diff options
Diffstat (limited to 'scsi/adapters/scsi_5380.h')
| -rw-r--r-- | scsi/adapters/scsi_5380.h | 126 |
1 files changed, 0 insertions, 126 deletions
diff --git a/scsi/adapters/scsi_5380.h b/scsi/adapters/scsi_5380.h deleted file mode 100644 index 12be9221..00000000 --- a/scsi/adapters/scsi_5380.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1991,1990,1989 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ -/* - * File: scsi_5380.h - * Author: Alessandro Forin, Carnegie Mellon University - * Date: 5/91 - * - * Defines for the NCR 5380 (SCSI chip), aka Am5380 - */ - -/* - * Register map - */ - -typedef struct { - volatile unsigned char sci_data; /* r: Current data */ -#define sci_odata sci_data /* w: Out data */ - volatile unsigned char sci_icmd; /* rw: Initiator command */ - volatile unsigned char sci_mode; /* rw: Mode */ - volatile unsigned char sci_tcmd; /* rw: Target command */ - volatile unsigned char sci_bus_csr; /* r: Bus Status */ -#define sci_sel_enb sci_bus_csr /* w: Select enable */ - volatile unsigned char sci_csr; /* r: Status */ -#define sci_dma_send sci_csr /* w: Start dma send data */ - volatile unsigned char sci_idata; /* r: Input data */ -#define sci_trecv sci_idata /* w: Start dma receive, target */ - volatile unsigned char sci_iack; /* r: Interrupt Acknowledge */ -#define sci_irecv sci_iack /* w: Start dma receive, initiator */ -} sci_regmap_t; - - -/* - * Initiator command register - */ - -#define SCI_ICMD_DATA 0x01 /* rw: Assert data bus */ -#define SCI_ICMD_ATN 0x02 /* rw: Assert ATN signal */ -#define SCI_ICMD_SEL 0x04 /* rw: Assert SEL signal */ -#define SCI_ICMD_BSY 0x08 /* rw: Assert BSY signal */ -#define SCI_ICMD_ACK 0x10 /* rw: Assert ACK signal */ -#define SCI_ICMD_LST 0x20 /* r: Lost arbitration */ -#define SCI_ICMD_DIFF SCI_ICMD_LST /* w: Differential cable */ -#define SCI_ICMD_AIP 0x40 /* r: Arbitration in progress */ -#define SCI_ICMD_TEST SCI_ICMD_AIP /* w: Test mode */ -#define SCI_ICMD_RST 0x80 /* rw: Assert RST signal */ - - -/* - * Mode register - */ - -#define SCI_MODE_ARB 0x01 /* rw: Start arbitration */ -#define SCI_MODE_DMA 0x02 /* rw: Enable DMA xfers */ -#define SCI_MODE_MONBSY 0x04 /* rw: Monitor BSY signal */ -#define SCI_MODE_DMA_IE 0x08 /* rw: Enable DMA complete interrupt */ -#define SCI_MODE_PERR_IE 0x10 /* rw: Interrupt on parity errors */ -#define SCI_MODE_PAR_CHK 0x20 /* rw: Check parity */ -#define SCI_MODE_TARGET 0x40 /* rw: Target mode (Initiator if 0) */ -#define SCI_MODE_BLOCKDMA 0x80 /* rw: Block-mode DMA handshake (MBZ) */ - - -/* - * Target command register - */ - -#define SCI_TCMD_IO 0x01 /* rw: Assert I/O signal */ -#define SCI_TCMD_CD 0x02 /* rw: Assert C/D signal */ -#define SCI_TCMD_MSG 0x04 /* rw: Assert MSG signal */ -#define SCI_TCMD_PHASE_MASK 0x07 /* r: Mask for current bus phase */ -#define SCI_TCMD_REQ 0x08 /* rw: Assert REQ signal */ -#define SCI_TCMD_LAST_SENT 0x80 /* ro: Last byte was xferred - * (not on 5380/1) */ - -#define SCI_PHASE(x) SCSI_PHASE(x) - -/* - * Current (SCSI) Bus status - */ - -#define SCI_BUS_DBP 0x01 /* r: Data Bus parity */ -#define SCI_BUS_SEL 0x02 /* r: SEL signal */ -#define SCI_BUS_IO 0x04 /* r: I/O signal */ -#define SCI_BUS_CD 0x08 /* r: C/D signal */ -#define SCI_BUS_MSG 0x10 /* r: MSG signal */ -#define SCI_BUS_REQ 0x20 /* r: REQ signal */ -#define SCI_BUS_BSY 0x40 /* r: BSY signal */ -#define SCI_BUS_RST 0x80 /* r: RST signal */ - -#define SCI_CUR_PHASE(x) SCSI_PHASE((x)>>2) - -/* - * Bus and Status register - */ - -#define SCI_CSR_ACK 0x01 /* r: ACK signal */ -#define SCI_CSR_ATN 0x02 /* r: ATN signal */ -#define SCI_CSR_DISC 0x04 /* r: Disconnected (BSY==0) */ -#define SCI_CSR_PHASE_MATCH 0x08 /* r: Bus and SCI_TCMD match */ -#define SCI_CSR_INT 0x10 /* r: Interrupt request */ -#define SCI_CSR_PERR 0x20 /* r: Parity error */ -#define SCI_CSR_DREQ 0x40 /* r: DMA request */ -#define SCI_CSR_DONE 0x80 /* r: DMA count is zero */ - |