path: root/src/decoder_impl.cc

// Copyright 2019 The libgav1 Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include "src/decoder_impl.h"

#include <algorithm>
#include <atomic>
#include <cassert>
#include <iterator>
#include <new>
#include <utility>

#include "src/dsp/common.h"
#include "src/dsp/constants.h"
#include "src/dsp/dsp.h"
#include "src/film_grain.h"
#include "src/frame_buffer_utils.h"
#include "src/frame_scratch_buffer.h"
#include "src/loop_restoration_info.h"
#include "src/obu_parser.h"
#include "src/post_filter.h"
#include "src/prediction_mask.h"
#include "src/threading_strategy.h"
#include "src/utils/blocking_counter.h"
#include "src/utils/common.h"
#include "src/utils/constants.h"
#include "src/utils/logging.h"
#include "src/utils/raw_bit_reader.h"
#include "src/utils/segmentation.h"
#include "src/utils/threadpool.h"
#include "src/yuv_buffer.h"

namespace libgav1 {
namespace {

constexpr int kMaxBlockWidth4x4 = 32;
constexpr int kMaxBlockHeight4x4 = 32;

// Computes the bottom border size in pixels. If CDEF, loop restoration or
// SuperRes is enabled, adds extra border pixels to facilitate those steps to
// happen nearly in-place (a few extra rows instead of an entire frame buffer).
// The logic in this function should match the corresponding logic for
// |vertical_shift| in the PostFilter constructor.
int GetBottomBorderPixels(const bool do_cdef, const bool do_restoration,
                          const bool do_superres, const int subsampling_y) {
  int extra_border = 0;
  if (do_cdef) {
    extra_border += kCdefBorder;
  } else if (do_restoration) {
    // If CDEF is enabled, loop restoration is safe without extra border.
    extra_border += kRestorationVerticalBorder;
  }
  if (do_superres) extra_border += kSuperResVerticalBorder;
  // Double the number of extra bottom border pixels if the bottom border will
  // be subsampled.
  extra_border <<= subsampling_y;
  return Align(kBorderPixels + extra_border, 2);  // Must be a multiple of 2.
}

// Sets |frame_scratch_buffer->tile_decoding_failed| to true (while holding on
// to |frame_scratch_buffer->superblock_row_mutex|) and notifies the first
// |count| condition variables in
// |frame_scratch_buffer->superblock_row_progress_condvar|.
void SetFailureAndNotifyAll(FrameScratchBuffer* const frame_scratch_buffer,
                            int count) {
  {
    std::lock_guard<std::mutex> lock(
        frame_scratch_buffer->superblock_row_mutex);
    frame_scratch_buffer->tile_decoding_failed = true;
  }
  std::condition_variable* const condvars =
      frame_scratch_buffer->superblock_row_progress_condvar.get();
  for (int i = 0; i < count; ++i) {
    condvars[i].notify_one();
  }
}

// Helper class that releases the frame scratch buffer in the destructor.
class FrameScratchBufferReleaser {
 public:
  FrameScratchBufferReleaser(
      FrameScratchBufferPool* frame_scratch_buffer_pool,
      std::unique_ptr<FrameScratchBuffer>* frame_scratch_buffer)
      : frame_scratch_buffer_pool_(frame_scratch_buffer_pool),
        frame_scratch_buffer_(frame_scratch_buffer) {}
  ~FrameScratchBufferReleaser() {
    frame_scratch_buffer_pool_->Release(std::move(*frame_scratch_buffer_));
  }

 private:
  FrameScratchBufferPool* const frame_scratch_buffer_pool_;
  std::unique_ptr<FrameScratchBuffer>* const frame_scratch_buffer_;
};

// Sets the |frame|'s segmentation map for two cases. The third case is handled
// in Tile::DecodeBlock().
void SetSegmentationMap(const ObuFrameHeader& frame_header,
                        const SegmentationMap* prev_segment_ids,
                        RefCountedBuffer* const frame) {
  if (!frame_header.segmentation.enabled) {
    // All segment_id's are 0.
    frame->segmentation_map()->Clear();
  } else if (!frame_header.segmentation.update_map) {
    // Copy from prev_segment_ids.
    if (prev_segment_ids == nullptr) {
      // Treat a null prev_segment_ids pointer as if it pointed to a
      // segmentation map containing all 0s.
      frame->segmentation_map()->Clear();
    } else {
      frame->segmentation_map()->CopyFrom(*prev_segment_ids);
    }
  }
}

StatusCode DecodeTilesNonFrameParallel(
    const ObuSequenceHeader& sequence_header,
    const ObuFrameHeader& frame_header,
    const Vector<std::unique_ptr<Tile>>& tiles,
    FrameScratchBuffer* const frame_scratch_buffer,
    PostFilter* const post_filter) {
  // Decode in superblock row order.
  const int block_width4x4 = sequence_header.use_128x128_superblock ? 32 : 16;
  std::unique_ptr<TileScratchBuffer> tile_scratch_buffer =
      frame_scratch_buffer->tile_scratch_buffer_pool.Get();
  if (tile_scratch_buffer == nullptr) return kLibgav1StatusOutOfMemory;
  for (int row4x4 = 0; row4x4 < frame_header.rows4x4;
       row4x4 += block_width4x4) {
    for (const auto& tile_ptr : tiles) {
      if (!tile_ptr->ProcessSuperBlockRow<kProcessingModeParseAndDecode, true>(
              row4x4, tile_scratch_buffer.get())) {
        return kLibgav1StatusUnknownError;
      }
    }
    post_filter->ApplyFilteringForOneSuperBlockRow(
        row4x4, block_width4x4, row4x4 + block_width4x4 >= frame_header.rows4x4,
        /*do_deblock=*/true);
  }
  frame_scratch_buffer->tile_scratch_buffer_pool.Release(
      std::move(tile_scratch_buffer));
  return kStatusOk;
}

StatusCode DecodeTilesThreadedNonFrameParallel(
    const Vector<std::unique_ptr<Tile>>& tiles,
    FrameScratchBuffer* const frame_scratch_buffer,
    PostFilter* const post_filter,
    BlockingCounterWithStatus* const pending_tiles) {
  ThreadingStrategy& threading_strategy =
      frame_scratch_buffer->threading_strategy;
  const int num_workers = threading_strategy.tile_thread_count();
  BlockingCounterWithStatus pending_workers(num_workers);
  std::atomic<int> tile_counter(0);
  const int tile_count = static_cast<int>(tiles.size());
  bool tile_decoding_failed = false;
  // Submit tile decoding jobs to the thread pool.
  for (int i = 0; i < num_workers; ++i) {
    threading_strategy.tile_thread_pool()->Schedule([&tiles, tile_count,
                                                     &tile_counter,
                                                     &pending_workers,
                                                     &pending_tiles]() {
      bool failed = false;
      int index;
      while ((index = tile_counter.fetch_add(1, std::memory_order_relaxed)) <
             tile_count) {
        if (!failed) {
          const auto& tile_ptr = tiles[index];
          if (!tile_ptr->ParseAndDecode()) {
            LIBGAV1_DLOG(ERROR, "Error decoding tile #%d", tile_ptr->number());
            failed = true;
          }
        } else {
          pending_tiles->Decrement(false);
        }
      }
      pending_workers.Decrement(!failed);
    });
  }
  // Have the current thread partake in tile decoding.
  int index;
  while ((index = tile_counter.fetch_add(1, std::memory_order_relaxed)) <
         tile_count) {
    if (!tile_decoding_failed) {
      const auto& tile_ptr = tiles[index];
      if (!tile_ptr->ParseAndDecode()) {
        LIBGAV1_DLOG(ERROR, "Error decoding tile #%d", tile_ptr->number());
        tile_decoding_failed = true;
      }
    } else {
      pending_tiles->Decrement(false);
    }
  }
  // Wait until all the workers are done. This ensures that all the tiles have
  // been parsed.
  tile_decoding_failed |= !pending_workers.Wait();
  // Wait until all the tiles have been decoded.
  tile_decoding_failed |= !pending_tiles->Wait();
  if (tile_decoding_failed) return kStatusUnknownError;
  assert(threading_strategy.post_filter_thread_pool() != nullptr);
  post_filter->ApplyFilteringThreaded();
  return kStatusOk;
}

StatusCode DecodeTilesFrameParallel(
    const ObuSequenceHeader& sequence_header,
    const ObuFrameHeader& frame_header,
    const Vector<std::unique_ptr<Tile>>& tiles,
    const SymbolDecoderContext& saved_symbol_decoder_context,
    const SegmentationMap* const prev_segment_ids,
    FrameScratchBuffer* const frame_scratch_buffer,
    PostFilter* const post_filter, RefCountedBuffer* const current_frame) {
  // Parse the frame.
  for (const auto& tile : tiles) {
    if (!tile->Parse()) {
      LIBGAV1_DLOG(ERROR, "Failed to parse tile number: %d\n", tile->number());
      return kStatusUnknownError;
    }
  }
  if (frame_header.enable_frame_end_update_cdf) {
    frame_scratch_buffer->symbol_decoder_context = saved_symbol_decoder_context;
  }
  current_frame->SetFrameContext(frame_scratch_buffer->symbol_decoder_context);
  SetSegmentationMap(frame_header, prev_segment_ids, current_frame);
  // Mark frame as parsed.
  current_frame->SetFrameState(kFrameStateParsed);
  std::unique_ptr<TileScratchBuffer> tile_scratch_buffer =
      frame_scratch_buffer->tile_scratch_buffer_pool.Get();
  if (tile_scratch_buffer == nullptr) {
    return kStatusOutOfMemory;
  }
  const int block_width4x4 = sequence_header.use_128x128_superblock ? 32 : 16;
  // Decode in superblock row order (inter prediction in the Tile class will
  // block until the required superblocks in the reference frame are decoded).
  for (int row4x4 = 0; row4x4 < frame_header.rows4x4;
       row4x4 += block_width4x4) {
    for (const auto& tile_ptr : tiles) {
      if (!tile_ptr->ProcessSuperBlockRow<kProcessingModeDecodeOnly, false>(
              row4x4, tile_scratch_buffer.get())) {
        LIBGAV1_DLOG(ERROR, "Failed to decode tile number: %d\n",
                     tile_ptr->number());
        return kStatusUnknownError;
      }
    }
    const int progress_row = post_filter->ApplyFilteringForOneSuperBlockRow(
        row4x4, block_width4x4, row4x4 + block_width4x4 >= frame_header.rows4x4,
        /*do_deblock=*/true);
    if (progress_row >= 0) {
      current_frame->SetProgress(progress_row);
    }
  }
  // Mark frame as decoded (we no longer care about row-level progress since the
  // entire frame has been decoded).
  current_frame->SetFrameState(kFrameStateDecoded);
  frame_scratch_buffer->tile_scratch_buffer_pool.Release(
      std::move(tile_scratch_buffer));
  return kStatusOk;
}

// Helper function used by DecodeTilesThreadedFrameParallel. Applies the
// deblocking filter for tile boundaries for the superblock row at |row4x4|.
void ApplyDeblockingFilterForTileBoundaries(
    PostFilter* const post_filter, const std::unique_ptr<Tile>* tile_row_base,
    const ObuFrameHeader& frame_header, int row4x4, int block_width4x4,
    int tile_columns, bool decode_entire_tiles_in_worker_threads) {
  // Apply vertical deblock filtering for the first 64 columns of each tile.
  for (int tile_column = 0; tile_column < tile_columns; ++tile_column) {
    const Tile& tile = *tile_row_base[tile_column];
    post_filter->ApplyDeblockFilter(
        kLoopFilterTypeVertical, row4x4, tile.column4x4_start(),
        tile.column4x4_start() + kNum4x4InLoopFilterUnit, block_width4x4);
  }
  if (decode_entire_tiles_in_worker_threads &&
      row4x4 == tile_row_base[0]->row4x4_start()) {
    // This is the first superblock row of a tile row. In this case, apply
    // horizontal deblock filtering for the entire superblock row.
    post_filter->ApplyDeblockFilter(kLoopFilterTypeHorizontal, row4x4, 0,
                                    frame_header.columns4x4, block_width4x4);
  } else {
    // Apply horizontal deblock filtering for the first 64 columns of the
    // first tile.
    const Tile& first_tile = *tile_row_base[0];
    post_filter->ApplyDeblockFilter(
        kLoopFilterTypeHorizontal, row4x4, first_tile.column4x4_start(),
        first_tile.column4x4_start() + kNum4x4InLoopFilterUnit, block_width4x4);
    // Apply horizontal deblock filtering for the last 64 columns of the
    // previous tile and the first 64 columns of the current tile.
    for (int tile_column = 1; tile_column < tile_columns; ++tile_column) {
      const Tile& tile = *tile_row_base[tile_column];
      // If the previous tile has more than 64 columns, then include those
      // for the horizontal deblock.
      const Tile& previous_tile = *tile_row_base[tile_column - 1];
      const int column4x4_start =
          tile.column4x4_start() -
          ((tile.column4x4_start() - kNum4x4InLoopFilterUnit !=
            previous_tile.column4x4_start())
               ? kNum4x4InLoopFilterUnit
               : 0);
      post_filter->ApplyDeblockFilter(
          kLoopFilterTypeHorizontal, row4x4, column4x4_start,
          tile.column4x4_start() + kNum4x4InLoopFilterUnit, block_width4x4);
    }
    // Apply horizontal deblock filtering for the last 64 columns of the
    // last tile.
    const Tile& last_tile = *tile_row_base[tile_columns - 1];
    // Identify the last column4x4 value and do horizontal filtering for
    // that column4x4. The value of last column4x4 is the nearest multiple
    // of 16 that is before tile.column4x4_end().
    const int column4x4_start = (last_tile.column4x4_end() - 1) & ~15;
    // If column4x4_start is the same as tile.column4x4_start() then it
    // means that the last tile has <= 64 columns. So there is nothing left
    // to deblock (since it was already deblocked in the loop above).
    if (column4x4_start != last_tile.column4x4_start()) {
      post_filter->ApplyDeblockFilter(
          kLoopFilterTypeHorizontal, row4x4, column4x4_start,
          last_tile.column4x4_end(), block_width4x4);
    }
  }
}

// Helper function used by DecodeTilesThreadedFrameParallel. Decodes the
// superblock row starting at |row4x4| for tile at index |tile_index| in the
// list of tiles |tiles|. If the decoding is successful, then it does the
// following:
//   * Schedule the next superblock row in the current tile column for decoding
//     (the next superblock row may be in a different tile than the current
//     one).
//   * If an entire superblock row of the frame has been decoded, it notifies
//     the waiters (if there are any).
void DecodeSuperBlockRowInTile(
    const Vector<std::unique_ptr<Tile>>& tiles, size_t tile_index, int row4x4,
    const int superblock_size4x4, const int tile_columns,
    const int superblock_rows, FrameScratchBuffer* const frame_scratch_buffer,
    PostFilter* const post_filter, BlockingCounter* const pending_jobs) {
  std::unique_ptr<TileScratchBuffer> scratch_buffer =
      frame_scratch_buffer->tile_scratch_buffer_pool.Get();
  if (scratch_buffer == nullptr) {
    SetFailureAndNotifyAll(frame_scratch_buffer, superblock_rows);
    return;
  }
  Tile& tile = *tiles[tile_index];
  const bool ok = tile.ProcessSuperBlockRow<kProcessingModeDecodeOnly, false>(
      row4x4, scratch_buffer.get());
  frame_scratch_buffer->tile_scratch_buffer_pool.Release(
      std::move(scratch_buffer));
  if (!ok) {
    SetFailureAndNotifyAll(frame_scratch_buffer, superblock_rows);
    return;
  }
  if (post_filter->DoDeblock()) {
    // Apply vertical deblock filtering for all the columns in this tile except
    // for the first 64 columns.
    post_filter->ApplyDeblockFilter(
        kLoopFilterTypeVertical, row4x4,
        tile.column4x4_start() + kNum4x4InLoopFilterUnit, tile.column4x4_end(),
        superblock_size4x4);
    // Apply horizontal deblock filtering for all the columns in this tile
    // except for the first and the last 64 columns.
    // Note about the last tile of each row: For the last tile, column4x4_end
    // may not be a multiple of 16. In that case it is still okay to simply
    // subtract 16 since ApplyDeblockFilter() will only do the filters in
    // increments of 64 columns (or 32 columns for chroma with subsampling).
    post_filter->ApplyDeblockFilter(
        kLoopFilterTypeHorizontal, row4x4,
        tile.column4x4_start() + kNum4x4InLoopFilterUnit,
        tile.column4x4_end() - kNum4x4InLoopFilterUnit, superblock_size4x4);
  }
  const int superblock_size4x4_log2 = FloorLog2(superblock_size4x4);
  const int index = row4x4 >> superblock_size4x4_log2;
  int* const superblock_row_progress =
      frame_scratch_buffer->superblock_row_progress.get();
  std::condition_variable* const superblock_row_progress_condvar =
      frame_scratch_buffer->superblock_row_progress_condvar.get();
  bool notify;
  {
    std::lock_guard<std::mutex> lock(
        frame_scratch_buffer->superblock_row_mutex);
    notify = ++superblock_row_progress[index] == tile_columns;
  }
  if (notify) {
    // We are done decoding this superblock row. Notify the post filtering
    // thread.
    superblock_row_progress_condvar[index].notify_one();
  }
  // Schedule the next superblock row (if one exists).
  ThreadPool& thread_pool =
      *frame_scratch_buffer->threading_strategy.thread_pool();
  const int next_row4x4 = row4x4 + superblock_size4x4;
  if (!tile.IsRow4x4Inside(next_row4x4)) {
    tile_index += tile_columns;
  }
  if (tile_index >= tiles.size()) return;
  pending_jobs->IncrementBy(1);
  thread_pool.Schedule([&tiles, tile_index, next_row4x4, superblock_size4x4,
                        tile_columns, superblock_rows, frame_scratch_buffer,
                        post_filter, pending_jobs]() {
    DecodeSuperBlockRowInTile(tiles, tile_index, next_row4x4,
                              superblock_size4x4, tile_columns, superblock_rows,
                              frame_scratch_buffer, post_filter, pending_jobs);
    pending_jobs->Decrement();
  });
}

StatusCode DecodeTilesThreadedFrameParallel(
    const ObuSequenceHeader& sequence_header,
    const ObuFrameHeader& frame_header,
    const Vector<std::unique_ptr<Tile>>& tiles,
    const SymbolDecoderContext& saved_symbol_decoder_context,
    const SegmentationMap* const prev_segment_ids,
    FrameScratchBuffer* const frame_scratch_buffer,
    PostFilter* const post_filter, RefCountedBuffer* const current_frame) {
  // Parse the frame.
  ThreadPool& thread_pool =
      *frame_scratch_buffer->threading_strategy.thread_pool();
  std::atomic<int> tile_counter(0);
  const int tile_count = static_cast<int>(tiles.size());
  const int num_workers = thread_pool.num_threads();
  BlockingCounterWithStatus parse_workers(num_workers);
  // Submit tile parsing jobs to the thread pool.
  for (int i = 0; i < num_workers; ++i) {
    thread_pool.Schedule([&tiles, tile_count, &tile_counter, &parse_workers]() {
      bool failed = false;
      int index;
      while ((index = tile_counter.fetch_add(1, std::memory_order_relaxed)) <
             tile_count) {
        if (!failed) {
          const auto& tile_ptr = tiles[index];
          if (!tile_ptr->Parse()) {
            LIBGAV1_DLOG(ERROR, "Error parsing tile #%d", tile_ptr->number());
            failed = true;
          }
        }
      }
      parse_workers.Decrement(!failed);
    });
  }

  // Have the current thread participate in parsing.
  bool failed = false;
  int index;
  while ((index = tile_counter.fetch_add(1, std::memory_order_relaxed)) <
         tile_count) {
    if (!failed) {
      const auto& tile_ptr = tiles[index];
      if (!tile_ptr->Parse()) {
        LIBGAV1_DLOG(ERROR, "Error parsing tile #%d", tile_ptr->number());
        failed = true;
      }
    }
  }

  // Wait until all the parse workers are done. This ensures that all the tiles
  // have been parsed.
  if (!parse_workers.Wait() || failed) {
    return kLibgav1StatusUnknownError;
  }
  if (frame_header.enable_frame_end_update_cdf) {
    frame_scratch_buffer->symbol_decoder_context = saved_symbol_decoder_context;
  }
  current_frame->SetFrameContext(frame_scratch_buffer->symbol_decoder_context);
  SetSegmentationMap(frame_header, prev_segment_ids, current_frame);
  current_frame->SetFrameState(kFrameStateParsed);

  // Decode the frame.
  const int block_width4x4 = sequence_header.use_128x128_superblock ? 32 : 16;
  const int block_width4x4_log2 =
      sequence_header.use_128x128_superblock ? 5 : 4;
  const int superblock_rows =
      (frame_header.rows4x4 + block_width4x4 - 1) >> block_width4x4_log2;
  if (!frame_scratch_buffer->superblock_row_progress.Resize(superblock_rows) ||
      !frame_scratch_buffer->superblock_row_progress_condvar.Resize(
          superblock_rows)) {
    return kLibgav1StatusOutOfMemory;
  }
  int* const superblock_row_progress =
      frame_scratch_buffer->superblock_row_progress.get();
  memset(superblock_row_progress, 0,
         superblock_rows * sizeof(superblock_row_progress[0]));
  frame_scratch_buffer->tile_decoding_failed = false;
  const int tile_columns = frame_header.tile_info.tile_columns;
  const bool decode_entire_tiles_in_worker_threads =
      num_workers >= tile_columns;
  BlockingCounter pending_jobs(
      decode_entire_tiles_in_worker_threads ? num_workers : tile_columns);
  if (decode_entire_tiles_in_worker_threads) {
    // Submit tile decoding jobs to the thread pool.
    tile_counter = 0;
    for (int i = 0; i < num_workers; ++i) {
      thread_pool.Schedule([&tiles, tile_count, &tile_counter, &pending_jobs,
                            frame_scratch_buffer, superblock_rows]() {
        bool failed = false;
        int index;
        while ((index = tile_counter.fetch_add(1, std::memory_order_relaxed)) <
               tile_count) {
          if (failed) continue;
          const auto& tile_ptr = tiles[index];
          if (!tile_ptr->Decode(
                  &frame_scratch_buffer->superblock_row_mutex,
                  frame_scratch_buffer->superblock_row_progress.get(),
                  frame_scratch_buffer->superblock_row_progress_condvar
                      .get())) {
            LIBGAV1_DLOG(ERROR, "Error decoding tile #%d", tile_ptr->number());
            failed = true;
            SetFailureAndNotifyAll(frame_scratch_buffer, superblock_rows);
          }
        }
        pending_jobs.Decrement();
      });
    }
  } else {
    // Schedule the jobs for first tile row.
    for (int tile_index = 0; tile_index < tile_columns; ++tile_index) {
      thread_pool.Schedule([&tiles, tile_index, block_width4x4, tile_columns,
                            superblock_rows, frame_scratch_buffer, post_filter,
                            &pending_jobs]() {
        DecodeSuperBlockRowInTile(
            tiles, tile_index, 0, block_width4x4, tile_columns, superblock_rows,
            frame_scratch_buffer, post_filter, &pending_jobs);
        pending_jobs.Decrement();
      });
    }
  }

  // Current thread will do the post filters.
  std::condition_variable* const superblock_row_progress_condvar =
      frame_scratch_buffer->superblock_row_progress_condvar.get();
  const std::unique_ptr<Tile>* tile_row_base = &tiles[0];
  for (int row4x4 = 0, index = 0; row4x4 < frame_header.rows4x4;
       row4x4 += block_width4x4, ++index) {
    if (!tile_row_base[0]->IsRow4x4Inside(row4x4)) {
      tile_row_base += tile_columns;
    }
    {
      std::unique_lock<std::mutex> lock(
          frame_scratch_buffer->superblock_row_mutex);
      while (superblock_row_progress[index] != tile_columns &&
             !frame_scratch_buffer->tile_decoding_failed) {
        superblock_row_progress_condvar[index].wait(lock);
      }
      if (frame_scratch_buffer->tile_decoding_failed) break;
    }
    if (post_filter->DoDeblock()) {
      // Apply deblocking filter for the tile boundaries of this superblock row.
      // The deblocking filter for the internal blocks will be applied in the
      // tile worker threads. In this thread, we will only have to apply
      // deblocking filter for the tile boundaries.
      ApplyDeblockingFilterForTileBoundaries(
          post_filter, tile_row_base, frame_header, row4x4, block_width4x4,
          tile_columns, decode_entire_tiles_in_worker_threads);
    }
    // Apply all the post filters other than deblocking.
    const int progress_row = post_filter->ApplyFilteringForOneSuperBlockRow(
        row4x4, block_width4x4, row4x4 + block_width4x4 >= frame_header.rows4x4,
        /*do_deblock=*/false);
    if (progress_row >= 0) {
      current_frame->SetProgress(progress_row);
    }
  }
  // Wait until all the pending jobs are done. This ensures that all the tiles
  // have been decoded and wrapped up.
  pending_jobs.Wait();
  {
    std::lock_guard<std::mutex> lock(
        frame_scratch_buffer->superblock_row_mutex);
    if (frame_scratch_buffer->tile_decoding_failed) {
      return kLibgav1StatusUnknownError;
    }
  }

  current_frame->SetFrameState(kFrameStateDecoded);
  return kStatusOk;
}

}  // namespace

// static
StatusCode DecoderImpl::Create(const DecoderSettings* settings,
                               std::unique_ptr<DecoderImpl>* output) {
  if (settings->threads <= 0) {
    LIBGAV1_DLOG(ERROR, "Invalid settings->threads: %d.", settings->threads);
    return kStatusInvalidArgument;
  }
  if (settings->frame_parallel) {
    if (settings->release_input_buffer == nullptr) {
      LIBGAV1_DLOG(ERROR,
                   "release_input_buffer callback must not be null when "
                   "frame_parallel is true.");
      return kStatusInvalidArgument;
    }
  }
  std::unique_ptr<DecoderImpl> impl(new (std::nothrow) DecoderImpl(settings));
  if (impl == nullptr) {
    LIBGAV1_DLOG(ERROR, "Failed to allocate DecoderImpl.");
    return kStatusOutOfMemory;
  }
  const StatusCode status = impl->Init();
  if (status != kStatusOk) return status;
  *output = std::move(impl);
  return kStatusOk;
}

DecoderImpl::DecoderImpl(const DecoderSettings* settings)
    : buffer_pool_(settings->on_frame_buffer_size_changed,
                   settings->get_frame_buffer, settings->release_frame_buffer,
                   settings->callback_private_data),
      settings_(*settings) {
  dsp::DspInit();
}

DecoderImpl::~DecoderImpl() {
  // Clean up and wait until all the threads have stopped. We just have to pass
  // in a dummy status that is not kStatusOk or kStatusTryAgain to trigger the
  // path that clears all the threads and structs.
  SignalFailure(kStatusUnknownError);
  // Release any other frame buffer references that we may be holding on to.
  ReleaseOutputFrame();
  output_frame_queue_.Clear();
  for (auto& reference_frame : state_.reference_frame) {
    reference_frame = nullptr;
  }
}

StatusCode DecoderImpl::Init() {
  if (!output_frame_queue_.Init(kMaxLayers)) {
    LIBGAV1_DLOG(ERROR, "output_frame_queue_.Init() failed.");
    return kStatusOutOfMemory;
  }
  return kStatusOk;
}

StatusCode DecoderImpl::InitializeFrameThreadPoolAndTemporalUnitQueue(
    const uint8_t* data, size_t size) {
  is_frame_parallel_ = false;
  if (settings_.frame_parallel) {
    DecoderState state;
    std::unique_ptr<ObuParser> obu(new (std::nothrow) ObuParser(
        data, size, settings_.operating_point, &buffer_pool_, &state));
    if (obu == nullptr) {
      LIBGAV1_DLOG(ERROR, "Failed to allocate OBU parser.");
      return kStatusOutOfMemory;
    }
    RefCountedBufferPtr current_frame;
    const StatusCode status = obu->ParseOneFrame(&current_frame);
    if (status != kStatusOk) {
      LIBGAV1_DLOG(ERROR, "Failed to parse OBU.");
      return status;
    }
    current_frame = nullptr;
    // We assume that the first frame that was parsed will contain the frame
    // header. This assumption is usually true in practice. So we will simply
    // not use frame parallel mode if this is not the case.
    if (settings_.threads > 1 &&
        !InitializeThreadPoolsForFrameParallel(
            settings_.threads, obu->frame_header().tile_info.tile_count,
            obu->frame_header().tile_info.tile_columns, &frame_thread_pool_,
            &frame_scratch_buffer_pool_)) {
      return kStatusOutOfMemory;
    }
  }
  const int max_allowed_frames =
      (frame_thread_pool_ != nullptr) ? frame_thread_pool_->num_threads() : 1;
  assert(max_allowed_frames > 0);
  if (!temporal_units_.Init(max_allowed_frames)) {
    LIBGAV1_DLOG(ERROR, "temporal_units_.Init() failed.");
    return kStatusOutOfMemory;
  }
  is_frame_parallel_ = frame_thread_pool_ != nullptr;
  return kStatusOk;
}

StatusCode DecoderImpl::EnqueueFrame(const uint8_t* data, size_t size,
                                     int64_t user_private_data,
                                     void* buffer_private_data) {
  if (data == nullptr || size == 0) return kStatusInvalidArgument;
  if (HasFailure()) return kStatusUnknownError;
  if (!seen_first_frame_) {
    seen_first_frame_ = true;
    const StatusCode status =
        InitializeFrameThreadPoolAndTemporalUnitQueue(data, size);
    if (status != kStatusOk) {
      return SignalFailure(status);
    }
  }
  if (temporal_units_.Full()) {
    return kStatusTryAgain;
  }
  if (is_frame_parallel_) {
    return ParseAndSchedule(data, size, user_private_data, buffer_private_data);
  }
  TemporalUnit temporal_unit(data, size, user_private_data,
                             buffer_private_data);
  temporal_units_.Push(std::move(temporal_unit));
  return kStatusOk;
}

StatusCode DecoderImpl::SignalFailure(StatusCode status) {
  if (status == kStatusOk || status == kStatusTryAgain) return status;
  // Set the |failure_status_| first so that any pending jobs in
  // |frame_thread_pool_| will exit right away when the thread pool is being
  // released below.
  {
    std::lock_guard<std::mutex> lock(mutex_);
    failure_status_ = status;
  }
  // Make sure all waiting threads exit.
  buffer_pool_.Abort();
  frame_thread_pool_ = nullptr;
  while (!temporal_units_.Empty()) {
    if (settings_.release_input_buffer != nullptr) {
      settings_.release_input_buffer(
          settings_.callback_private_data,
          temporal_units_.Front().buffer_private_data);
    }
    temporal_units_.Pop();
  }
  return status;
}

// DequeueFrame() follows the following policy to avoid holding unnecessary
// frame buffer references in output_frame_: output_frame_ must be null when
// DequeueFrame() returns false.
StatusCode DecoderImpl::DequeueFrame(const DecoderBuffer** out_ptr) {
  if (out_ptr == nullptr) {
    LIBGAV1_DLOG(ERROR, "Invalid argument: out_ptr == nullptr.");
    return kStatusInvalidArgument;
  }
  // We assume a call to DequeueFrame() indicates that the caller is no longer
  // using the previous output frame, so we can release it.
  ReleaseOutputFrame();
  if (temporal_units_.Empty()) {
    // No input frames to decode.
    *out_ptr = nullptr;
    return kStatusNothingToDequeue;
  }
  TemporalUnit& temporal_unit = temporal_units_.Front();
  if (!is_frame_parallel_) {
    // If |output_frame_queue_| is not empty, then return the first frame from
    // that queue.
    if (!output_frame_queue_.Empty()) {
      RefCountedBufferPtr frame = std::move(output_frame_queue_.Front());
      output_frame_queue_.Pop();
      buffer_.user_private_data = temporal_unit.user_private_data;
      if (output_frame_queue_.Empty()) {
        temporal_units_.Pop();
      }
      const StatusCode status = CopyFrameToOutputBuffer(frame);
      if (status != kStatusOk) {
        return status;
      }
      *out_ptr = &buffer_;
      return kStatusOk;
    }
    // Decode the next available temporal unit and return.
    const StatusCode status = DecodeTemporalUnit(temporal_unit, out_ptr);
    if (status != kStatusOk) {
      // In case of failure, discard all the output frames that we may be
      // holding on references to.
      output_frame_queue_.Clear();
    }
    if (settings_.release_input_buffer != nullptr) {
      settings_.release_input_buffer(settings_.callback_private_data,
                                     temporal_unit.buffer_private_data);
    }
    if (output_frame_queue_.Empty()) {
      temporal_units_.Pop();
    }
    return status;
  }
  {
    std::unique_lock<std::mutex> lock(mutex_);
    if (settings_.blocking_dequeue) {
      while (!temporal_unit.decoded && failure_status_ == kStatusOk) {
        decoded_condvar_.wait(lock);
      }
    } else {
      if (!temporal_unit.decoded && failure_status_ == kStatusOk) {
        return kStatusTryAgain;
      }
    }
    if (failure_status_ != kStatusOk) {
      const StatusCode failure_status = failure_status_;
      lock.unlock();
      return SignalFailure(failure_status);
    }
  }
  if (settings_.release_input_buffer != nullptr &&
      !temporal_unit.released_input_buffer) {
    temporal_unit.released_input_buffer = true;
    settings_.release_input_buffer(settings_.callback_private_data,
                                   temporal_unit.buffer_private_data);
  }
  if (temporal_unit.status != kStatusOk) {
    temporal_units_.Pop();
    return SignalFailure(temporal_unit.status);
  }
  if (!temporal_unit.has_displayable_frame) {
    *out_ptr = nullptr;
    temporal_units_.Pop();
    return kStatusOk;
  }
  assert(temporal_unit.output_layer_count > 0);
  StatusCode status = CopyFrameToOutputBuffer(
      temporal_unit.output_layers[temporal_unit.output_layer_count - 1].frame);
  temporal_unit.output_layers[temporal_unit.output_layer_count - 1].frame =
      nullptr;
  if (status != kStatusOk) {
    temporal_units_.Pop();
    return SignalFailure(status);
  }
  buffer_.user_private_data = temporal_unit.user_private_data;
  *out_ptr = &buffer_;
  if (--temporal_unit.output_layer_count == 0) {
    temporal_units_.Pop();
  }
  return kStatusOk;
}

StatusCode DecoderImpl::ParseAndSchedule(const uint8_t* data, size_t size,
                                         int64_t user_private_data,
                                         void* buffer_private_data) {
  TemporalUnit temporal_unit(data, size, user_private_data,
                             buffer_private_data);
  std::unique_ptr<ObuParser> obu(new (std::nothrow) ObuParser(
      temporal_unit.data, temporal_unit.size, settings_.operating_point,
      &buffer_pool_, &state_));
  if (obu == nullptr) {
    LIBGAV1_DLOG(ERROR, "Failed to allocate OBU parser.");
    return kStatusOutOfMemory;
  }
  if (has_sequence_header_) {
    obu->set_sequence_header(sequence_header_);
  }
  StatusCode status;
  int position_in_temporal_unit = 0;
  while (obu->HasData()) {
    RefCountedBufferPtr current_frame;
    status = obu->ParseOneFrame(&current_frame);
    if (status != kStatusOk) {
      LIBGAV1_DLOG(ERROR, "Failed to parse OBU.");
      return status;
    }
    if (!MaybeInitializeQuantizerMatrix(obu->frame_header())) {
      LIBGAV1_DLOG(ERROR, "InitializeQuantizerMatrix() failed.");
      return kStatusOutOfMemory;
    }
    if (!MaybeInitializeWedgeMasks(obu->frame_header().frame_type)) {
      LIBGAV1_DLOG(ERROR, "InitializeWedgeMasks() failed.");
      return kStatusOutOfMemory;
    }
    if (IsNewSequenceHeader(*obu)) {
      const ObuSequenceHeader& sequence_header = obu->sequence_header();
      const Libgav1ImageFormat image_format =
          ComposeImageFormat(sequence_header.color_config.is_monochrome,
                             sequence_header.color_config.subsampling_x,
                             sequence_header.color_config.subsampling_y);
      const int max_bottom_border = GetBottomBorderPixels(
          /*do_cdef=*/true, /*do_restoration=*/true,
          /*do_superres=*/true, sequence_header.color_config.subsampling_y);
      // TODO(vigneshv): This may not be the right place to call this callback
      // for the frame parallel case. Investigate and fix it.
      if (!buffer_pool_.OnFrameBufferSizeChanged(
              sequence_header.color_config.bitdepth, image_format,
              sequence_header.max_frame_width, sequence_header.max_frame_height,
              kBorderPixels, kBorderPixels, kBorderPixels, max_bottom_border)) {
        LIBGAV1_DLOG(ERROR, "buffer_pool_.OnFrameBufferSizeChanged failed.");
        return kStatusUnknownError;
      }
    }
    // This can happen when there are multiple spatial/temporal layers and if
    // all the layers are outside the current operating point.
    if (current_frame == nullptr) {
      continue;
    }
    // Note that we cannot set EncodedFrame.temporal_unit here. It will be set
    // in the code below after |temporal_unit| is std::move'd into the
    // |temporal_units_| queue.
    if (!temporal_unit.frames.emplace_back(obu.get(), state_, current_frame,
                                           position_in_temporal_unit++)) {
      LIBGAV1_DLOG(ERROR, "temporal_unit.frames.emplace_back failed.");
      return kStatusOutOfMemory;
    }
    state_.UpdateReferenceFrames(current_frame,
                                 obu->frame_header().refresh_frame_flags);
  }
  // This function cannot fail after this point. So it is okay to move the
  // |temporal_unit| into |temporal_units_| queue.
  temporal_units_.Push(std::move(temporal_unit));
  if (temporal_units_.Back().frames.empty()) {
    std::lock_guard<std::mutex> lock(mutex_);
    temporal_units_.Back().has_displayable_frame = false;
    temporal_units_.Back().decoded = true;
    return kStatusOk;
  }
  for (auto& frame : temporal_units_.Back().frames) {
    EncodedFrame* const encoded_frame = &frame;
    encoded_frame->temporal_unit = &temporal_units_.Back();
    frame_thread_pool_->Schedule([this, encoded_frame]() {
      if (HasFailure()) return;
      const StatusCode status = DecodeFrame(encoded_frame);
      encoded_frame->state = {};
      encoded_frame->frame = nullptr;
      TemporalUnit& temporal_unit = *encoded_frame->temporal_unit;
      std::lock_guard<std::mutex> lock(mutex_);
      if (failure_status_ != kStatusOk) return;
      // temporal_unit's status defaults to kStatusOk. So we need to set it only
      // on error. If |failure_status_| is not kStatusOk at this point, it means
      // that there has already been a failure. So we don't care about this
      // subsequent failure.  We will simply return the error code of the first
      // failure.
      if (status != kStatusOk) {
        temporal_unit.status = status;
        if (failure_status_ == kStatusOk) {
          failure_status_ = status;
        }
      }
      temporal_unit.decoded =
          ++temporal_unit.decoded_count == temporal_unit.frames.size();
      if (temporal_unit.decoded && settings_.output_all_layers &&
          temporal_unit.output_layer_count > 1) {
        std::sort(
            temporal_unit.output_layers,
            temporal_unit.output_layers + temporal_unit.output_layer_count);
      }
      if (temporal_unit.decoded || failure_status_ != kStatusOk) {
        decoded_condvar_.notify_one();
      }
    });
  }
  return kStatusOk;
}

StatusCode DecoderImpl::DecodeFrame(EncodedFrame* const encoded_frame) {
  const ObuSequenceHeader& sequence_header = encoded_frame->sequence_header;
  const ObuFrameHeader& frame_header = encoded_frame->frame_header;
  RefCountedBufferPtr current_frame = std::move(encoded_frame->frame);

  std::unique_ptr<FrameScratchBuffer> frame_scratch_buffer =
      frame_scratch_buffer_pool_.Get();
  if (frame_scratch_buffer == nullptr) {
    LIBGAV1_DLOG(ERROR, "Error when getting FrameScratchBuffer.");
    return kStatusOutOfMemory;
  }
  // |frame_scratch_buffer| will be released when this local variable goes out
  // of scope (i.e.) on any return path in this function.
  FrameScratchBufferReleaser frame_scratch_buffer_releaser(
      &frame_scratch_buffer_pool_, &frame_scratch_buffer);

  StatusCode status;
  if (!frame_header.show_existing_frame) {
    if (encoded_frame->tile_buffers.empty()) {
      // This means that the last call to ParseOneFrame() did not actually
      // have any tile groups. This could happen in rare cases (for example,
      // if there is a Metadata OBU after the TileGroup OBU). We currently do
      // not have a reason to handle those cases, so we simply continue.
      return kStatusOk;
    }
    status = DecodeTiles(sequence_header, frame_header,
                         encoded_frame->tile_buffers, encoded_frame->state,
                         frame_scratch_buffer.get(), current_frame.get());
    if (status != kStatusOk) {
      return status;
    }
  } else {
    if (!current_frame->WaitUntilDecoded()) {
      return kStatusUnknownError;
    }
  }
  if (!frame_header.show_frame && !frame_header.show_existing_frame) {
    // This frame is not displayable. Not an error.
    return kStatusOk;
  }
  RefCountedBufferPtr film_grain_frame;
  status = ApplyFilmGrain(
      sequence_header, frame_header, current_frame, &film_grain_frame,
      frame_scratch_buffer->threading_strategy.thread_pool());
  if (status != kStatusOk) {
    return status;
  }

  TemporalUnit& temporal_unit = *encoded_frame->temporal_unit;
  std::lock_guard<std::mutex> lock(mutex_);
  if (temporal_unit.has_displayable_frame && !settings_.output_all_layers) {
    assert(temporal_unit.output_frame_position >= 0);
    // A displayable frame was already found in this temporal unit. This can
    // happen if there are multiple spatial/temporal layers. Since
    // |settings_.output_all_layers| is false, we will output only the last
    // displayable frame.
    if (temporal_unit.output_frame_position >
        encoded_frame->position_in_temporal_unit) {
      return kStatusOk;
    }
    // Replace any output frame that we may have seen before with the current
    // frame.
    assert(temporal_unit.output_layer_count == 1);
    --temporal_unit.output_layer_count;
  }
  temporal_unit.has_displayable_frame = true;
  temporal_unit.output_layers[temporal_unit.output_layer_count].frame =
      std::move(film_grain_frame);
  temporal_unit.output_layers[temporal_unit.output_layer_count]
      .position_in_temporal_unit = encoded_frame->position_in_temporal_unit;
  ++temporal_unit.output_layer_count;
  temporal_unit.output_frame_position =
      encoded_frame->position_in_temporal_unit;
  return kStatusOk;
}

StatusCode DecoderImpl::DecodeTemporalUnit(const TemporalUnit& temporal_unit,
                                           const DecoderBuffer** out_ptr) {
  std::unique_ptr<ObuParser> obu(new (std::nothrow) ObuParser(
      temporal_unit.data, temporal_unit.size, settings_.operating_point,
      &buffer_pool_, &state_));
  if (obu == nullptr) {
    LIBGAV1_DLOG(ERROR, "Failed to allocate OBU parser.");
    return kStatusOutOfMemory;
  }
  if (has_sequence_header_) {
    obu->set_sequence_header(sequence_header_);
  }
  StatusCode status;
  std::unique_ptr<FrameScratchBuffer> frame_scratch_buffer =
      frame_scratch_buffer_pool_.Get();
  if (frame_scratch_buffer == nullptr) {
    LIBGAV1_DLOG(ERROR, "Error when getting FrameScratchBuffer.");
    return kStatusOutOfMemory;
  }
  // |frame_scratch_buffer| will be released when this local variable goes out
  // of scope (i.e.) on any return path in this function.
  FrameScratchBufferReleaser frame_scratch_buffer_releaser(
      &frame_scratch_buffer_pool_, &frame_scratch_buffer);

  while (obu->HasData()) {
    RefCountedBufferPtr current_frame;
    status = obu->ParseOneFrame(&current_frame);
    if (status != kStatusOk) {
      LIBGAV1_DLOG(ERROR, "Failed to parse OBU.");
      return status;
    }
    if (!MaybeInitializeQuantizerMatrix(obu->frame_header())) {
      LIBGAV1_DLOG(ERROR, "InitializeQuantizerMatrix() failed.");
      return kStatusOutOfMemory;
    }
    if (!MaybeInitializeWedgeMasks(obu->frame_header().frame_type)) {
      LIBGAV1_DLOG(ERROR, "InitializeWedgeMasks() failed.");
      return kStatusOutOfMemory;
    }
    if (IsNewSequenceHeader(*obu)) {
      const ObuSequenceHeader& sequence_header = obu->sequence_header();
      const Libgav1ImageFormat image_format =
          ComposeImageFormat(sequence_header.color_config.is_monochrome,
                             sequence_header.color_config.subsampling_x,
                             sequence_header.color_config.subsampling_y);
      const int max_bottom_border = GetBottomBorderPixels(
          /*do_cdef=*/true, /*do_restoration=*/true,
          /*do_superres=*/true, sequence_header.color_config.subsampling_y);
      if (!buffer_pool_.OnFrameBufferSizeChanged(
              sequence_header.color_config.bitdepth, image_format,
              sequence_header.max_frame_width, sequence_header.max_frame_height,
              kBorderPixels, kBorderPixels, kBorderPixels, max_bottom_border)) {
        LIBGAV1_DLOG(ERROR, "buffer_pool_.OnFrameBufferSizeChanged failed.");
        return kStatusUnknownError;
      }
    }
    if (!obu->frame_header().show_existing_frame) {
      if (obu->tile_buffers().empty()) {
        // This means that the last call to ParseOneFrame() did not actually
        // have any tile groups. This could happen in rare cases (for example,
        // if there is a Metadata OBU after the TileGroup OBU). We currently do
        // not have a reason to handle those cases, so we simply continue.
        continue;
      }
      status = DecodeTiles(obu->sequence_header(), obu->frame_header(),
                           obu->tile_buffers(), state_,
                           frame_scratch_buffer.get(), current_frame.get());
      if (status != kStatusOk) {
        return status;
      }
    }
    state_.UpdateReferenceFrames(current_frame,
                                 obu->frame_header().refresh_frame_flags);
    if (obu->frame_header().show_frame ||
        obu->frame_header().show_existing_frame) {
      if (!output_frame_queue_.Empty() && !settings_.output_all_layers) {
        // There is more than one displayable frame in the current operating
        // point and |settings_.output_all_layers| is false. In this case, we
        // simply return the last displayable frame as the output frame and
        // ignore the rest.
        assert(output_frame_queue_.Size() == 1);
        output_frame_queue_.Pop();
      }
      RefCountedBufferPtr film_grain_frame;
      status = ApplyFilmGrain(
          obu->sequence_header(), obu->frame_header(), current_frame,
          &film_grain_frame,
          frame_scratch_buffer->threading_strategy.film_grain_thread_pool());
      if (status != kStatusOk) return status;
      output_frame_queue_.Push(std::move(film_grain_frame));
    }
  }
  if (output_frame_queue_.Empty()) {
    // No displayable frame in the temporal unit. Not an error.
    *out_ptr = nullptr;
    return kStatusOk;
  }
  status = CopyFrameToOutputBuffer(output_frame_queue_.Front());
  output_frame_queue_.Pop();
  if (status != kStatusOk) {
    return status;
  }
  buffer_.user_private_data = temporal_unit.user_private_data;
  *out_ptr = &buffer_;
  return kStatusOk;
}

StatusCode DecoderImpl::CopyFrameToOutputBuffer(
    const RefCountedBufferPtr& frame) {
  YuvBuffer* yuv_buffer = frame->buffer();

  buffer_.chroma_sample_position = frame->chroma_sample_position();

  if (yuv_buffer->is_monochrome()) {
    buffer_.image_format = kImageFormatMonochrome400;
  } else {
    if (yuv_buffer->subsampling_x() == 0 && yuv_buffer->subsampling_y() == 0) {
      buffer_.image_format = kImageFormatYuv444;
    } else if (yuv_buffer->subsampling_x() == 1 &&
               yuv_buffer->subsampling_y() == 0) {
      buffer_.image_format = kImageFormatYuv422;
    } else if (yuv_buffer->subsampling_x() == 1 &&
               yuv_buffer->subsampling_y() == 1) {
      buffer_.image_format = kImageFormatYuv420;
    } else {
      LIBGAV1_DLOG(ERROR,
                   "Invalid chroma subsampling values: cannot determine buffer "
                   "image format.");
      return kStatusInvalidArgument;
    }
  }
  buffer_.color_range = sequence_header_.color_config.color_range;
  buffer_.color_primary = sequence_header_.color_config.color_primary;
  buffer_.transfer_characteristics =
      sequence_header_.color_config.transfer_characteristics;
  buffer_.matrix_coefficients =
      sequence_header_.color_config.matrix_coefficients;

  buffer_.bitdepth = yuv_buffer->bitdepth();
  const int num_planes =
      yuv_buffer->is_monochrome() ? kMaxPlanesMonochrome : kMaxPlanes;
  int plane = kPlaneY;
  for (; plane < num_planes; ++plane) {
    buffer_.stride[plane] = yuv_buffer->stride(plane);
    buffer_.plane[plane] = yuv_buffer->data(plane);
    buffer_.displayed_width[plane] = yuv_buffer->width(plane);
    buffer_.displayed_height[plane] = yuv_buffer->height(plane);
  }
  for (; plane < kMaxPlanes; ++plane) {
    buffer_.stride[plane] = 0;
    buffer_.plane[plane] = nullptr;
    buffer_.displayed_width[plane] = 0;
    buffer_.displayed_height[plane] = 0;
  }
  buffer_.spatial_id = frame->spatial_id();
  buffer_.temporal_id = frame->temporal_id();
  buffer_.buffer_private_data = frame->buffer_private_data();
  output_frame_ = frame;
  return kStatusOk;
}

void DecoderImpl::ReleaseOutputFrame() {
  for (auto& plane : buffer_.plane) {
    plane = nullptr;
  }
  output_frame_ = nullptr;
}

StatusCode DecoderImpl::DecodeTiles(
    const ObuSequenceHeader& sequence_header,
    const ObuFrameHeader& frame_header, const Vector<TileBuffer>& tile_buffers,
    const DecoderState& state, FrameScratchBuffer* const frame_scratch_buffer,
    RefCountedBuffer* const current_frame) {
  frame_scratch_buffer->tile_scratch_buffer_pool.Reset(
      sequence_header.color_config.bitdepth);
  if (!frame_scratch_buffer->loop_restoration_info.Reset(
          &frame_header.loop_restoration, frame_header.upscaled_width,
          frame_header.height, sequence_header.color_config.subsampling_x,
          sequence_header.color_config.subsampling_y,
          sequence_header.color_config.is_monochrome)) {
    LIBGAV1_DLOG(ERROR,
                 "Failed to allocate memory for loop restoration info units.");
    return kStatusOutOfMemory;
  }
  ThreadingStrategy& threading_strategy =
      frame_scratch_buffer->threading_strategy;
  if (!is_frame_parallel_ &&
      !threading_strategy.Reset(frame_header, settings_.threads)) {
    return kStatusOutOfMemory;
  }
  const bool do_cdef =
      PostFilter::DoCdef(frame_header, settings_.post_filter_mask);
  const int num_planes = sequence_header.color_config.is_monochrome
                             ? kMaxPlanesMonochrome
                             : kMaxPlanes;
  const bool do_restoration = PostFilter::DoRestoration(
      frame_header.loop_restoration, settings_.post_filter_mask, num_planes);
  const bool do_superres =
      PostFilter::DoSuperRes(frame_header, settings_.post_filter_mask);
  // Use kBorderPixels for the left, right, and top borders. Only the bottom
  // border may need to be bigger. Cdef border is needed only if we apply Cdef
  // without multithreading.
  const int bottom_border = GetBottomBorderPixels(
      do_cdef && threading_strategy.post_filter_thread_pool() == nullptr,
      do_restoration, do_superres, sequence_header.color_config.subsampling_y);
  current_frame->set_chroma_sample_position(
      sequence_header.color_config.chroma_sample_position);
  if (!current_frame->Realloc(sequence_header.color_config.bitdepth,
                              sequence_header.color_config.is_monochrome,
                              frame_header.upscaled_width, frame_header.height,
                              sequence_header.color_config.subsampling_x,
                              sequence_header.color_config.subsampling_y,
                              /*left_border=*/kBorderPixels,
                              /*right_border=*/kBorderPixels,
                              /*top_border=*/kBorderPixels, bottom_border)) {
    LIBGAV1_DLOG(ERROR, "Failed to allocate memory for the decoder buffer.");
    return kStatusOutOfMemory;
  }
  if (frame_header.cdef.bits > 0) {
    if (!frame_scratch_buffer->cdef_index.Reset(
            DivideBy16(frame_header.rows4x4 + kMaxBlockHeight4x4),
            DivideBy16(frame_header.columns4x4 + kMaxBlockWidth4x4),
            /*zero_initialize=*/false)) {
      LIBGAV1_DLOG(ERROR, "Failed to allocate memory for cdef index.");
      return kStatusOutOfMemory;
    }
  }
  if (do_cdef) {
    if (!frame_scratch_buffer->cdef_skip.Reset(
            DivideBy2(frame_header.rows4x4 + kMaxBlockHeight4x4),
            DivideBy16(frame_header.columns4x4 + kMaxBlockWidth4x4),
            /*zero_initialize=*/true)) {
      LIBGAV1_DLOG(ERROR, "Failed to allocate memory for cdef skip.");
      return kStatusOutOfMemory;
    }
  }
  if (!frame_scratch_buffer->inter_transform_sizes.Reset(
          frame_header.rows4x4 + kMaxBlockHeight4x4,
          frame_header.columns4x4 + kMaxBlockWidth4x4,
          /*zero_initialize=*/false)) {
    LIBGAV1_DLOG(ERROR, "Failed to allocate memory for inter_transform_sizes.");
    return kStatusOutOfMemory;
  }
  if (frame_header.use_ref_frame_mvs) {
    if (!frame_scratch_buffer->motion_field.mv.Reset(
            DivideBy2(frame_header.rows4x4), DivideBy2(frame_header.columns4x4),
            /*zero_initialize=*/false) ||
        !frame_scratch_buffer->motion_field.reference_offset.Reset(
            DivideBy2(frame_header.rows4x4), DivideBy2(frame_header.columns4x4),
            /*zero_initialize=*/false)) {
      LIBGAV1_DLOG(ERROR,
                   "Failed to allocate memory for temporal motion vectors.");
      return kStatusOutOfMemory;
    }

    // For each motion vector, only mv[0] needs to be initialized to
    // kInvalidMvValue, mv[1] is not necessary to be initialized and can be
    // set to an arbitrary value. For simplicity, mv[1] is set to 0.
    // The following memory initialization of contiguous memory is very fast. It
    // is not recommended to make the initialization multi-threaded, unless the
    // memory which needs to be initialized in each thread is still contiguous.
    MotionVector invalid_mv;
    invalid_mv.mv[0] = kInvalidMvValue;
    invalid_mv.mv[1] = 0;
    MotionVector* const motion_field_mv =
        &frame_scratch_buffer->motion_field.mv[0][0];
    std::fill(motion_field_mv,
              motion_field_mv + frame_scratch_buffer->motion_field.mv.size(),
              invalid_mv);
  }

  // The addition of kMaxBlockHeight4x4 and kMaxBlockWidth4x4 is necessary so
  // that the block parameters cache can be filled in for the last row/column
  // without having to check for boundary conditions.
  if (!frame_scratch_buffer->block_parameters_holder.Reset(
          frame_header.rows4x4 + kMaxBlockHeight4x4,
          frame_header.columns4x4 + kMaxBlockWidth4x4)) {
    return kStatusOutOfMemory;
  }
  const dsp::Dsp* const dsp =
      dsp::GetDspTable(sequence_header.color_config.bitdepth);
  if (dsp == nullptr) {
    LIBGAV1_DLOG(ERROR, "Failed to get the dsp table for bitdepth %d.",
                 sequence_header.color_config.bitdepth);
    return kStatusInternalError;
  }

  const int tile_count = frame_header.tile_info.tile_count;
  assert(tile_count >= 1);
  Vector<std::unique_ptr<Tile>> tiles;
  if (!tiles.reserve(tile_count)) {
    LIBGAV1_DLOG(ERROR, "tiles.reserve(%d) failed.\n", tile_count);
    return kStatusOutOfMemory;
  }

  if (threading_strategy.row_thread_pool(0) != nullptr || is_frame_parallel_) {
    if (frame_scratch_buffer->residual_buffer_pool == nullptr) {
      frame_scratch_buffer->residual_buffer_pool.reset(
          new (std::nothrow) ResidualBufferPool(
              sequence_header.use_128x128_superblock,
              sequence_header.color_config.subsampling_x,
              sequence_header.color_config.subsampling_y,
              sequence_header.color_config.bitdepth == 8 ? sizeof(int16_t)
                                                         : sizeof(int32_t)));
      if (frame_scratch_buffer->residual_buffer_pool == nullptr) {
        LIBGAV1_DLOG(ERROR, "Failed to allocate residual buffer.\n");
        return kStatusOutOfMemory;
      }
    } else {
      frame_scratch_buffer->residual_buffer_pool->Reset(
          sequence_header.use_128x128_superblock,
          sequence_header.color_config.subsampling_x,
          sequence_header.color_config.subsampling_y,
          sequence_header.color_config.bitdepth == 8 ? sizeof(int16_t)
                                                     : sizeof(int32_t));
    }
  }

  if (threading_strategy.post_filter_thread_pool() != nullptr && do_cdef) {
    // We need to store 4 rows per 64x64 unit.
    const int num_units =
        MultiplyBy4(RightShiftWithCeiling(frame_header.rows4x4, 4));
    // subsampling_y is set to zero irrespective of the actual frame's
    // subsampling since we need to store exactly |num_units| rows of the loop
    // restoration border pixels.
    if (!frame_scratch_buffer->cdef_border.Realloc(
            sequence_header.color_config.bitdepth,
            sequence_header.color_config.is_monochrome,
            MultiplyBy4(frame_header.columns4x4), num_units,
            sequence_header.color_config.subsampling_x,
            /*subsampling_y=*/0, kBorderPixels, kBorderPixels, kBorderPixels,
            kBorderPixels, nullptr, nullptr, nullptr)) {
      return kStatusOutOfMemory;
    }
  }

  if (do_restoration &&
      (do_cdef || threading_strategy.post_filter_thread_pool() != nullptr)) {
    // We need to store 4 rows per 64x64 unit.
    const int num_units =
        MultiplyBy4(RightShiftWithCeiling(frame_header.rows4x4, 4));
    // subsampling_y is set to zero irrespective of the actual frame's
    // subsampling since we need to store exactly |num_units| rows of the loop
    // restoration border pixels.
    if (!frame_scratch_buffer->loop_restoration_border.Realloc(
            sequence_header.color_config.bitdepth,
            sequence_header.color_config.is_monochrome,
            frame_header.upscaled_width, num_units,
            sequence_header.color_config.subsampling_x,
            /*subsampling_y=*/0, kBorderPixels, kBorderPixels, kBorderPixels,
            kBorderPixels, nullptr, nullptr, nullptr)) {
      return kStatusOutOfMemory;
    }
  }

  if (do_superres) {
    const int pixel_size = sequence_header.color_config.bitdepth == 8
                               ? sizeof(uint8_t)
                               : sizeof(uint16_t);
    const int coefficients_size = kSuperResFilterTaps *
                                  Align(frame_header.upscaled_width, 16) *
                                  pixel_size;
    if (!frame_scratch_buffer->superres_coefficients[kPlaneTypeY].Resize(
            coefficients_size)) {
      LIBGAV1_DLOG(ERROR,
                   "Failed to Resize superres_coefficients[kPlaneTypeY].");
      return kStatusOutOfMemory;
    }
#if LIBGAV1_MSAN
    // Quiet SuperRes_NEON() msan warnings.
    memset(frame_scratch_buffer->superres_coefficients[kPlaneTypeY].get(), 0,
           coefficients_size);
#endif
    const int uv_coefficients_size =
        kSuperResFilterTaps *
        Align(SubsampledValue(frame_header.upscaled_width, 1), 16) * pixel_size;
    if (!sequence_header.color_config.is_monochrome &&
        sequence_header.color_config.subsampling_x != 0 &&
        !frame_scratch_buffer->superres_coefficients[kPlaneTypeUV].Resize(
            uv_coefficients_size)) {
      LIBGAV1_DLOG(ERROR,
                   "Failed to Resize superres_coefficients[kPlaneTypeUV].");
      return kStatusOutOfMemory;
    }
#if LIBGAV1_MSAN
    if (!sequence_header.color_config.is_monochrome &&
        sequence_header.color_config.subsampling_x != 0) {
      // Quiet SuperRes_NEON() msan warnings.
      memset(frame_scratch_buffer->superres_coefficients[kPlaneTypeUV].get(), 0,
             uv_coefficients_size);
    }
#endif
  }

  if (do_superres && threading_strategy.post_filter_thread_pool() != nullptr) {
    const int num_threads =
        threading_strategy.post_filter_thread_pool()->num_threads() + 1;
    // subsampling_y is set to zero irrespective of the actual frame's
    // subsampling since we need to store exactly |num_threads| rows of the
    // down-scaled pixels.
    // Left and right borders are for line extension. They are doubled for the Y
    // plane to make sure the U and V planes have enough space after possible
    // subsampling.
    if (!frame_scratch_buffer->superres_line_buffer.Realloc(
            sequence_header.color_config.bitdepth,
            sequence_header.color_config.is_monochrome,
            MultiplyBy4(frame_header.columns4x4), num_threads,
            sequence_header.color_config.subsampling_x,
            /*subsampling_y=*/0, 2 * kSuperResHorizontalBorder,
            2 * (kSuperResHorizontalBorder + kSuperResHorizontalPadding), 0, 0,
            nullptr, nullptr, nullptr)) {
      LIBGAV1_DLOG(ERROR, "Failed to resize superres line buffer.\n");
      return kStatusOutOfMemory;
    }
  }

  if (is_frame_parallel_ && !IsIntraFrame(frame_header.frame_type)) {
    // We can parse the current frame if all the reference frames have been
    // parsed.
    for (const int index : frame_header.reference_frame_index) {
      if (!state.reference_frame[index]->WaitUntilParsed()) {
        return kStatusUnknownError;
      }
    }
  }

  // If prev_segment_ids is a null pointer, it is treated as if it pointed to
  // a segmentation map containing all 0s.
  const SegmentationMap* prev_segment_ids = nullptr;
  if (frame_header.primary_reference_frame == kPrimaryReferenceNone) {
    frame_scratch_buffer->symbol_decoder_context.Initialize(
        frame_header.quantizer.base_index);
  } else {
    const int index =
        frame_header
            .reference_frame_index[frame_header.primary_reference_frame];
    assert(index != -1);
    const RefCountedBuffer* prev_frame = state.reference_frame[index].get();
    frame_scratch_buffer->symbol_decoder_context = prev_frame->FrameContext();
    if (frame_header.segmentation.enabled &&
        prev_frame->columns4x4() == frame_header.columns4x4 &&
        prev_frame->rows4x4() == frame_header.rows4x4) {
      prev_segment_ids = prev_frame->segmentation_map();
    }
  }

  // The Tile class must make use of a separate buffer to store the unfiltered
  // pixels for the intra prediction of the next superblock row. This is done
  // only when one of the following conditions are true:
  //   * is_frame_parallel_ is true.
  //   * settings_.threads == 1.
  // In the non-frame-parallel multi-threaded case, we do not run the post
  // filters in the decode loop. So this buffer need not be used.
  const bool use_intra_prediction_buffer =
      is_frame_parallel_ || settings_.threads == 1;
  if (use_intra_prediction_buffer) {
    if (!frame_scratch_buffer->intra_prediction_buffers.Resize(
            frame_header.tile_info.tile_rows)) {
      LIBGAV1_DLOG(ERROR, "Failed to Resize intra_prediction_buffers.");
      return kStatusOutOfMemory;
    }
    IntraPredictionBuffer* const intra_prediction_buffers =
        frame_scratch_buffer->intra_prediction_buffers.get();
    for (int plane = kPlaneY; plane < num_planes; ++plane) {
      const int subsampling =
          (plane == kPlaneY) ? 0 : sequence_header.color_config.subsampling_x;
      const size_t intra_prediction_buffer_size =
          ((MultiplyBy4(frame_header.columns4x4) >> subsampling) *
           (sequence_header.color_config.bitdepth == 8 ? sizeof(uint8_t)
                                                       : sizeof(uint16_t)));
      for (int tile_row = 0; tile_row < frame_header.tile_info.tile_rows;
           ++tile_row) {
        if (!intra_prediction_buffers[tile_row][plane].Resize(
                intra_prediction_buffer_size)) {
          LIBGAV1_DLOG(ERROR,
                       "Failed to allocate intra prediction buffer for tile "
                       "row %d plane %d.\n",
                       tile_row, plane);
          return kStatusOutOfMemory;
        }
      }
    }
  }

  PostFilter post_filter(frame_header, sequence_header, frame_scratch_buffer,
                         current_frame->buffer(), dsp,
                         settings_.post_filter_mask);
  SymbolDecoderContext saved_symbol_decoder_context;
  BlockingCounterWithStatus pending_tiles(tile_count);
  for (int tile_number = 0; tile_number < tile_count; ++tile_number) {
    std::unique_ptr<Tile> tile = Tile::Create(
        tile_number, tile_buffers[tile_number].data,
        tile_buffers[tile_number].size, sequence_header, frame_header,
        current_frame, state, frame_scratch_buffer, wedge_masks_,
        quantizer_matrix_, &saved_symbol_decoder_context, prev_segment_ids,
        &post_filter, dsp, threading_strategy.row_thread_pool(tile_number),
        &pending_tiles, is_frame_parallel_, use_intra_prediction_buffer);
    if (tile == nullptr) {
      LIBGAV1_DLOG(ERROR, "Failed to create tile.");
      return kStatusOutOfMemory;
    }
    tiles.push_back_unchecked(std::move(tile));
  }
  assert(tiles.size() == static_cast<size_t>(tile_count));
  if (is_frame_parallel_) {
    if (frame_scratch_buffer->threading_strategy.thread_pool() == nullptr) {
      return DecodeTilesFrameParallel(
          sequence_header, frame_header, tiles, saved_symbol_decoder_context,
          prev_segment_ids, frame_scratch_buffer, &post_filter, current_frame);
    }
    return DecodeTilesThreadedFrameParallel(
        sequence_header, frame_header, tiles, saved_symbol_decoder_context,
        prev_segment_ids, frame_scratch_buffer, &post_filter, current_frame);
  }
  StatusCode status;
  if (settings_.threads == 1) {
    status = DecodeTilesNonFrameParallel(sequence_header, frame_header, tiles,
                                         frame_scratch_buffer, &post_filter);
  } else {
    status = DecodeTilesThreadedNonFrameParallel(tiles, frame_scratch_buffer,
                                                 &post_filter, &pending_tiles);
  }
  if (status != kStatusOk) return status;
  if (frame_header.enable_frame_end_update_cdf) {
    frame_scratch_buffer->symbol_decoder_context = saved_symbol_decoder_context;
  }
  current_frame->SetFrameContext(frame_scratch_buffer->symbol_decoder_context);
  SetSegmentationMap(frame_header, prev_segment_ids, current_frame);
  return kStatusOk;
}

StatusCode DecoderImpl::ApplyFilmGrain(
    const ObuSequenceHeader& sequence_header,
    const ObuFrameHeader& frame_header,
    const RefCountedBufferPtr& displayable_frame,
    RefCountedBufferPtr* film_grain_frame, ThreadPool* thread_pool) {
  if (!sequence_header.film_grain_params_present ||
      !displayable_frame->film_grain_params().apply_grain ||
      (settings_.post_filter_mask & 0x10) == 0) {
    *film_grain_frame = displayable_frame;
    return kStatusOk;
  }
  if (!frame_header.show_existing_frame &&
      frame_header.refresh_frame_flags == 0) {
    // If show_existing_frame is true, then the current frame is a previously
    // saved reference frame. If refresh_frame_flags is nonzero, then the
    // state_.UpdateReferenceFrames() call above has saved the current frame as
    // a reference frame. Therefore, if both of these conditions are false, then
    // the current frame is not saved as a reference frame. displayable_frame
    // should hold the only reference to the current frame.
    assert(displayable_frame.use_count() == 1);
    // Add film grain noise in place.
    *film_grain_frame = displayable_frame;
  } else {
    *film_grain_frame = buffer_pool_.GetFreeBuffer();
    if (*film_grain_frame == nullptr) {
      LIBGAV1_DLOG(ERROR,
                   "Could not get film_grain_frame from the buffer pool.");
      return kStatusResourceExhausted;
    }
    if (!(*film_grain_frame)
             ->Realloc(displayable_frame->buffer()->bitdepth(),
                       displayable_frame->buffer()->is_monochrome(),
                       displayable_frame->upscaled_width(),
                       displayable_frame->frame_height(),
                       displayable_frame->buffer()->subsampling_x(),
                       displayable_frame->buffer()->subsampling_y(),
                       kBorderPixelsFilmGrain, kBorderPixelsFilmGrain,
                       kBorderPixelsFilmGrain, kBorderPixelsFilmGrain)) {
      LIBGAV1_DLOG(ERROR, "film_grain_frame->Realloc() failed.");
      return kStatusOutOfMemory;
    }
    (*film_grain_frame)
        ->set_chroma_sample_position(
            displayable_frame->chroma_sample_position());
    (*film_grain_frame)->set_spatial_id(displayable_frame->spatial_id());
    (*film_grain_frame)->set_temporal_id(displayable_frame->temporal_id());
  }
  const bool color_matrix_is_identity =
      sequence_header.color_config.matrix_coefficients ==
      kMatrixCoefficientsIdentity;
  assert(displayable_frame->buffer()->stride(kPlaneU) ==
         displayable_frame->buffer()->stride(kPlaneV));
  const int input_stride_uv = displayable_frame->buffer()->stride(kPlaneU);
  assert((*film_grain_frame)->buffer()->stride(kPlaneU) ==
         (*film_grain_frame)->buffer()->stride(kPlaneV));
  const int output_stride_uv = (*film_grain_frame)->buffer()->stride(kPlaneU);
#if LIBGAV1_MAX_BITDEPTH >= 10
  if (displayable_frame->buffer()->bitdepth() > 8) {
    FilmGrain<10> film_grain(displayable_frame->film_grain_params(),
                             displayable_frame->buffer()->is_monochrome(),
                             color_matrix_is_identity,
                             displayable_frame->buffer()->subsampling_x(),
                             displayable_frame->buffer()->subsampling_y(),
                             displayable_frame->upscaled_width(),
                             displayable_frame->frame_height(), thread_pool);
    if (!film_grain.AddNoise(
            displayable_frame->buffer()->data(kPlaneY),
            displayable_frame->buffer()->stride(kPlaneY),
            displayable_frame->buffer()->data(kPlaneU),
            displayable_frame->buffer()->data(kPlaneV), input_stride_uv,
            (*film_grain_frame)->buffer()->data(kPlaneY),
            (*film_grain_frame)->buffer()->stride(kPlaneY),
            (*film_grain_frame)->buffer()->data(kPlaneU),
            (*film_grain_frame)->buffer()->data(kPlaneV), output_stride_uv)) {
      LIBGAV1_DLOG(ERROR, "film_grain.AddNoise() failed.");
      return kStatusOutOfMemory;
    }
    return kStatusOk;
  }
#endif  // LIBGAV1_MAX_BITDEPTH >= 10
  FilmGrain<8> film_grain(displayable_frame->film_grain_params(),
                          displayable_frame->buffer()->is_monochrome(),
                          color_matrix_is_identity,
                          displayable_frame->buffer()->subsampling_x(),
                          displayable_frame->buffer()->subsampling_y(),
                          displayable_frame->upscaled_width(),
                          displayable_frame->frame_height(), thread_pool);
  if (!film_grain.AddNoise(
          displayable_frame->buffer()->data(kPlaneY),
          displayable_frame->buffer()->stride(kPlaneY),
          displayable_frame->buffer()->data(kPlaneU),
          displayable_frame->buffer()->data(kPlaneV), input_stride_uv,
          (*film_grain_frame)->buffer()->data(kPlaneY),
          (*film_grain_frame)->buffer()->stride(kPlaneY),
          (*film_grain_frame)->buffer()->data(kPlaneU),
          (*film_grain_frame)->buffer()->data(kPlaneV), output_stride_uv)) {
    LIBGAV1_DLOG(ERROR, "film_grain.AddNoise() failed.");
    return kStatusOutOfMemory;
  }
  return kStatusOk;
}

bool DecoderImpl::IsNewSequenceHeader(const ObuParser& obu) {
  if (std::find_if(obu.obu_headers().begin(), obu.obu_headers().end(),
                   [](const ObuHeader& obu_header) {
                     return obu_header.type == kObuSequenceHeader;
                   }) == obu.obu_headers().end()) {
    return false;
  }
  const ObuSequenceHeader sequence_header = obu.sequence_header();
  const bool sequence_header_changed =
      !has_sequence_header_ ||
      sequence_header_.color_config.bitdepth !=
          sequence_header.color_config.bitdepth ||
      sequence_header_.color_config.is_monochrome !=
          sequence_header.color_config.is_monochrome ||
      sequence_header_.color_config.subsampling_x !=
          sequence_header.color_config.subsampling_x ||
      sequence_header_.color_config.subsampling_y !=
          sequence_header.color_config.subsampling_y ||
      sequence_header_.max_frame_width != sequence_header.max_frame_width ||
      sequence_header_.max_frame_height != sequence_header.max_frame_height;
  sequence_header_ = sequence_header;
  has_sequence_header_ = true;
  return sequence_header_changed;
}

bool DecoderImpl::MaybeInitializeWedgeMasks(FrameType frame_type) {
  if (IsIntraFrame(frame_type) || wedge_masks_initialized_) {
    return true;
  }
  if (!GenerateWedgeMask(&wedge_masks_)) {
    return false;
  }
  wedge_masks_initialized_ = true;
  return true;
}

bool DecoderImpl::MaybeInitializeQuantizerMatrix(
    const ObuFrameHeader& frame_header) {
  if (quantizer_matrix_initialized_ || !frame_header.quantizer.use_matrix) {
    return true;
  }
  if (!InitializeQuantizerMatrix(&quantizer_matrix_)) {
    return false;
  }
  quantizer_matrix_initialized_ = true;
  return true;
}

}  // namespace libgav1