA routines                   */ 
+#define DBG_BLINK       0       /* Trace Blink check                    */
+#define DBG_PIO         0       /* Trace get_config_PIO                 */
+#define DBG_COM         0       /* Trace command call                   */
+#define DBG_QUEUE       0       /* Trace command queueing.              */
+#define DBG_QUEUE2      0       /* Trace command queueing SG.           */
+#define DBG_INTR        0       /* Trace interrupt service routine.     */
+#define DBG_INTR2       0       /* Trace interrupt service routine.     */
+#define DBG_INTR3       0       /* Trace get_board_data interrupts.     */
+#define DBG_REQSENSE    0       /* Trace request sense commands         */     
+#define DBG_RESET       0       /* Trace reset calls                    */     
+#define DBG_STATUS      0       /* Trace status generation              */
+#define DBG_PROC        0       /* Debug proc-fs related statistics     */
+#define DBG_PROC_WRITE  0
+#define DBG_REGISTER    0       /* */
+#define DBG_ABNORM      1       /* Debug abnormal actions (reset, abort)*/
+
+#if DEBUG_EATA 
+#define DBG(x, y)   if ((x)) {y;} 
+#else
+#define DBG(x, y)
+#endif
+
+#endif /* !HOSTS_C */
+
+int eata_detect(Scsi_Host_Template *);
+const char *eata_info(struct Scsi_Host *);
+int eata_command(Scsi_Cmnd *);
+int eata_queue(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *));
+int eata_abort(Scsi_Cmnd *);
+int eata_reset(Scsi_Cmnd *, unsigned int);
+int eata_proc_info(char *, char **, off_t, int, int, int);
+#ifdef MODULE
+int eata_release(struct Scsi_Host *);
+#else
+#define eata_release NULL  
+#endif
+
+#include <scsi/scsicam.h>
+
+#define EATA_DMA {                   \
+        NULL, NULL,                  \
+        NULL,               /* proc_dir_entry */ \
+        eata_proc_info,     /* procinfo       */ \
+        "EATA (Extended Attachment) HBA driver", \
+        eata_detect,                 \
+        eata_release,                \
+	NULL, NULL,                  \
+	eata_queue,                  \
+	eata_abort,                  \
+	eata_reset,                  \
+	NULL,   /* Slave attach */   \
+	scsicam_bios_param,          \
+	0,      /* Canqueue     */   \
+	0,      /* this_id      */   \
+	0,      /* sg_tablesize */   \
+	0,      /* cmd_per_lun  */   \
+	0,      /* present      */   \
+	1,      /* True if ISA  */   \
+	ENABLE_CLUSTERING }
+
+
+#endif /* _EATA_DMA_H */
+
+/*
+ * Overrides for Emacs so that we almost follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 4
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -4
+ * c-argdecl-indent: 4
+ * c-label-offset: -4
+ * c-continued-statement-offset: 4
+ * c-continued-brace-offset: 0
+ * indent-tabs-mode: nil
+ * tab-width: 8
+ * End:
+ */