diff options
Diffstat (limited to 'scsi/adapters/scsi_53C94.h')
| -rw-r--r-- | scsi/adapters/scsi_53C94.h | 253 |
1 files changed, 0 insertions, 253 deletions
diff --git a/scsi/adapters/scsi_53C94.h b/scsi/adapters/scsi_53C94.h deleted file mode 100644 index 82891f30..00000000 --- a/scsi/adapters/scsi_53C94.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1991,1990,1989 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* - * File: scsi_53C94.h - * Author: Alessandro Forin, Carnegie Mellon University - * Date: 9/90 - * - * Defines for the NCR 53C94 ASC (SCSI interface) - * Some gotcha came from the "86C01/53C94 DMA lab work" written - * by Ken Stewart (NCR MED Logic Products Applications Engineer) - * courtesy of NCR. Thanks Ken ! - */ - -/* - * Register map - */ - -typedef struct { - volatile unsigned char asc_tc_lsb; /* rw: Transfer Counter LSB */ - volatile unsigned char asc_tc_msb; /* rw: Transfer Counter MSB */ - volatile unsigned char asc_fifo; /* rw: FIFO top */ - volatile unsigned char asc_cmd; /* rw: Command */ - volatile unsigned char asc_csr; /* r: Status */ -#define asc_dbus_id asc_csr /* w: Destination Bus ID */ - volatile unsigned char asc_intr; /* r: Interrupt */ -#define asc_sel_timo asc_intr /* w: (re)select timeout */ - volatile unsigned char asc_ss; /* r: Sequence Step */ -#define asc_syn_p asc_ss /* w: synchronous period */ - volatile unsigned char asc_flags; /* r: FIFO flags + seq step */ -#define asc_syn_o asc_flags /* w: synchronous offset */ - volatile unsigned char asc_cnfg1; /* rw: Configuration 1 */ - volatile unsigned char asc_ccf; /* w: Clock Conv. Factor */ - volatile unsigned char asc_test; /* w: Test Mode */ - volatile unsigned char asc_cnfg2; /* rw: Configuration 2 */ - volatile unsigned char asc_cnfg3; /* rw: Configuration 3 */ - volatile unsigned char asc_rfb; /* w: Reserve FIFO byte */ -} asc_regmap_t; - - -/* - * Transfer Count: access macros - * That a NOP is required after loading the dma counter - * I learned on the NCR test code. Sic. - */ - -#define ASC_TC_MAX 0x10000 - -#define ASC_TC_GET(ptr,val) \ - val = ((ptr)->asc_tc_lsb&0xff)|(((ptr)->asc_tc_msb&0xff)<<8) -#define ASC_TC_PUT(ptr,val) \ - (ptr)->asc_tc_lsb=(val); \ - (ptr)->asc_tc_msb=(val)>>8; mb(); \ - (ptr)->asc_cmd = ASC_CMD_NOP|ASC_CMD_DMA; - -/* - * FIFO register - */ - -#define ASC_FIFO_DEEP 16 - - -/* - * Command register (command codes) - */ - -#define ASC_CMD_DMA 0x80 - /* Miscellaneous */ -#define ASC_CMD_NOP 0x00 -#define ASC_CMD_FLUSH 0x01 -#define ASC_CMD_RESET 0x02 -#define ASC_CMD_BUS_RESET 0x03 - /* Initiator state */ -#define ASC_CMD_XFER_INFO 0x10 -#define ASC_CMD_I_COMPLETE 0x11 -#define ASC_CMD_MSG_ACPT 0x12 -#define ASC_CMD_XFER_PAD 0x18 -#define ASC_CMD_SET_ATN 0x1a -#define ASC_CMD_CLR_ATN 0x1b - /* Target state */ -#define ASC_CMD_SND_MSG 0x20 -#define ASC_CMD_SND_STATUS 0x21 -#define ASC_CMD_SND_DATA 0x22 -#define ASC_CMD_DISC_SEQ 0x23 -#define ASC_CMD_TERM 0x24 -#define ASC_CMD_T_COMPLETE 0x25 -#define ASC_CMD_DISC 0x27 -#define ASC_CMD_RCV_MSG 0x28 -#define ASC_CMD_RCV_CDB 0x29 -#define ASC_CMD_RCV_DATA 0x2a -#define ASC_CMD_RCV_CMD 0x2b -#define ASC_CMD_ABRT_DMA 0x04 - /* Disconnected state */ -#define ASC_CMD_RESELECT 0x40 -#define ASC_CMD_SEL 0x41 -#define ASC_CMD_SEL_ATN 0x42 -#define ASC_CMD_SEL_ATN_STOP 0x43 -#define ASC_CMD_ENABLE_SEL 0x44 -#define ASC_CMD_DISABLE_SEL 0x45 -#define ASC_CMD_SEL_ATN3 0x46 - -/* this is approximate (no ATN3) but good enough */ -#define asc_isa_select(cmd) (((cmd)&0x7c)==0x40) - -/* - * Status register, and phase encoding - */ - -#define ASC_CSR_INT 0x80 -#define ASC_CSR_GE 0x40 -#define ASC_CSR_PE 0x20 -#define ASC_CSR_TC 0x10 -#define ASC_CSR_VGC 0x08 -#define ASC_CSR_MSG 0x04 -#define ASC_CSR_CD 0x02 -#define ASC_CSR_IO 0x01 - -#define ASC_PHASE(csr) SCSI_PHASE(csr) - -/* - * Destination Bus ID - */ - -#define ASC_DEST_ID_MASK 0x07 - - -/* - * Interrupt register - */ - -#define ASC_INT_RESET 0x80 -#define ASC_INT_ILL 0x40 -#define ASC_INT_DISC 0x20 -#define ASC_INT_BS 0x10 -#define ASC_INT_FC 0x08 -#define ASC_INT_RESEL 0x04 -#define ASC_INT_SEL_ATN 0x02 -#define ASC_INT_SEL 0x01 - - -/* - * Timeout register: - * - * val = (timeout * CLK_freq) / (8192 * CCF); - */ - -#define asc_timeout_250(clk,ccf) ((31*clk)/ccf) - -/* - * Sequence Step register - */ - -#define ASC_SS_XXXX 0xf0 -#define ASC_SS_SOM 0x80 -#define ASC_SS_MASK 0x07 -#define ASC_SS(ss) ((ss)&ASC_SS_MASK) - -/* - * Synchronous Transfer Period - */ - -#define ASC_STP_MASK 0x1f -#define ASC_STP_MIN 0x05 /* 5 clk per byte */ -#define ASC_STP_MAX 0x04 /* after ovfl, 35 clk/byte */ - -/* - * FIFO flags - */ - -#define ASC_FLAGS_SEQ_STEP 0xe0 -#define ASC_FLAGS_FIFO_CNT 0x1f - -/* - * Synchronous offset - */ - -#define ASC_SYNO_MASK 0x0f /* 0 -> asyn */ - -/* - * Configuration 1 - */ - -#define ASC_CNFG1_SLOW 0x80 -#define ASC_CNFG1_SRD 0x40 -#define ASC_CNFG1_P_TEST 0x20 -#define ASC_CNFG1_P_CHECK 0x10 -#define ASC_CNFG1_TEST 0x08 -#define ASC_CNFG1_MY_BUS_ID 0x07 - -/* - * CCF register - */ - -#define ASC_CCF_10MHz 0x2 -#define ASC_CCF_15MHz 0x3 -#define ASC_CCF_20MHz 0x4 -#define ASC_CCF_25MHz 0x5 - -#define mhz_to_ccf(x) (((x-1)/5)+1) /* see specs for limits */ - -/* - * Test register - */ - -#define ASC_TEST_XXXX 0xf8 -#define ASC_TEST_HI_Z 0x04 -#define ASC_TEST_I 0x02 -#define ASC_TEST_T 0x01 - -/* - * Configuration 2 - */ - -#define ASC_CNFG2_RFB 0x80 -#define ASC_CNFG2_EPL 0x40 -#define ASC_CNFG2_EBC 0x20 -#define ASC_CNFG2_DREQ_HIZ 0x10 -#define ASC_CNFG2_SCSI2 0x08 -#define ASC_CNFG2_BPA 0x04 -#define ASC_CNFG2_RPE 0x02 -#define ASC_CNFG2_DPE 0x01 - -/* - * Configuration 3 - */ - -#define ASC_CNFG3_XXXX 0xf8 -#define ASC_CNFG3_SRB 0x04 -#define ASC_CNFG3_ALT_DMA 0x02 -#define ASC_CNFG3_T8 0x01 - |