1998-11-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>

	Clean up linux emulation code to make it architecture-independent
	as much as possible.

	* linux: Renamed from linuxdev.
	* Makefile.in (objfiles): Add linux.o instead of linuxdev.o.
	(MAKE): New variable. Used for the linux.o target.
	* configure.in: Add AC_CHECK_TOOL(MAKE, make).
	* i386/i386/spl.h: Include <i386/ipl.h>, for compatibility with
	OSF Mach 3.0. Suggested by Elgin Lee <ehl@funghi.com>.
	* linux/src: Renamed from linux/linux.
	* linux/dev: Renamed from linux/mach.
	* linux/Drivers.in (AC_INIT): Use dev/include/linux/autoconf.h,
	instead of mach/include/linux/autoconf.h.
	* Makefile.in (all): Target ../linux.o instead of ../linuxdev.o.
	* linux/dev/drivers/block/genhd.c: Include <machine/spl.h> instead
	of <i386/ipl.h>.
	* linux/dev/drivers/net/auto_irq.c: Remove unneeded header files,
	<i386/ipl.h> and <i386/pic.h>.
	* linux/dev/init/main.c: Many i386-dependent codes moved to ...
	* linux/dev/arch/i386/irq.c: ... here.
	* linux/dev/arch/i386/setup.c: New file.
	* linux/dev/arch/i386/linux_emul.h: Likewise.
	* linux/dev/arch/i386/glue/timer.c: Merged into sched.c.
	* linux/dev/arch/i386/glue/sched.c: Include <machine/spl.h> instead
	of <i386/ipl.h>, and moved to ...
	* linux/dev/kernel/sched.c: ... here.
	* linux/dev/arch/i386/glue/block.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/blocl.c: ... here.
	* linux/dev/arch/i386/glue/net.c: Include <machine/spl.h> and
	<linux_emul.h>, instead of i386-dependent header files, and
	moved to ...
	* linux/dev/glue/net.c: ... here.
	* linux/dev/arch/i386/glue/misc.c: Remove `x86' and moved to ...
	* linux/dev/glue/misc.c: ... here.
	* linux/dev/arch/i386/glue/kmem.c: Moved to ...
	* linux/dev/glue/kmem.c: ... here.

1 files changed, 260 insertions, 0 deletions

diff --git a/linux/src/drivers/scsi/eata_dma_proc.h b/linux/src/drivers/scsi/eata_dma_proc.h
new file mode 100644
index 00000000..d49f348e
--- /dev/null
+++ b/linux/src/drivers/scsi/eata_dma_proc.h
@@ -0,0 +1,260 @@
+
+struct lun_map {
+    __u8   id:5,
+     chan:3;
+    __u8 lun;
+};
+
+typedef struct emul_pp {
+    __u8 p_code:6,
+       null:1,
+     p_save:1;
+    __u8 p_length;
+    __u16 cylinder;
+    __u8 heads;
+    __u8 sectors;
+    __u8 null2;
+    __u8 s_lunmap:4,
+	  ems:1;
+    __u16 drive_type;	/* In Little Endian ! */
+    struct lun_map lunmap[4];
+}emulpp;
+
+
+/* Log Sense pages */
+
+typedef struct log_sheader {
+    __u8 page_code,
+     reserved;
+    __u16 length;
+}logsh;
+
+
+/* Log Sense Statistics */
+
+typedef struct read_command_statistics {
+    __u16 code;	       /* 0x01 */
+    __u8  flags;
+    __u8  length;      /* 0x24 */
+    __u32 h_commands,
+      uncached,
+      la_cmds,
+      la_blks,
+      la_hits,
+      missed,
+      hits,
+      seq_la_blks,
+      seq_la_hits;
+}r_cmd_stat;
+
+typedef struct write_command_statistics {
+    __u16 code;	       /* 0x03 */
+    __u8  flags;
+    __u8  length;      /* 0x28 */
+    __u32 h_commands,
+      uncached,
+      thru,
+      bypass,
+      soft_err,
+      hits,
+      b_idle,
+      b_activ,
+      b_blks,
+      b_blks_clean;
+}w_cmd_stat;
+
+typedef struct host_command_statistics {
+    __u16 code;		 /* 0x02, 0x04 */
+    __u8  flags;
+    __u8  length;	 /* 0x30 */
+    __u32 sizes[12];
+}hst_cmd_stat;
+
+typedef struct physical_command_statistics {
+    __u16 code;		 /* 0x06, 0x07 */ 
+    __u8  flags;
+    __u8  length;	 /* 0x34 */
+    __u32 sizes[13]; 
+}phy_cmd_stat;
+
+typedef struct misc_device_statistics {
+    __u16 code;		  /* 0x05 */
+    __u8  flags;
+    __u8  length;	  /* 0x10 */
+    __u32 disconnect,
+      pass_thru,
+      sg_commands,
+      stripe_boundary_crosses;
+}msc_stats;
+ 
+/* Configuration Pages */
+
+typedef struct controller_configuration {
+    __u16 code;		  /* 0x01 */
+    __u8  flags;
+    __u8  length;	  /* 0x02 */
+    __u8  intt:1,
+       sec:1,
+       csh:1,
+       key:1,
+       tmr:1,
+       srs:1,
+       nvr:1;
+    __u8  interrupt;
+}coco;
+
+typedef struct controller_hardware_errors {
+    __u16 code;		  /* 0x02 */
+    __u8  flags;
+    __u8  length;	  /* 0x02 */
+    __u8  unused:1,
+	 per:1;
+    __u8  interrupt;
+}coher;
+
+typedef struct memory_map {
+    __u16 code;		  /* 0x03, 0x04 */
+    __u8  flags;
+    __u8  length;	  /* 0x04 */
+    __u32 memory_map;
+}mema;
+
+typedef struct scsi_transfer {
+    __u16 code;		  /* 0x05 */
+    __u8  flags;
+    __u8  length;	  /* 0x04 */
+    __u8  offset,
+      period;
+    __u16 speed;
+}scsitrans;
+
+typedef struct scsi_modes {
+    __u16 code;		  /* 0x06 */
+    __u8  flags;
+    __u8  length;	  /* 0x02 */
+    __u8  que:1,
+     cdis:1,
+     wtru:1,
+     dasd:1,
+      ncr:1,
+     awre:1;
+    __u8  reserved;
+}scsimod;
+
+typedef struct host_bus {
+    __u16 code;		  /* 0x07 */
+    __u8  flags;
+    __u8  length;	  /* 0x02 */
+    __u8  speed:6,
+	pci:1,
+       eisa:1;
+    __u8  reserved;
+}hobu;
+
+typedef struct scsi_bus {
+    __u16 code;		  /* 0x08 */
+    __u8  flags;
+    __u8  length;	  /* 0x02 */
+    __u8  speed:4,
+	res:1,
+	ext:1,
+       wide:1,
+	dif:1;
+    __u8 busnum;
+}scbu;
+
+typedef struct board_type {
+    __u16 code;		  /* 0x09 */
+    __u8  flags;
+    __u8  length;	  /* 0x04 */
+    __u8  unused:1,
+	 cmi:1,
+	 dmi:1,
+	cm4k:1,
+	 cm4:1,
+	dm4k:1,
+	 dm4:1,
+	 hba:1;
+    __u8  cpu_type,
+      cpu_speed;
+    __u8    sx1:1,
+	sx2:1,
+    unused2:4,
+       alrm:1,
+       srom:1;
+}boty;
+
+typedef struct memory_config {
+    __u16 code;		  /* 0x0a */
+    __u8  flags;
+    __u8  length;	  /* 0x04 */
+    __u8  banksize[4];
+}memco;
+
+typedef struct firmware_info {
+    __u16 code;		  /* 0x0b */
+    __u8  flags;
+    __u8  length;	  /* 0x04 */
+    __u8  dnld:1,
+     bs528:1,
+       fmt:1,
+     fw528:1;
+    __u8  unused1,
+      fw_type,
+      unused;
+}firm;
+
+typedef struct subsystem_info {
+    __u16 code;		  /* 0x0c */
+    __u8  flags;
+    __u8  length;	  /* 0x02 */
+    __u8  shlf:1,
+      swap:1,
+      noss:1;
+    __u8  reserved;
+}subinf;
+
+typedef struct per_channel_info {
+    __u16 code;		  /* 0x0d */
+    __u8  flags;
+    __u8  length;	  /* 0x02 */
+    __u8  channel;
+    __u8  shlf:1,
+      swap:1,
+      noss:1,
+       srs:1,
+       que:1,
+       ext:1,
+      wide:1,
+      diff:1;
+}pcinf;
+
+typedef struct array_limits {
+    __u16 code;		  /* 0x0e */
+    __u8  flags;
+    __u8  length;	  /* 0x04 */
+    __u8  max_groups,
+      raid0_drv,
+      raid35_drv,
+      unused;
+}arrlim;
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 4
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -4
+ * c-argdecl-indent: 4
+ * c-label-offset: -4
+ * c-continued-statement-offset: 4
+ * c-continued-brace-offset: 0
+ * indent-tabs-mode: nil
+ * tab-width: 8
+ * End:
+ */
+