1 files changed, 90 insertions, 0 deletions
diff --git a/linux/src/drivers/net/pci-scan.h b/linux/src/drivers/net/pci-scan.h
new file mode 100644
index 00000000..649b34bf
--- /dev/null
+++ b/linux/src/drivers/net/pci-scan.h
@@ -0,0 +1,90 @@
+#ifndef _PCI_SCAN_H
+#define _PCI_SCAN_H
+/*
+  version 1.02 $Version:$ $Date: 2006/01/22 15:54:41 $
+   Copyright 1999-2001 Donald Becker / Scyld Computing Corporation
+   This software is part of the Linux kernel.  It may be used and
+   distributed according to the terms of the GNU Public License,
+   incorporated herein by reference.
+*/
+
+/*
+  These are the structures in the table that drives the PCI probe routines.
+  Note the matching code uses a bitmask: more specific table entries should
+  be placed before "catch-all" entries.
+
+  The table must be zero terminated.
+*/
+enum pci_id_flags_bits {
+	/* Set PCI command register bits before calling probe1(). */
+	PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
+	/* Read and map the single following PCI BAR. */
+	PCI_ADDR0=0<<4, PCI_ADDR1=1<<4, PCI_ADDR2=2<<4, PCI_ADDR3=3<<4,
+	PCI_ADDR_64BITS=0x100, PCI_NO_ACPI_WAKE=0x200, PCI_NO_MIN_LATENCY=0x400,
+	PCI_UNUSED_IRQ=0x800,
+};
+
+struct pci_id_info {
+	const char *name;
+	struct match_info {
+		int	pci, pci_mask, subsystem, subsystem_mask;
+		int revision, revision_mask; 				/* Only 8 bits. */
+	} id;
+	enum pci_id_flags_bits pci_flags;
+	int io_size;				/* Needed for I/O region check or ioremap(). */
+	int drv_flags;				/* Driver use, intended as capability flags. */
+};
+
+enum drv_id_flags {
+	PCI_HOTSWAP=1, /* Leave module loaded for Cardbus-like chips. */
+};
+enum drv_pwr_action {
+	DRV_NOOP,			/* No action. */
+	DRV_ATTACH,			/* The driver may expect power ops. */
+	DRV_SUSPEND,		/* Machine suspending, next event RESUME or DETACH. */
+	DRV_RESUME,			/* Resume from previous SUSPEND  */
+	DRV_DETACH,			/* Card will-be/is gone. Valid from SUSPEND! */
+	DRV_PWR_WakeOn,		/* Put device in e.g. Wake-On-LAN mode. */
+	DRV_PWR_DOWN,		/* Go to lowest power mode. */
+	DRV_PWR_UP,			/* Go to normal power mode. */
+};
+
+struct drv_id_info {
+	const char *name;			/* Single-word driver name. */
+	int flags;
+	int pci_class;				/* Typically PCI_CLASS_NETWORK_ETHERNET<<8. */
+	struct pci_id_info *pci_dev_tbl;
+	void *(*probe1)(struct pci_dev *pdev, void *dev_ptr,
+					long ioaddr, int irq, int table_idx, int fnd_cnt);
+	/* Optional, called for suspend, resume and detach. */
+	int (*pwr_event)(void *dev, int event);
+	/* Internal values. */
+	struct drv_id_info *next;
+	void *cb_ops;
+};
+
+/*  PCI scan and activate.
+	Scan PCI-like hardware, calling probe1(..,dev,..) on devices that match.
+	Returns -ENODEV, a negative number, if no cards are found. */
+
+extern int pci_drv_register(struct drv_id_info *drv_id, void *initial_device);
+extern void pci_drv_unregister(struct drv_id_info *drv_id);
+
+
+/*  ACPI routines.
+	Wake (change to ACPI D0 state) or set the ACPI power level of a sleeping
+	ACPI device.  Returns the old power state.  */
+
+int acpi_wake(struct pci_dev *pdev);
+enum  acpi_pwr_state {ACPI_D0, ACPI_D1, ACPI_D2, ACPI_D3};
+int acpi_set_pwr_state(struct pci_dev *pdev, enum acpi_pwr_state state);
+
+
+/*
+ * Local variables:
+ *  c-indent-level: 4
+ *  c-basic-offset: 4
+ *  tab-width: 4
+ * End:
+ */
+#endif